Vegetable oil(Redirected from Vegetable fats and oils)
Vegetable oils, or vegetable fats, are fats extracted from seeds, or less often, from other parts of fruits. Like animal fats, vegetable fats are mixtures of triglycerides. Soybean oil, rapeseed oil, and cocoa butter are examples of fats from seeds. Olive oil, palm oil, and rice bran oil are example of fats from other parts of fruits. In common usage, vegetable oil may refer exclusively to vegetable fats which are liquid at room temperature.
Uses of triglyceride vegetable oilEdit
Oils extracted from plants have been used since ancient times and in many cultures. As an example, in a 4,000-year-old kitchen unearthed in Indiana's Charlestown State Park, archaeologist Bob McCullough of Indiana University-Purdue University Fort Wayne found evidence that large slabs of rock were used to crush hickory nuts and the oil was then extracted with boiling water. Archaeological evidence shows that olives were turned into olive oil by 6000 BC and 4500 BC in present-day Israel and Palestine.
Many vegetable oils are consumed directly, or indirectly as ingredients in food – a role that they share with some animal fats, including butter, ghee, lard, and schmaltz. The oils serve a number of purposes in this role:
- Shortening – to give pastry a crumbly texture.
- Texture – oils can serve to make other ingredients stick together less.
- Flavor – while less flavorful oils command premium prices, some oils, such as olive, sesame, or almond oil, may be chosen specifically for the flavor they impart.
- Flavor base – oils can also "carry" flavors of other ingredients, since many flavors are due to chemicals that are soluble in oil.
Secondly, oils can be heated and used to cook other foods. Oils suitable for this objective must have a high flash point. Such oils include the major cooking oils – soybean, rapeseed, canola, sunflower, safflower, peanut, cottonseed, etc. Tropical oils, such as coconut, palm, and rice bran oils, are particularly valued in Asian cultures for high-temperature cooking, because of their unusually high flash points.
Unsaturated vegetable oils can be transformed through partial or complete "hydrogenation" into oils of higher melting point. The hydrogenation process involves "sparging" the oil at high temperature and pressure with hydrogen in the presence of a catalyst, typically a powdered nickel compound. As each carbon–carbon double-bond is chemically reduced to a single bond, two hydrogen atoms each form single bonds with the two carbon atoms. The elimination of double bonds by adding hydrogen atoms is called saturation; as the degree of saturation increases, the oil progresses toward being fully hydrogenated. An oil may be hydrogenated to increase resistance to rancidity (oxidation) or to change its physical characteristics. As the degree of saturation increases, the oil's viscosity and melting point increase.
The use of hydrogenated oils in foods has never been completely satisfactory. Because the center arm of the triglyceride is shielded somewhat by the end fatty acids, most of the hydrogenation occurs on the end fatty acids, thus making the resulting fat more brittle. A margarine made from naturally more saturated oils will be more plastic (more "spreadable") than a margarine made from hydrogenated soy oil. While full hydrogenation produces largely saturated fatty acids, partial hydrogenation results in the transformation of unsaturated cis fatty acids to unsaturated trans fatty acids in the oil mixture due to the heat used in hydrogenation. Partially hydrogenated oils and their trans fats have been linked to an increased risk of mortality from coronary heart disease, among other increased health risks.
In the US, the Standard of Identity for a product labeled as "vegetable oil margarine" specifies only canola, safflower, sunflower, corn, soybean, or peanut oil may be used. Products not labeled "vegetable oil margarine" do not have that restriction.
Vegetable oils are used as an ingredient or component in many manufactured products.
Many vegetable oils are used to make soaps, skin products, candles, perfumes and other personal care and cosmetic products. Some oils are particularly suitable as drying oils, and are used in making paints and other wood treatment products. Dammar oil (a mixture of linseed oil and dammar resin), for example, is used almost exclusively in treating the hulls of wooden boats. Vegetable oils are increasingly being used in the electrical industry as insulators as vegetable oils are not toxic to the environment, biodegradable if spilled and have high flash and fire points. However, vegetable oils are less stable chemically, so they are generally used in systems where they are not exposed to oxygen, and they are more expensive than crude oil distillate. Synthetic tetraesters, which are similar to vegetable oils but with four fatty acid chains compared to the normal three found in a natural ester, are manufactured by Fischer esterification. Tetraesters generally have high stability to oxidation and have found use as engine lubricants. Vegetable oil is being used to produce biodegradable hydraulic fluid and lubricant.
One limiting factor in industrial uses of vegetable oils is that all such oils are susceptible to becoming rancid. Oils that are more stable, such as ben oil or mineral oil, are thus preferred for industrial uses. Castor oil has numerous industrial uses, owing to the presence of hydroxyl group on the fatty acid. Castor oil is a precursor to Nylon 11.
Pet food additiveEdit
Vegetable oil is used in production of some pet foods. AAFCO defines vegetable oil, in this context, as the product of vegetable origin obtained by extracting the oil from seeds or fruits which are processed for edible purposes.
Vegetable oils are also used to make biodiesel, which can be used like conventional diesel. Some vegetable oil blends are used in unmodified vehicles but straight vegetable oil, also known as pure plant oil, needs specially prepared vehicles which have a method of heating the oil to reduce its viscosity. The use of vegetable oils as alternative energy is growing and the availability of biodiesel around the world is increasing.
The production process of vegetable oil involves the removal of oil from plant components, typically seeds. This can be done via mechanical extraction using an oil mill or chemical extraction using a solvent. The extracted oil can then be purified and, if required, refined or chemically altered.
Oils can be removed via mechanical extraction, termed "crushing" or "pressing." This method is typically used to produce the more traditional oils (e.g., olive, coconut etc.), and it is preferred by most "health-food" customers in the United States and in Europe. There are several different types of mechanical extraction. Expeller-pressing extraction is common, though the screw press, ram press, and ghani (powered mortar and pestle) are also used. Oilseed presses are commonly used in developing countries, among people for whom other extraction methods would be prohibitively expensive; the ghani is primarily used in India. The amount of oil extracted using these methods varies widely, as shown in the following table for extracting mowrah butter in India:
The processing of vegetable oil in commercial applications is commonly done by chemical extraction, using solvent extracts, which produces higher yields and is quicker and less expensive. The most common solvent is petroleum-derived hexane. This technique is used for most of the "newer" industrial oils such as soybean and corn oils.
Oils may be partially hydrogenated to produce various ingredient oils. Lightly hydrogenated oils have very similar physical characteristics to regular soy oil, but are more resistant to becoming rancid. Margarine oils need to be mostly solid at 32 °C (90 °F) so that the margarine does not melt in warm rooms, yet it needs to be completely liquid at 37 °C (98 °F), so that it doesn't leave a "lardy" taste in the mouth.
Hardening vegetable oil is done by raising a blend of vegetable oil and a catalyst in near-vacuum to very high temperatures, and introducing hydrogen. This causes the carbon atoms of the oil to break double-bonds with other carbons, each carbon forming a new single-bond with a hydrogen atom. Adding these hydrogen atoms to the oil makes it more solid, raises the smoke point, and makes the oil more stable.
Hydrogenated vegetable oils differ in two major ways from other oils which are equally saturated. During hydrogenation, it is easier for hydrogen to come into contact with the fatty acids on the end of the triglyceride, and less easy for them to come into contact with the center fatty acid. This makes the resulting fat more brittle than a tropical oil; soy margarines are less "spreadable".[compared to?] The other difference is that trans fatty acids (often called trans fat) are formed in the hydrogenation reactor, and may amount to as much as 40 percent by weight of a partially hydrogenated oil. Hydrogenated oils, especially partially hydrogenated oils with their higher amounts of trans fatty acids are increasingly thought to be unhealthy.
In the processing of edible oils, the oil is heated under vacuum to near the smoke point, and water is introduced at the bottom of the oil. The water immediately is converted to steam, which bubbles through the oil, carrying with it any chemicals which are water-soluble. The steam sparging removes impurities that can impart unwanted flavors and odors to the oil. Deodorization is key to the manufacture of vegetable oils. Nearly all soybean, corn, and canola oils found on supermarket shelves go through a deodorization stage that removes trace amounts of odors and flavors, and lightens the color of the oil.
People can breathe in vegetable oil mist in the workplace. The U.S. Occupational Safety and Health Administration (OSHA) has set the legal limit (permissible exposure limit) for vegetable oil mist exposure in the workplace as 15 mg/m3 total exposure and 5 mg/m3 respiratory exposure over an 8-hour workday. The U.S. National Institute for Occupational Safety and Health (NIOSH) has set a recommended exposure limit (REL) of 10 mg/m3 total exposure and 5 mg/m3 respiratory exposure over an 8-hour workday.
|Palm oil ||4.0|
|Coconut oil ||1.4|
|Canola oil ||1.4|
|Soybean oil ||0.6|
|Sunflower oil ||0.6|
The following triglyceride vegetable oils account for almost all worldwide production, by volume. All are used as both cooking oils and as SVO or to make biodiesel. According to the USDA, the total world consumption of major vegetable oils in 2007/08 was:
|Oil source||World consumption
(million metric tons)
|Palm||41.31||The most widely produced tropical oil, also used to make biofuel|
|Soybean||41.28||One of the most widely consumed cooking oils|
|Rapeseed||18.24||One of the most widely used cooking oils, canola is a variety (cultivar) of rapeseed|
|Sunflower seed||9.91||A common cooking oil, also used to make biodiesel|
|Peanut||4.82||Mild-flavored cooking oil|
|Cottonseed||4.99||A major food oil, often used in industrial food processing|
|Palm kernel||4.85||From the seed of the African palm tree|
|Coconut||3.48||Used in cooking, cosmetics and soaps|
|Olive||2.84||Used in cooking, cosmetics, soaps and as a fuel for traditional oil lamps|
Note that these figures include industrial and animal feed use. The majority of European rapeseed oil production is used to produce biodiesel, or used directly as fuel in diesel cars which may require modification to heat the oil to reduce its higher viscosity. The suitability of the fuel should come as little surprise, as Rudolf Diesel originally designed his engine to run on peanut oil.
Other significant triglyceride oils include:
- Corn oil, one of the most common cooking oils. As of 2006 the US produced about 1.09 million metric tons  of corn oil, which is used for cooking oil, salad dressing, margarine, mayonnaise, prepared goods like spaghetti sauce and baking mixes, and to fry prepared foods like potato chips and French fries.
- Grape seed oil, used in cooking and cosmetics
- Hazelnut oil and other nut oils
- Linseed oil, from flax seeds
- Rice bran oil, from rice grains
- Safflower oil, a flavorless and colorless cooking oil
- Sesame oil, used as a cooking oil, and as a massage oil, particularly in India
- Açaí palm oil, used in culinary and cosmetics
- Jambú oil, is extracted from the flowers, leaves and stem from jambu (Acmella oleracea), contains spilanthol
- Graviola oil, derived from Annona muricata
- Tucumã oil, from Astrocaryum aculeatum is used to manufacture soap.
- Brazil nut oil, culinary and cosmetics use
- Carapa oil, pharmaceutical use and anti-mosquito candle
- Buriti oil, from Mauritia flexuosa, used in cosmetics (skin and hair care)
- Passion fruit oil, derived from Passiflora edulis, has varied applications in cosmetics manufacturing and for uses as a human or animal food.
- Pracaxi oil, obtained from Pentaclethra macroloba, cosmetics use
Composition of fatsEdit
|Monounsaturated fatty acids||Polyunsaturated fatty acids||Smoke point|
|Total mono||Oleic acid
|Total poly||linolenic acid
|Avocado||11.6||70.6||13.5||1||12.5||249 °C (480 °F)|
|Canola||7.4||63.3||61.8||28.1||9.1||18.6||238 °C (460 °F)|
|Coconut||82.5||6.3||6||1.7||175 °C (347 °F)|
232 °C (450 °F)
|Cottonseed||25.9||17.8||19||51.9||1||54||216 °C (420 °F)|
107 °C (225 °F)
166 °C (330 °F)
|Olive||13.8||73.0||71.3||10.5||0.7||9.8||193 °C (380 °F)|
|Palm||49.3||37.0||40||9.3||0.2||9.1||235 °C (455 °F)|
|Peanut||20.3||48.1||46.5||31.5||31.4||232 °C (450 °F)|
|Safflower||7.5||75.2||75.2||12.8||0||12.8||212 °C (414 °F)|
|Soybean||15.6||22.8||22.6||57.7||7||51||238 °C (460 °F)|
|Sunflower (< 60% linoleic)||10.1||45.4||45.3||40.1||0.2||39.8||
227 °C (440 °F)
|Sunflower (> 70% oleic)||9.9||83.7||82.6||3.8||0.2||3.6||
227 °C (440 °F)
|Values as percent (%) by weight of total fat.|
Such oils have been part of human culture for millennia. Poppy seed, rapeseed, linseed, almond oil, sesame seed, safflower, and cotton seed were used since at least the bronze age throughout the Middle East and Central Asia. In 1780, Carl Wilhelm Scheele demonstrated that fats were derived from glycerol. Thirty years later Michel Eugène Chevreul deduced that these fats were esters of fatty acids and glycerol.
In modern times, cottonseed oil was marketed by Procter & Gamble as a creamed shortening in 1911. Ginning mills were happy to have someone haul away the cotton seeds. The extracted oil was refined and partially hydrogenated to give a solid at room temperature and thus mimic natural lard, and can it under nitrogen gas. Compared to the rendered lard Procter & Gamble was already selling to consumers, Crisco was cheaper, easier to stir into a recipe, and could be stored at room temperature for two years without turning rancid.
Soybeans were an exciting new crop from China in the 1930s. Soy was protein-rich, and the medium viscosity oil was high in polyunsaturates. Henry Ford established a soybean research laboratory, developed soybean plastics and a soy-based synthetic wool, and built a car "almost entirely" out of soybeans. Roger Drackett had a successful new product with Windex, but he invested heavily in soybean research, seeing it as a smart investment. By the 1950s and 1960s, soybean oil had become the most popular vegetable oil in the US.
In the mid-1970s, Canadian researchers developed a low-erucic-acid rapeseed cultivar. Because the word "rape" was not considered optimal for marketing, they coined the name "canola" (from "Canada Oil low acid"). The U.S. Food and Drug Administration approved use of the canola name in January 1985, and U.S. farmers started planting large areas that spring. Canola oil is lower in saturated fats, and higher in monounsaturates and is a better source of omega-3 fats than other popular oils. Canola is very thin (unlike corn oil) and flavorless (unlike olive oil), so it largely succeeds by displacing soy oil, just as soy oil largely succeeded by displacing cottonseed oil.
Recycled oil has numerous uses, including use as a direct fuel, as well as in the production of biodiesel, soap, animal feed, pet food, detergent, and cosmetics. It is traded as the commodity, yellow grease.
Since 2002, an increasing number of European Union countries have prohibited the inclusion of recycled vegetable oil from catering in animal feed. Used cooking oils from food manufacturing, however, as well as fresh or unused cooking oil, continue to be used in animal feed.
Due to their susceptibility to oxidation from the exposure to oxygen, heat and light, resulting in the formation of oxidation products, such as peroxides and hydroperoxides, plant oils rich in polyunsaturated fatty acids have a limited shelf-life.
In Canada, palm oil is one of five vegetable oils, along with palm kernel oil, coconut oil, peanut oil and cocoa butter, which must be specifically named in the list of ingredients for a food product. Also, oils in Canadian food products which have been modified or hydrogenated must contain the word "modified" or "hydrogenated" when listed as an ingredient. A mix of oils other than the aforementioned exceptions may simply be listed as "vegetable oil" in Canada; however, if the food product is a cooking oil, salad oil or table oil, the type of oil must be specified and listing "vegetable oil" as an ingredient is not acceptable.
From December 2014, all food products produced in the European Union were legally required to indicate the specific vegetable oil used in their manufacture, following the introduction of the Food Information to Consumers Regulation.
Notes and referencesEdit
- Alfred Thomas (2002). "Fats and Fatty Oils". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a10_173.
- Parwez Saroj. The Pearson Guide to the B.Sc. (Nursing) Entrance Examination. Pearson Education India. p. 109. ISBN 81-317-1338-5.
- Robin Dand (1999). The International Cocoa Trade. Woodhead Publishing. p. 169. ISBN 1-85573-434-6.
- "4,000-year-old 'kitchen' unearthed in Indiana". Archaeo News. January 26, 2006. Retrieved 2006-07-31.
- Ruth Schuster (December 17, 2014). "8,000-year old olive oil found in Galilee, earliest known in world", Haaretz. Retrieved December 17, 2014.
- Ehud Galili et al., "Evidence for Earliest Olive-Oil Production in Submerged Settlements off the Carmel Coast, Israel", Journal of Archaeological Science 24:1141–1150 (1997); Pagnol, p. 19, says the 6th millennium in Jericho, but cites no source.
- Trans Fat Task Force (June 2006). "TRANSforming the Food Supply (Appendix 9iii)". Archived from the original on February 25, 2007. Retrieved 2007-01-09. (Consultation on the health implications of alternatives to trans fatty acids: Summary of Responses from Experts)
- "Margarine". Code of Federal Regulations Title 21, Chapter I, Subchapter B, Part 166. US Food and Drug Administration. April 1, 2011. Retrieved 2011-11-01.
- Linda McGraw (April 19, 2000). "Biodegradable Hydraulic Fluid Nears Market". USDA. Retrieved 2006-09-29.
- "Cass Scenic Railroad, West Virginia". GWWCA. Retrieved 2011-11-01.
- "The Association of American Feed Control Officials (AAFCO)".
- National Non-Food Crops Centre. GHG Benefits from Use of Vegetable Oils for Electricity, Heat, Transport and Industrial Purposes, NNFCC 10-016
- Hossain, Amjad (2012). "Kalu". In Islam, Sirajul; Jamal, Ahmed A. Banglapedia: National Encyclopedia of Bangladesh (Second ed.). Asiatic Society of Bangladesh.
- Janet Bachmann. "Oilseed Processing for Small-Scale Producers". Retrieved 2006-07-31.
- B.L. Axtell from research by R.M. Fairman (1992). "Illipe". Minor oil crops. FAO. Retrieved 2006-11-12.
- Aziz, KMA (2012). "Ghani". In Islam, Sirajul; Jamal, Ahmed A. Banglapedia: National Encyclopedia of Bangladesh (Second ed.). Asiatic Society of Bangladesh. A ghani is a traditional Indian oil press, driven by a horse or ox.
- Eisenmenger, Michael; Dunford, Nurhan T.; Eller, Fred; Taylor, Scott; Martinez, Jose (2006). "Pilot-scale supercritical carbon dioxide extraction and fractionation of wheat germ oil". Journal of the American Oil Chemists' Society. 83 (10): 863–868. doi:10.1007/s11746-006-5038-6.
- "CDC - NIOSH Pocket Guide to Chemical Hazards - Vegetable oil mist". www.cdc.gov. Retrieved 2015-11-27.
- Malaysian Palm Oil Industry, palmoilworld.org
- Oil Staple Crops Compared, gardeningplaces.com
- Global oil yields: Have we got it seriously wrong?, Denis J. Murphy, August 2009, aocs.org
- January 2009 (PDF). Oilseeds: World Market and Trade. FOP 1-09. USDA. 2009-01-12., Table 03: Major Vegetable Oils: World Supply and Distribution at Oilseeds: World Markets and Trade Monthly Circular
- Corn Refiners Association. Corn Oil 5th Edition. 2006
- "US National Nutrient Database, Release 28". United States Department of Agriculture. May 2016. All values in this column are from the USDA Nutrient database unless otherwise cited.
- "Fats and fatty acids contents per 100 g (click for "more details") example: avocado oil; user can search for other oils". Nutritiondata.com, Conde Nast for the USDA National Nutrient Database, Standard Release 21. 2014. Retrieved 7 September 2017. Values from Nutritiondata.com (SR 21) may need to be reconciled with most recent release from the USDA SR 28 as of Sept 2017.
- "Avocado oil, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- What is unrefined, extra virgin cold-pressed avocado oil?, The American Oil Chemists’ Society
- "Canola oil, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- Katragadda, H. R.; Fullana, A. S.; Sidhu, S.; Carbonell-Barrachina, Á. A. (2010). "Emissions of volatile aldehydes from heated cooking oils". Food Chemistry. 120: 59. doi:10.1016/j.foodchem.2009.09.070.
- "Coconut oil, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Corn oil, industrial and retail, all purpose salad or cooking, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- Wolke, Robert L. (May 16, 2007). "Where There's Smoke, There's a Fryer". The Washington Post. Retrieved March 5, 2011.
- "Cottonseed oil, salad or cooking, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Linseed/Flaxseed oil, cold pressed, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Efficacy of dietary hempseed oil in patients with atopic dermatitis". Journal of Dermatological Treatment. 2005. Retrieved 25 October 2017.
- "Olive oil, salad or cooking, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Palm oil, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- Vegetable Oils in Food Technology (2011), p. 61.
- "Safflower oil, salad or cooking, high oleic, primary commerce, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Soybean oil, salad or cooking, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Sunflower oil, less than 60% of total fats as linoleic acid, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Sunflower oil, high oleic - 70% or more as oleic acid, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Cottonseed oil, industrial, fully hydrogenated, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Palm oil, industrial, fully hydrogenated, filling fat, fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Soybean oil, salad or cooking, (partially hydrogenated), fat composition, 100 g". US National Nutrient Database, Release 28, United States Department of Agriculture. May 2016. Retrieved 6 September 2017.
- "Soybean Car". Popular Research Topics. Benson Ford Research Center. Retrieved 2006-10-23.
- Horstman, Barry M. (1999-05-21). "Philip W. Drackett: Earned profits, plaudits". The Cincinnati Post. E. W. Scripps Company. Archived from the original on 2005-12-05. Retrieved 2006-10-22.
- "Canola oil". Archived from the original on 2006-06-17. Retrieved 2006-07-31.
- "Waste cooking oil from catering premises". Retrieved 2006-07-31.
- H. Ramachandra Prabhu (2000). "Lipid peroxidation in culinary oils subjected to thermal stress". Indian Journal of Clinical Biochemistry. 15 (1): 1–5. doi:10.1007/BF02873539. PMC . PMID 23105229.
- Tańska, M; Roszkowska, B; Skrajda, M; Dąbrowski, G (2016). "Commercial Cold Pressed Flaxseed Oils Quality and Oxidative Stability at the Beginning and the End of Their Shelf Life". Journal of Oleo Science. 65 (2): 111–21. doi:10.5650/jos.ess15243. PMID 26782307.
- "Basic Labelling Requirements", Guide to Food Labelling and Advertising, Canadian Food Inspection Agency, retrieved 2015-04-08
- "Common Name - Fats and Oils", Labelling Requirements for Fats and Oils (PDF), Canadian Food Inspection Agency, retrieved 2015-04-08
- "Regulation (EU) No 1169/2011 of the European Parliament and of the Council", Official Journal of the European Union, 2011-11-21
- Gupta, Monoj K. (2007). Practical guide for vegetable oil processing. AOCS Press, Urbana, Illinois. ISBN 978-1-893997-90-5.
- Jee, Michael, ed. (2002). Oils and Fats Authentication. Blackwell Publishing, Oxford, England. ISBN 1-84127-330-9.
- Salunkhe, D.K., Chavan, J.K., Adsule, R.N. and Kadam, S.S. (1992). World Oilseeds – Chemistry, Technology, and Utilization. Van Nostrand Reinhold, New York. ISBN 0-442-00112-6.
|Wikimedia Commons has media related to Vegetable oils.|