This article needs additional citations for verification. (October 2021)
A metropolitan area or metro is a region consisting of a densely populated urban agglomeration and its surrounding territories sharing industries, commercial areas, transport network, infrastructures and housing. A metro area usually comprises multiple principal cities, jurisdictions and municipalities: neighborhoods, townships, boroughs, cities, towns, exurbs, suburbs, counties, districts, and even states and nations like the eurodistricts. As social, economic and political institutions have changed, metropolitan areas have become key economic and political regions.
Metropolitan areas include satellite cities, towns and intervening rural areas that are socioeconomically tied to the principal cities or urban core, typically measured by commuting patterns. Some metropolitan areas are anchored by one core city such as Paris metropolitan area (Paris), Mumbai Metropolitan Region (Mumbai (Bombay). In many cases metropolitan areas have multiple centers of close to equal importance, such as Dallas–Fort Worth metropolitan area (Dallas and Fort Worth), Islamabad–Rawalpindi metropolitan area (Islamabad and Rawalpindi), the Rhine-Ruhr in Germany and the Randstad in the Netherlands.
In the United States, the concept of the metropolitan statistical area has gained prominence. The area of Greater Washington Washington metropolitan area is an example of statistically grouping independent cities and county areas from various states to form a larger city ( The United Nations Top eighty worldwide List of largest cities) because of proximity, history and recent urban convergence. Metropolitan areas may themselves be part of larger megalopolises. For urban centres outside metropolitan areas, that generate a similar attraction at smaller scale for their region, the concept of the regiopolis and respectively regiopolitan area or regio was introduced by German professors in 2006. In the United States, the term micropolitan statistical area is used.
A metropolitan area combines an urban agglomeration (the contiguous, built-up area) with zones not necessarily urban in character, but closely bound to the center by employment or other commerce. These outlying zones are sometimes known as a commuter belt, and may extend well beyond the urban zone, to other political entities. For example, Islip, New York on Long Island is considered part of the New York metropolitan area.
In practice, the parameters of metropolitan areas, in both official and unofficial usage, are not consistent. Sometimes they are little different from an urban area, and in other cases they cover broad regions that have little relation to a single urban settlement; comparative statistics for metropolitan area should take this into account. The term "Metropolitan" can also refer to a county-level municipal government structure, with some shared services between a central city and its suburbs, which may or may not include the entirety of a metropolitan area. Population figures given for one metro area can vary by millions.
There has been no significant change in the basic concept of metropolitan areas since its adoption in 1950, although significant changes in geographic distributions have occurred since then, and more are expected. Because of the fluidity of the term "metropolitan statistical area," the term used colloquially is more often "metro service area," "metro area," or "MSA" taken to include not only a city, but also surrounding suburban, exurban and sometimes rural areas, all which it is presumed to influence. A polycentric metropolitan area contains multiple urban agglomerations not connected by continuous development. In defining a metropolitan area, it is sufficient that a city or cities form a nucleus with which other areas have a high degree of integration.
See also the many lists of metropolitan areas itemized at § Lists of metropolitan areas.
This section needs expansion. You can help by adding to it. (September 2021)
The Australian Bureau of Statistics uses Greater Capital City Statistical Areas (GCCSAs), which are geographical areas designed to represent the functional extent of each of the eight State and Territory capital cities. They were designed to reflect labour markets, using the 2011 Census "travel to work" data. Labour markets are sometimes used as proxy measures of the functional extent of a city as it contains the majority of the commuting population. GCCSAs replaced "Statistical Divisions" used until 2011.[a]
Other Metropolitan areas in Australia include cross border cities or continuous built-up areas between two or more cities that are connected by an extensive public transport network that allows for commuting for work or services. The following are such conurbations-
Perth Metropolitan Region-City of Mandurah-Pinjarra
South East Queensland
In Bangladesh, the large population centers which have significant Financial, political and administrative Importance are considered to be as Metropolitan cities, which are governed by City Corporations. In total, there are 12 City Corporations in Bangladesh. 4 of them (Dhaka North City Corporation, Dhaka South City Corporation, Narayanganj City Corporation, Gazipur City Corporation) are part of Greater Dhaka Conurbation .
In Brazil, "Metropolitan Regions", "Integrated Development Areas", and "Urban Agglomerations" are created by statute. Each state defines its own legislation for the creation, definition and organization of a metropolitan region. The creation of a metropolitan region is not for any statistical purpose, although the Brazilian Institute of Geography and Statistics (IBGE) uses them in reports. Their main purpose is to improve management of public policies of common interest to all municipalities included within. They do not have any political, electoral or jurisdictional power whatsoever, so citizens do not elect representatives for them.
The IBGE defines also "Immediate Geographic Areas" (formerly termed microregions) which capture the region "surrounding urban centers for the supply of immediate needs of the population". Intended for policy planning purposes, as of March 2021 census data is not tabulated on the level of these Areas, but instead at the municipality or state level.
Statistics Canada defines a census metropolitan area (CMA) as an area consisting of one or more adjacent municipalities situated around a major urban core. To form a CMA, the metropolitan area must have a population of at least 100,000, at least half within the urban core. To be included in the CMA, adjacent municipalities must have a high degree of integration with the core, as measured by commuter flows derived from census data.
In Chinese, there used to be no clear distinction between "megalopolis" (城市群, lit. city cluster) and "metropolitan area" (都市圈) until National Development and Reform Commission issued Guidelines on the Cultivation and Development of Modern Metropolitan Areas (关于培育发展现代化都市圈的指导意见) on Feb 19, 2019, in which a metropolitan area was defined as "an urbanized spatial form in a megalopolis dominated by (a) supercity(-ies) or megacity(-ies), or a large metropolis playing a leading part, and within the basic range of 1-hour commute area."
The European Union's statistical agency, Eurostat, has created a concept named "larger urban zone" (LUZ). The LUZ represents an attempt at a harmonised definition of the metropolitan area, and the goal was to have an area from which a significant share of the residents commute into the city, a concept known as the "functional urban region".
France's national statistics office, INSEE, names an urban core and its surrounding area of commuter influence an aire d'attraction d'une ville (or AAV, literally meaning "catchment area of a city"), plural: aires d'attraction des villes. The official translation of this statistical area in English (as used by INSEE) is "functional area". The AAV follows the same definition as the Functional Urban Area (FUA) used by Eurostat and the OECD, and the AAVs are thus strictly comparable to the FUAs.
The AAV replaced in 2020 the metropolitan statistical area called aire urbaine (AU). The AU, which was defined differently than the AAV, has now been discarded by INSEE and replaced with the AAV in order to facilitate international comparisons.
In German definition, metropolitan areas are eleven most densely populated areas in the Federal Republic of Germany. They comprise the major German cities and their surrounding catchment areas and form the political, commercial and cultural centres of the country.
For urban centres outside metropolitan areas, that generate a similar attraction at smaller scale for their region, the concept of the Regiopolis and respectively regiopolitan area or regio was introduced by German professors in 2006.
In Indonesia, the government of Indonesia defines a metropolitan area as an urban agglomeration where its spatial planning is prioritised due to its highly important influence on the country. Jakarta, Surabaya, Bandung, Semarang, Medan, Makassar, Palembang are important metropolitan area in the country. Currently, there are 10 metropolitan cities in Indonesia that have been recognized by the government.
In 2001, Italy transformed 14 provinces of some of the country's largest cities into Metropolitan Cities. Therefore, the territory of the Metropolitan City corresponds to that of a normal Italian province.
In Japan, a metropolitan area (都市圏) is a division set separately from administrative areas in order to define wide urban areas used in the Census conducted by the Statistics Bureau of the Ministry of Internal Affairs and Communications.
The Greater Tokyo Area is the most populous metropolitan area in the world.
- Central City (中心市)
If the central cities are next to each other, the areas are integrated into one large area.
- Surrounding Municipality (周辺市町村, lit. 'surrounding cities, towns and villages')
- Those are municipalities with ratios of the number of people commuting to the central city over 15 years old being 1.5% or more of the permanent population of and close to the central cities.
If a municipality is surrounded by the surrounding municipalities, it will be a surrounding municipality.
Metropolitan areas are known as zonas metropolitanas in Mexico. The National Population Council (CONAPO) defines them as:
- a set of two or more municipalities where a city with a population of at least 100,000 is located, and whose urban area, functions and activities exceed the limits of the municipality.
- municipalities with a city of more than 500,000 inhabitants, or a city of more than 200,000 inhabitants located in the northern and southern border areas and in the coastal zone.
- municipalities where state capitals are located, if they are not already included in a metropolitan zone.
As of 2018, there are 74 zonas metropolitanas in Mexico. 75.1 million people, 62.8% of the country population, live within a metropolitan area.
Pakistan has nine metropolitan areas with populations greater than a million. Seven of these are entirely in Punjab including Lahore, Faisalabad, Gujranwala, Multan, Bahawalpur, Sargodha, and Sialkot; one (Islamabad-Rawalpindi is split between Punjab and the Islamabad Capital Territory; two are located in Sindh, including Karachi, the largest metropolitan area in the country, and Hyderabad; one in Khyber Pakhtunkhwa: Peshawar; and the final in Balochistan: Quetta.
The Philippines currently has three metropolitan areas defined by the National Economic and Development Authority (NEDA). These metropolitan areas are separated into three main geographical areas; Metro Manila (which is located in Luzon), Metro Cebu (which is located in Visayas), and Metro Davao (which is located in Mindanao). The official definition of each area does not necessarily follow the actual extent of continuous urbanization. For example, the built-up area of Metro Manila has long spilled out of its officially defined borders into the adjacent provinces of Bulacan, Rizal, Laguna, and Cavite. The number of metropolitan areas in the Philippines was reduced from 13 in 2007 to the current three based from the 2017–2022 Philippine Development Plan by NEDA. The other 10 metropolitan areas were Metro Angeles, Metro Bacolod, Metro Baguio, Metro Batangas, Metro Cagayan de Oro, Metro Dagupan, Metro Iloilo–Guimaras, Metro Butuan, Metro Naga, and Metro Olongapo.
The Greater Johannesburg metropolitan area is the largest metropolitan area in South Africa. Its population was over 9.6 million as of the 2011 South Africa Census, in contrast to its urban area, which consisted of approximately 7.9 million inhabitants as of 2011. Conversely, metropolitan municipalities in South Africa are defined as commonly governed areas of a metropolitan area. The largest such metropolitan municipal government entity in South Africa is the City of Johannesburg Metropolitan Municipality, which presided over nearly 5 million people as of 2016. However, the Greater Johannesburg metropolitan area houses roughly ten times the population of its core municipal city of Johannesburg, which contained 957,441 people as of the 2011 census.
Sweden defines a metropolitan area as a group of municipalities, based on statistics of commuting between central municipalities and surrounding municipalities and taking into account existing planning cooperation in the country's three geographic regions. They were defined around 1965. In 2005, a number of further municipalities were added to the defined areas.
The word metropolitan describes a major city in Turkey like Istanbul, a city that is dominant to others both financially and socially. There are 30 officially defined "state metropolitan areas" in Turkey, for governing purposes.
The United Kingdom government's Office for National Statistics defines "travel to work areas" as areas where "at least 75% of an area's resident workforce work in the area and at least 75% of the people who work in the area also live in the area".
As of February 28, 2013, the United States Office of Management and Budget (OMB) defined 1,098 statistical areas for the metropolitan areas of the United States and Puerto Rico. These 1,098 statistical areas comprise 929 Core-Based Statistical Areas (CBSAs) and 169 Combined Statistical Areas (CSAs). The 929 Core-Based Statistical Areas are divided into 388 Metropolitan Statistical Areas (MSAs – 381 for the U.S. and seven for Puerto Rico) and 541 Micropolitan Statistical Areas (μSAs – 536 for the U.S. and five for Puerto Rico). The 169 Combined Statistical Areas (166 for the U.S. and three for Puerto Rico) each comprise two or more adjacent Core Based Statistical Areas.
The Office of Management and Budget defines a Metropolitan Statistical Area as one or more adjacent counties or county equivalents that have at least one urban area of at least 50,000 population, plus adjacent territory that has a high degree of economic and social integration with the core as measured by commuting ties. The OMB then defines a Combined Statistical Area as consisting of various combinations of adjacent metropolitan and micropolitan statistical areas with economic ties measured by commuting patterns. The Office of Management and Budget further defines a core-based statistical area (CBSA) to be a geographical area that consists of one or more counties (or equivalents) anchored by an urban center of at least 10,000 people plus adjacent counties that are socioeconomically tied to the urban center by commuting.
Lists of metropolitan areasEdit
Metropolitan planning theoriesEdit
- Material in this section was based on Australian Bureau of Statistics (ABS) data, © Commonwealth of Australia, and includes text supplied by ABS that is quoted verbatim, as permitted under Creative Commons CC BY 4.0 licence.
- Loibl, Wolfgang; Etminan, Ghazal; Gebetsroither-Geringer, Ernst; Neumann, Hans-Martin; Sanchez-Guzman, Santiago (2018). "Characteristics of Urban Agglomerations in Different Continents: History, Patterns, Dynamics, Drivers and Trends". Urban Agglomeration. doi:10.5772/intechopen.73524. ISBN 978-953-51-3897-6.
- Squires, G. Ed. Urban Sprawl: Causes, Consequences, & Policy Responses. (The urban Institute Press (2002)
- Mark, M.; Katz, B; Rahman, S.; Warren, D. (2008). "MetroPolicy: Shaping A New Federal Partnership for a Metropolitan Nation" (PDF). Brookings Institution. pp. 4–103.
- "Definition of Urban Terms" (PDF). demographia.com. Retrieved 22 October 2013.
- "List 2. PRINCIPAL CITIES OF METROPOLITAN AND MICROPOLITAN STATISTICAL AREAS, MARCH 2020". Archived from the original on 2022-03-31.
- Prof. Dr. Iris Reuther (FG Stadt- und Regionalplanung, Universität Kassel): Presentation "Regiopole Rostock". 11 December 2008, retrieved 13 June 2009 (pdf).
- "Metropolitan and Micropolitan". Retrieved 27 April 2016.
- "Whitehouse.gov". Archived from the original on July 23, 2009.
- "How services increased the economic gap between the rural and urban US". World Economic Forum. Retrieved 2022-04-19.
- Australian Bureau of Statistics (12 July 2016). "GREATER CAPITAL CITY STATISTICAL AREA (GCCSA)". Australian Statistical Geography Standard (ASGS). Canberra, ACT. 1 (1270.0.55.001). Retrieved 20 June 2021.
- "Conurbation", Wikipedia, 2021-07-26, retrieved 2021-08-02
- Muzzini, Elisa; Aparicio, Gabriela (2013). Bangladesh: The Path to Middle-Income Status from an Urban Perspective. Washington, D.C.: World Bank Publications. p. 52. ISBN 978-0-8213-9865-4.
- "Metropolitan Areas, Urban Agglomerations and Integrated Development Areas | IBGE". Brazilian Institute of Geography and Statistics. Archived from the original on 2021-04-02. Retrieved 2021-04-02.
- "Regional Divisions of Brazil | IBGE". IBGE. Archived from the original on 2021-04-02. Retrieved 2021-04-02.
- "Population Census | IBGE". www.ibge.gov.br. Retrieved 2021-04-02.
- "Census metropolitan area (CMA) and census agglomeration (CA)". Statistics Canada. 2007-12-11. Archived from the original on 2018-03-17. Retrieved 2011-03-06.
- "关于培育发展现代化都市圈的指导意见(发改规划〔2019〕328号)" (in Chinese (China)). 国家发展改革委. 2019-02-19.
- "Urbanaudit.org". Archived from the original on 2009-02-12.
- "Le nouveau zonage en aires d'attraction des villes". INSEE. Retrieved 2022-04-09.
- "Functional areas". INSEE. Retrieved 2022-04-09.
- "Metropolitan Cities of India" (PDF). Central Pollution Control Board. National Informatics Centre. p. 3. Archived from the original (PDF) on 23 September 2015. Retrieved 28 July 2014.
- "Kategori Topik Utama". Archived from the original on 2019-09-18. Retrieved 2021-06-15.
- "Delimitation of Mexico's Metropolitan Areas 2015" (in Spanish). CONAPO. Retrieved 2020-12-29.
- "Geografin i statistiken – regionala indelningar i Sverigelanguage=sv" (PDF). Statistics Sweden.
- "Türk Dil Kurumu, Yabancı Sözlere Karşılıklar Kılavuzu, "metropol"". tdkterim.gov.tr. Archived from the original on 2011-07-21.
- Metropolitan municipalities in Turkey
- Beginners' guide to UK geography - Travel to Work Areas (TTWAs) Office for National Statistics
- "OMB Bulletin No. 13-01: Revised Delineations of Metropolitan Statistical Areas, Micropolitan Statistical Areas, and Combined Statistical Areas, and Guidance on Uses of the Delineations of These Areas" (PDF). United States Office of Management and Budget. February 28, 2013. Archived (PDF) from the original on January 21, 2017. Retrieved April 2, 2013.
- The United States Office of Management and Budget (OMB) defines a Core-Based Statistical Area (CBSA) as one or more adjacent counties or county equivalents that have at least one urban core area of at least 10,000 population, plus adjacent territory that has a high degree of social and economic integration with the core as measured by commuting ties.
- The United States Office of Management and Budget (OMB) defines a Combined Statistical Area (CSA) as an aggregate of adjacent Core Based Statistical Areas that are linked by commuting ties.
- The United States Office of Management and Budget (OMB) defines a Metropolitan Statistical Area (μSA) as a Core Based Statistical Area having at least one urban cluster of at least 50,000 population, plus adjacent territory that has a high degree of social and economic integration with the core as measured by commuting ties.
- The United States Office of Management and Budget (OMB) defines a Micropolitan Statistical Area (μSA) as a Core Based Statistical Area having at least one urban cluster of at least 10,000 but less than 50,000 population, plus adjacent territory that has a high degree of social and economic integration with the core as measured by commuting ties.
- "The World's Cities in 2016" (PDF). United Nations. October 2016. (page 1 illustrates metropolitan area versus city proper and urban agglomeration)
- Metropolis.org, An organisation of world metropolises
- Urban Employment Areas in Japan (Metropolitan Employment Areas in Japan)
- Turismo.fvg.it, (Metropolis read by maps in Friuli Venezia Giulia – Northeast of Italy – EU)
- Geopolis : research group, university of Paris-Diderot, France — Urbanization of the world