Biofuel is fuel that is produced through contemporary processes from biomass, rather than by the very slow geological processes involved in the formation of fossil fuels, such as oil. Since biomass technically can be used as a fuel directly (e.g. wood logs), some people use the terms biomass and biofuel interchangeably. More often than not, however, the word biomass simply denotes the biological raw material the fuel is made of, or some form of thermally/chemically altered solid end product, like torrefied pellets or briquettes.
The word biofuel is usually reserved for liquid or gaseous fuels, used for transportation. The U.S. Energy Information Administration (EIA) follows this naming practice. Drop-in biofuels are functionally equivalent to petroleum fuels and fully compatible with the existing petroleum infrastructure. They require no engine modification of the vehicle.
Biofuel can be produced from plants (i.e. energy crops), or from agricultural, commercial, domestic, and/or industrial wastes (if the waste has a biological origin). Biofuel generally involve contemporary carbon fixation, such as those that occur in plants or microalgae through the process of photosynthesis. The greenhouse gas mitigation potential of biofuel varies considerably, from emission levels comparable to fossil fuels in some scenarios to negative emissions in others. The IPCC (Intergovernmental Panel on Climate Change) defines bioenergy as a renewable form of energy.
The two most common types of biofuel are bioethanol and biodiesel.
- Bioethanol is an alcohol made by fermentation, mostly from carbohydrates produced in sugar or starch crops such as corn, sugarcane, or sweet sorghum. Cellulosic biomass, derived from non-food sources, such as trees and grasses, is also being developed as a feedstock for ethanol production. Ethanol can be used as a fuel for vehicles in its pure form (E100), but it is usually used as a gasoline additive to increase octane and improve vehicle emissions. Bioethanol is widely used in the United States and in Brazil.
- Biodiesel is produced from oils or fats using transesterification and is the most common biofuel in Europe. It can be used as a fuel for vehicles in its pure form (B100), but it is usually used as a diesel additive to reduce levels of particulates, carbon monoxide, and hydrocarbons from diesel-powered vehicles.
In 2019, worldwide biofuel production reached 161 billion liters (43 billion gallons US), up 6% from 2018, and biofuels provided 3% of the world's fuels for road transport. The International Energy Agency want biofuels to meet more than a quarter of world demand for transportation fuels by 2050, in order to reduce dependency on petroleum. However, the production and consumption of biofuels are not on track to meet the IEA's sustainable development scenario. From 2020 to 2030 global biofuel output has to increase by 10% each year to reach IEA's goal. Only 3% growth annually is expected in the next 5 years.
First-generation biofuels are fuels made from food crops grown on arable land. The crop's sugar, starch, or oil content is converted into biodiesel or ethanol, using transesterification, or yeast fermentation.
Second-generation biofuels are fuels made from lignocellulosic or woody biomass, or agricultural residues/waste. The feedstock used to make the fuels either grow on arable land but are byproducts of the main crop, or they are grown on marginal land. Second-generation feedstocks include straw, bagasse, perennial grasses, jatropha, waste vegetable oil, municipal solid waste and so forth.
Algae can be produced in ponds or tanks on land, and out at sea. Algal fuels have high yields, can be grown with minimal impact on fresh water resources, can be produced using saline water and wastewater, have a high ignition point, and are biodegradable and relatively harmless to the environment if spilled. Production requires large amounts of energy and fertilizer, the produced fuel degrades faster than other biofuels, and it does not flow well in cold temperatures. By 2017, due to economic considerations, most efforts to produce fuel from algae have been abandoned or changed to other applications.
This class of biofuels includes electrofuels and solar fuels. Electrofuels are made by storing electrical energy in the chemical bonds of liquids and gases. The primary targets are butanol, biodiesel, and hydrogen, but include other alcohols and carbon-containing gases such as methane and butane. A solar fuel is a synthetic chemical fuel produced from solar energy. Light is converted to chemical energy, typically by reducing protons to hydrogen, or carbon dioxide to organic compounds.
The following fuels can be produced using first, second, third or fourth-generation biofuel production procedures. Most of these can be produced using two or three of the different biofuel generation procedures.
Biogas and biomethaneEdit
Biogas is methane produced by the process of anaerobic digestion of organic material by anaerobes. It can be produced either from biodegradable waste materials or by the use of energy crops fed into anaerobic digesters to supplement gas yields. The solid byproduct, digestate, can be used as a biofuel or a fertilizer. When CO
2 and other impurities are removed from biogas, it is called biomethane.
Biogas can be recovered from mechanical biological treatment waste processing systems. Landfill gas, a less clean form of biogas, is produced in landfills through naturally occurring anaerobic digestion. If it escapes into the atmosphere, it acts as a greenhouse gas.
Syngas, a mixture of carbon monoxide, hydrogen and other hydrocarbons, is produced by partial combustion of biomass, that is, combustion with an amount of oxygen that is not sufficient to convert the biomass completely to carbon dioxide and water. Before partial combustion, the biomass is dried, and sometimes pyrolysed. The resulting gas mixture, syngas, is more efficient than direct combustion of the original biofuel; more of the energy contained in the fuel is extracted.
Syngas may be burned directly in internal combustion engines, turbines or high-temperature fuel cells. The wood gas generator, a wood-fueled gasification reactor, can be connected to an internal combustion engine.
Syngas can be used to produce methanol, DME and hydrogen, or converted via the Fischer–Tropsch process to produce a diesel substitute, or a mixture of alcohols that can be blended into gasoline. Gasification normally relies on temperatures greater than 700 °C.
Biologically produced alcohols, most commonly ethanol, and less commonly propanol and butanol, are produced by the action of microorganisms and enzymes through the fermentation of sugars or starches (easiest), or cellulose (which is more difficult). Biobutanol (also called biogasoline) is often claimed to provide a direct replacement for gasoline, because it can be used directly in a gasoline engine.
Ethanol fuel is the most common biofuel worldwide, particularly in Brazil. Alcohol fuels are produced by fermentation of sugars derived from wheat, corn, sugar beets, sugar cane, molasses and any sugar or starch from which alcoholic beverages such as whiskey, can be made (such as potato and fruit waste, etc.). The ethanol production methods used are enzyme digestion (to release sugars from stored starches), fermentation of the sugars, distillation and drying. The distillation process requires significant energy input for heat (sometimes unsustainable natural gas fossil fuel, but cellulosic biomass such as bagasse, the waste left after sugar cane is pressed to extract its juice, is the most common fuel in Brazil, while pellets, wood chips and also waste heat are more common in Europe) Waste steam fuels ethanol factory – where waste heat from the factories also is used in the district heating grid.
Ethanol can be used in petrol engines as a replacement for gasoline; it can be mixed with gasoline to any percentage. Most existing car petrol engines can run on blends of up to 15% bioethanol with petroleum/gasoline. Ethanol has a smaller energy density than that of gasoline; this means it takes more fuel (volume and mass) to produce the same amount of work. An advantage of ethanol (CH
2OH) is that it has a higher octane rating than ethanol-free gasoline available at roadside gas stations, which allows an increase of an engine's compression ratio for increased thermal efficiency. In high-altitude (thin air) locations, some states mandate a mix of gasoline and ethanol as a winter oxidizer to reduce atmospheric pollution emissions.
Ethanol is also used to fuel bioethanol fireplaces. As they do not require a chimney and are "flueless", bioethanol fires are extremely useful for newly built homes and apartments without a flue. The downsides to these fireplaces is that their heat output is slightly less than electric heat or gas fires, and precautions must be taken to avoid carbon monoxide poisoning.
Corn-to-ethanol and other food stocks has led to the development of cellulosic ethanol. According to a joint research agenda conducted through the US Department of Energy, the fossil energy ratios (FER) for cellulosic ethanol, corn ethanol, and gasoline are 10.3, 1.36, and 0.81, respectively.[clarification needed]
Ethanol has roughly one-third lower energy content per unit of volume compared to gasoline. This is partly counteracted by the better efficiency when using ethanol (in a long-term test of more than 2.1 million km, the BEST project found FFV vehicles to be 1–26% more energy efficient than petrol cars, but the volumetric consumption increases by approximately 30%, so more fuel stops are required).
Methanol is currently produced from natural gas, a non-renewable fossil fuel. In the future it is hoped to be produced from biomass as biomethanol. This is technically feasible, but the production is currently being postponed for concerns that the economic viability is still pending. The methanol economy is an alternative to the hydrogen economy to be contrasted with today's hydrogen production from natural gas.
9OH) is formed by ABE fermentation (acetone, butanol, ethanol) and experimental modifications of the process show potentially high net energy gains with butanol as the only liquid product. Butanol will produce more energy than ethanol because of its lower oxygen content and allegedly can be burned "straight" in existing gasoline engines (without modification to the engine or car), and is less corrosive and less water-soluble than ethanol, and could be distributed via existing infrastructures. DuPont and BP are working together to help develop butanol. Escherichia coli strains have also been successfully engineered to produce butanol by modifying their amino acid metabolism. One drawback to butanol production in E. coli remains the high cost of nutrient rich media, however, recent work has demonstrated E. coli can produce butanol with minimal nutritional supplementation.
Biodiesel is the most common biofuel in Europe. It is produced from oils or fats using transesterification and is a liquid similar in composition to fossil/mineral diesel. Chemically, it consists mostly of fatty acid methyl (or ethyl) esters (FAMEs). Feedstocks for biodiesel include animal fats, vegetable oils, soy, rapeseed, jatropha, mahua, mustard, flax, sunflower, palm oil, hemp, field pennycress, Pongamia pinnata and algae. Pure biodiesel (B100, also known as "neat" biodiesel) currently reduces emissions with up to 60% compared to diesel Second generation B100. As of 2020[update], researchers at Australia's CSIRO have been studying safflower oil as an engine lubricant, and researchers at Montana State University's Advanced Fuels Center in the US have been studying the oil's performance in a large diesel engine, with results described as a "game-changer".
Biodiesel can be used in any diesel engine when mixed with mineral diesel. It can also be used in its pure form (B100) in diesel engines, but some maintenance and performance problems may then occur during wintertime utilization, since the fuel becomes somewhat more viscous at lower temperatures, depending on the feedstock used.
In some countries, manufacturers cover their diesel engines under warranty for B100 use, although Volkswagen of Germany, for example, asks drivers to check by telephone with the VW environmental services department before switching to B100. In most cases, biodiesel is compatible with diesel engines from 1994 onwards, which use 'Viton' (by DuPont) synthetic rubber in their mechanical fuel injection systems. Note however, that no vehicles are certified for using pure biodiesel before 2014, as there was no emission control protocol available for biodiesel before this date.
Electronically controlled 'common rail' and 'Unit Injector' type systems from the late 1990s onwards may only use biodiesel blended with conventional diesel fuel. These engines have finely metered and atomized multiple-stage injection systems that are very sensitive to the viscosity of the fuel. Many current-generation diesel engines are made so that they can run on B100 without altering the engine itself, although this depends on the fuel rail design. Since biodiesel is an effective solvent and cleans residues deposited by mineral diesel, engine filters may need to be replaced more often, as the biofuel dissolves old deposits in the fuel tank and pipes. It also effectively cleans the engine combustion chamber of carbon deposits, helping to maintain efficiency. In many European countries, a 5% biodiesel blend is widely used and is available at thousands of gas stations. Biodiesel is also an oxygenated fuel, meaning it contains a reduced amount of carbon and higher hydrogen and oxygen content than fossil diesel. This improves the combustion of biodiesel and reduces the particulate emissions from unburnt carbon. However, using pure biodiesel may increase NOx-emissions
Biodiesel is also safe to handle and transport because it is non-toxic and biodegradable, and has a high flash point of about 300 °F (148 °C) compared to petroleum diesel fuel, which has a flash point of 125 °F (52 °C).
In the US, more than 80% of commercial trucks and city buses run on diesel. The emerging US biodiesel market is estimated to have grown 200% from 2004 to 2005. "By the end of 2006 biodiesel production was estimated to increase fourfold [from 2004] to more than" 1 billion US gallons (3,800,000 m3).
In France, biodiesel is incorporated at a rate of 8% in the fuel used by all French diesel vehicles. Avril Group produces under the brand Diester, a fifth of 11 million tons of biodiesel consumed annually by the European Union. It is the leading European producer of biodiesel.
Green diesel is produced through hydrocracking biological oil feedstocks, such as vegetable oils and animal fats. Hydrocracking is a refinery method that uses elevated temperatures and pressure in the presence of a catalyst to break down larger molecules, such as those found in vegetable oils, into shorter hydrocarbon chains used in diesel engines. It may also be called renewable diesel, hydrotreated vegetable oil (HVO fuel) or hydrogen-derived renewable diesel. Unlike biodiesel, green diesel has exactly the same chemical properties as petroleum-based diesel. It does not require new engines, pipelines or infrastructure to distribute and use, but has not been produced at a cost that is competitive with petroleum. Gasoline versions are also being developed. Green diesel is being developed in Louisiana and Singapore by ConocoPhillips, Neste Oil, Valero, Dynamic Fuels, and Honeywell UOP as well as Preem in Gothenburg, Sweden, creating what is known as Evolution Diesel.
Straight vegetable oilEdit
Straight unmodified edible vegetable oil is generally not used as fuel, but lower-quality oil has been used for this purpose. Used vegetable oil is increasingly being processed into biodiesel, or (more rarely) cleaned of water and particulates and then used as a fuel.
As with 100% biodiesel (B100), to ensure the fuel injectors atomize the vegetable oil in the correct pattern for efficient combustion, vegetable oil fuel must be heated to reduce its viscosity to that of diesel, either by electric coils or heat exchangers. This is easier in warm or temperate climates. MAN B&W Diesel, Wärtsilä, and Deutz AG, as well as a number of smaller companies, such as Elsbett, offer engines that are compatible with straight vegetable oil, without the need for after-market modifications.
Vegetable oil can also be used in many older diesel engines that do not use common rail or unit injection electronic diesel injection systems. Due to the design of the combustion chambers in indirect injection engines, these are the best engines for use with vegetable oil. This system allows the relatively larger oil molecules more time to burn. Some older engines, especially Mercedes, are driven experimentally by enthusiasts without any conversion. A handful of drivers have experienced limited success with earlier pre-"Pumpe Duse" VW TDI engines and other similar engines with direct injection. Several companies, such as Elsbett or Wolf, have developed professional conversion kits and successfully installed hundreds of them over the last decades.
Oils and fats can be hydrogenated to give a diesel substitute. The resulting product is a straight-chain hydrocarbon with a high cetane number, low in aromatics and sulfur and does not contain oxygen. Hydrogenated oils can be blended with diesel in all proportions. They have several advantages over biodiesel, including good performance at low temperatures, no storage stability problems and no susceptibility to microbial attack.
Bioethers (also referred to as fuel ethers or oxygenated fuels) are cost-effective compounds that act as octane rating enhancers."Bioethers are produced by the reaction of reactive iso-olefins, such as iso-butylene, with bioethanol." Bioethers are created from wheat or sugar beets. They also enhance engine performance, while significantly reducing engine wear and toxic exhaust emissions. Although bioethers are likely to replace petroethers in the UK, it is highly unlikely they will become a fuel in and of itself due to the low energy density. By greatly reducing the amount of ground-level ozone emissions, they contribute to air quality.
When it comes to transportation fuel there are six ether additives: dimethyl ether (DME), diethyl ether (DEE), methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME), and tert-amyl ethyl ether (TAEE).
The European Fuel Oxygenates Association (EFOA) identifies methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE) as the most commonly used ethers in fuel to replace lead. Ethers were introduced in Europe in the 1970s to replace the highly toxic compound. Although Europeans still use bioether additives, the US no longer has an oxygenate requirement therefore bioethers are no longer used as the main fuel additive.
Biofuels and the environmentEdit
A biofuel project is said to be carbon-neutral if the CO2 absorbed by the crop compensate for the greenhouse gas (GHG) emissions related to the project. CO2 is the most important of the greenhouse gases, and there is approximately 27% carbon in CO2 (12/44). This includes any emissions caused by direct or indirect land use change. Many first generation biofuel projects are not carbon neutral given this definition. Some have even higher emissions than some fossil based alternatives.
It is the total amount of absorption and emissions that together determines if the GHG life cycle cost of a biofuel project is positive, neutral or negative. If emissions during production, processing, transport and combustion are higher than what is absorbed, both above and below ground during crop growth, the GHG life cycle cost is positive. Likewise, if total absorption is higher than total emissions, the life cycle cost is negative.
Whitaker et al. argue that a miscanthus crop with a yield of 10 tonnes per hectare per year sequesters so much carbon that the crop more than compensates for both farm operations emissions and transport emissions. (The emissions originating from combustion are fully absorbed by next seasons' above-ground plant growth.) The top chart on the right displays two CO2 negative miscanthus production pathways, and two CO2 positive poplar production pathways, represented in gram CO2-equivalents per megajoule. The bars are sequential and move up and down as atmospheric CO2 is estimated to increase and decrease. The grey/blue bars represent agriculture, processing and transport related emissions, the green bars represents soil carbon change, and the yellow diamonds represent total final emissions.
Successful sequestration is dependent on planting sites, as the best soils for sequestration are those that are currently low in carbon. The varied results displayed in the graph highlights this fact. For the UK, successful sequestration is expected for arable land over most of England and Wales, with unsuccessful sequestration expected in parts of Scotland, due to already carbon rich soils (existing woodland) plus lower yields. Soils already rich in carbon includes peatland and mature forest. Grassland can also be carbon rich, however Milner et al. argue that the most successful carbon sequestration in the UK takes place below improved grasslands. The bottom chart displays the estimated yield necessary to achieve CO2 negativity for different levels of existing soil carbon saturation. The higher the yield, the more likely CO2 negativity becomes.
In general, substance or energy is considered pollution when released into the environment at a rate faster than the environment can disperse, dilute, decompose, recycle, or store it in some harmless form. Based on this definition, both fossil fuels and some traditional biofuels are polluting the environment. For instance, the IPCC argues that the traditional use of wood in cook stoves and open fires produces pollutants, which can lead to severe health and environmental consequences. However, a shift to modern bioenergy contribute to improved livelihoods and can reduce land degradation and impacts on ecosystem services.[a] According to the IPCC, there is strong evidence that modern bioenergy has "large positive impacts" on air quality. When combusted in industrial facilities, most of the pollutants originating from woody biomass reduce by 97-99%, compared to open burning. A study of the giant brown haze that periodically covers large areas in South Asia determined that two thirds of it had been principally produced by residential cooking and agricultural burning, and one third by fossil-fuel burning.
Power production compared to other renewablesEdit
To calculate land use requirements for different kinds of power production, it is essential to know the relevant area-specific power densities. Smil estimates that the average area-specific power densities for biofuels, wind, hydro and solar power production are 0.30 W/m2, 1 W/m2, 3 W/m2 and 5 W/m2, respectively (power in the form of heat for biofuels, and electricity for wind, hydro and solar). The average human power consumption on ice-free land is 0.125 W/m2 (heat and electricity combined), although rising to 20 W/m2 in urban and industrial areas. The reason for the low area-specific power density for biofuels is a combination of low yields and only partial utilization of the plant when making liquid fuels (for instance, ethanol is typically made from sugarcane's sugar content or corn's starch content, while biodiesel is often made from rapeseed and soybean's oil content).
Smil estimates the following densities:
- Winter wheat (USA) 0.08 W/m2 
- Corn 0.26 W/m2 (yield 10 t/ha) 
- Wheat (Germany) 0.30 W/m2 
- Miscanthus x giganteus 0.40 W/m2 (yield 15 t/ha) 
- Sugarcane (Brazil) 0.50 W/m2 (yield 80 t/ha wet) 
- Rapeseed 0.12 W/m2 (EU average)
- Rapeseed (adjusted for energy input, the Netherlands) 0.08 W/m2 
- Sugar beets (adjusted for energy input, Spain) 0.02 W/m2 
Combusting solid biomass is more energy efficient than combusting biofuel (liquids), as the whole plant is utilized. For instance, corn plantations producing solid biomass for combustion generate more than double the amount of power per square metre compared to corn plantations producing for ethanol, when the yield is the same: 10 t/ha generates 0.60 W/m2 and 0.26 W/m2 respectively. Oven dry biomass in general have a calorific content of roughly 18 GJ/t, and every t/ha of dry biomass yield increases a plantation's power production by 0.06 W/m2.
As mentioned above, Smil estimates that the world average for wind, hydro and solar power production is 1 W/m2, 3 W/m2 and 5 W/m2 respectively. In order to match these power densities, plantation yields must reach 17 t/ha, 50 t/ha and 83 t/ha for wind, hydro and solar respectively. This seems achievable for tropical plantations – Smil estimate that large scale plantations with eucalyptus, acacia, leucaena, pinus and dalbergia in tropical and subtropical regions yield 20–25 t/ha, equivalent to 1.20–1.50 W/m2. It also seems achievable for elephant grasses, e.g. miscanthus (10–40 t/ha, or 0.6–2.4 W/m2), and napier (15–80 t/ha, or 0.9–4.8 W/m2), but unlikely for forest and many other types of biomass crops – Smil's estimate for natural temperate mixed forests is 1.5–2 dry tonnes per hectare (2–2,5 m3, equivalent to 0.1 W/m2), ranging from 0.9 m3 in Greece to 6 m3 in France).
- Aviation biofuel
- Bioenergy Europe
- BioEthanol for Sustainable Transport
- Biofuels Center of North Carolina
- Biogas powerplant
- Ecological sanitation
- International Renewable Energy Agency
- List of biofuel companies and researchers
- List of emerging technologies
- List of vegetable oils used for biofuel
- Renewable energy by country
- Renewable Energy Transition
- Residue-to-product ratio
- Sustainable aviation fuel
- Sustainable transport
- Table of biofuel crop yields
- The IEA states: "Biofuels are transportation fuels such as ethanol and biodiesel that are made from biomass materials." https://www.eia.gov/energyexplained/index.php?page=biofuel_home
- Karatzos, Sergios; McMillan, James D.; Saddler, Jack N. (July 2014). The Potential and Challenges of Drop-in Biofuels (PDF). IEA Bioenergy Task 39. p. 2. ISBN 978-1-910154-07-6. Report T39-T1. Archived (PDF) from the original on 12 November 2017. Retrieved 9 October 2018.
- "Alternative Fuels Data Center: Renewable Hydrocarbon Biofuels". afdc.energy.gov.
- "What is biofuel? definition and meaning". BusinessDictionary.com. Retrieved 30 May 2015.
- "Renewable Energy Sources and Climate Change Mitigation. Special Report of the Intergovernmental Panel on Climate Change" (PDF). IPCC.
- "Transport biofuels". IEA.
- Javed, M.R., Bilal, M.J., Ashraf, M.U.F., Waqar, A., Mehmood, M.A., Saeed, M. and Nashat, N. (2019) "Microalgae as a Feedstock for Biofuel Production: Current Status and Future Prospects" In: Top 5 Contributions in Energy Research and Development, third edition, chapter 2, Avid Science. ISBN 978-93-88170-77-2. Material was copied from this source, which is available under a Creative Commons Attribution 4.0 International License.
- "What are – and who's making – 2G, 3G and 4G biofuels? : Biofuels Digest - biofuels, biodiesel, ethanol, algae, jatropha, green gasoline, green diesel, and biocrude daily news". 21 May 2010. Archived from the original on 21 May 2010.
- i.e. arid lands in case of jatropha, or hilly terrain not accessible by tractor, ... in case of grasses, woody crops ...
- "Biofuels – Second Generation Biofuels". biofuel.org.uk. Retrieved 18 January 2018.
- "Biofuel from Algae: The Pros and Cons of Pond Scum". Thomasnet®. Retrieved 25 October 2020.
- "Biomass - Offshore wind farms = seaweed = biofuel". Renewable Energy Magazine, at the heart of clean energy journalism. 14 September 2020. Retrieved 16 October 2020.
- Greenwell, H. C.; Laurens, L. M. L.; Shields, R. J.; Lovitt, R. W.; Flynn, K. J. (2009). "Placing microalgae on the biofuels priority list: A review of the technological challenges". Journal of the Royal Society Interface. 7 (46): 703–726. doi:10.1098/rsif.2009.0322. PMC 2874236. PMID 20031983.
- Yang, Jia; Xu, Ming; Zhang, Xuezhi; Hu, Qiang; Sommerfeld, Milton; Chen, YongShen (2010). "Life-cycle analysis on biodiesel production from microalgae: Water footprint and nutrients balance" (PDF). Bioresource Technology. 10 (1): 159–65. doi:10.1016/j.biortech.2010.07.017. PMID 20675125. Archived from the original (PDF) on 27 February 2012.
- Cornell, Clayton B. (29 March 2008). "First Algae Biodiesel Plant Goes Online: 1 April 2008". Gas 2.0. Retrieved 10 June 2008.
- Dinh, L. T. T.; Guo, Y.; Mannan, M. S. (2009). "Sustainability evaluation of biodiesel production using multicriteria decision-making". Environmental Progress & Sustainable Energy. 28: 38–46. doi:10.1002/ep.10335.
- Demirbas, A. (2011). "Biodiesel from oilgae, biofixation of carbon dioxide by microalgae: A solution to pollution problems". Applied Energy. 88 (10): 3541–3547. doi:10.1016/j.apenergy.2010.12.050.
- Demirbas, AH (2009). "Inexpensive oil and fats feedstocks for production of biodiesel". Energy Education Science and Technology Part A: Energy Science and Research. 23: 1–13.
- Wesoff, Eric (19 April 2017). "Hard Lessons From the Great Algae Biofuel Bubble". Retrieved 5 August 2017.
- Ethanol for instance can be produced using 1G, 2G and 3G procedures
- Redman, G., The Andersons Centre. "Assessment of on-farm AD in the UK", National Non-Food Crops Centre, 9 June 2008. Retrieved 2009-05-11.
- "BIOGAS: No bull, manure can power your farm." Farmers Guardian (25 September 2009): 12. General OneFile. Gale.
- Evans, G. "Liquid Transport Biofuels – Technology Status Report", National Non-Food Crops Centre, 14 April 2008. Retrieved 2009-05-11.
- Electricity from wood through the combination of gasification and solid oxide fuel cells, PhD Thesis by Florian Nagel, Swiss Federal Institute of Technology Zurich, 2008
- Energikunskap | Lär dig mer om energi – E.ON
- Bio ethanol fires information bio ethanol fireplace. (2009)
- see "Breaking the Biological Barriers to Cellulosic Ethanol"
- Brinkman, N. et al., "Well-to-Wheels Analysis of Advanced/Vehicle Systems", 2005.
- Farrell, A.E.; et al. (2006). "Ethanol can Contribute to Energy and Environmental Goals". Science. 311 (5760): 506–8. Bibcode:2006Sci...311..506F. doi:10.1126/science.1121416. PMID 16439656. S2CID 16061891.
- Hammerschlag, R (2006). "Ethanol's Energy Return on Investment: A Survey of the Literature 1999-Present". Environ. Sci. Technol. 40 (6): 1744–50. Bibcode:2006EnST...40.1744H. doi:10.1021/es052024h. PMID 16570592.
- Börjesson.P. et al. 2013, REPORT f3 2013:13, p 170
- Schmidt-Rohr, K. (2015). "Why Combustions Are Always Exothermic, Yielding About 418 kJ per Mole of O2", J. Chem. Educ. 92: 2094–2099. http://dx.doi.org/10.1021/acs.jchemed.5b00333
- "ButylFuel, LLC Main Page". Butanol.com. 15 August 2005. Retrieved 14 July 2010.
- Evans, Jon (14 January 2008). "Biofuels aim higher". Biofuels, Bioproducts and Biorefining (BioFPR). Retrieved 3 December 2008.
- Pontrelli, Sammy; Fricke, Riley C.B.; Sakurai, Sana Subhan Memon; Putri, Sastia Prama; Fitz-Gibbon, Sorel; Chung, Matthew; Wu, Hsin-Yi; Chen, Yu-Ju; Pellegrini, Matteo; Fukusaki, Eiichiro; Liao, James C. (2018). "Directed strain evolution restructures metabolism for 1-butanol production in minimal media". Metabolic Engineering. 49: 153–163. doi:10.1016/j.ymben.2018.08.004. PMID 30107263.
- "Perstop Press release: Verdis Polaris Aura – second generation B100 – The advanced green one". Archived from the original on 4 August 2014. Retrieved 21 June 2014.
- Lee, Tim (7 June 2020). "Safflower oil hailed by scientists as possible recyclable, biodegradable replacement for petroleum". ABC News. Landline. Australian Broadcasting Corporation. Retrieved 7 June 2020.
- "ADM Biodiesel: Hamburg, Leer, Mainz". Biodiesel.de. Retrieved 14 July 2010.
- RRI Limited for Biodiesel Filling Stations. "Welcome to Biodiesel Filling Stations". Biodieselfillingstations.co.uk. Archived from the original on 14 July 2018. Retrieved 14 July 2010.
- Nylund.N-O & Koponen.K. 2013. Fuel and Technology Alternatives for Buses. Overall Energy Efficiency and Emission Performance. IEA Bioenergy Task 46. Possibly the new emission standards Euro VI/EPA 10 will lead to reduced NOx-levels also when using B100.
- "Biofuels Facts". Hempcar.org. Archived from the original on 20 May 2011. Retrieved 14 July 2010.
- THE FUTURIST, Will Thurmond. July–August 2007
- Avril Group : Activity Report 2014, p. 58 harvnb error: no target: CITEREFAvril_Group_:_Activity_Report2014 (help)
- EurObserv’ER 2014, p. 4 harvnb error: no target: CITEREFEurObserv’ER2014 (help)
- Brown, Robert; Jennifer Holmgren. "Fast Pyrolysis and Bio-Oil Upgrading" (PDF). Retrieved 15 March 2012.
- "Alternative & Advanced Fuels". US Department of Energy. Retrieved 7 March 2012.
- Knothe, Gerhard (2010). "Biodiesel and renewable diesel: A comparison". Progress in Energy and Combustion Science. Cite journal requires
- "Green Diesel v. Biodiesel".
- Jessica, Ebert. "Breakthroughs in Green Gasoline Production". Biomass Magazine. Retrieved 14 August 2012.
- Albrecht, KO; Hallen, RT (March 2011). "A Brief Literature Overview of Various Routes to Biorenewable Fuels from Lipids for the National Alliance of Advanced Biofuels and Bio-products NAAB Consortium" (PDF). Prepared by the US Department of Energy. Cite journal requires
- "Preem makes major investment in green diesel at the Port of Gothenburg – Port of Gothenburg". August 2014. Archived from the original on 1 August 2014.
- "Wal-Mart To Test Hybrid Trucks". Sustainable Business. 3 February 2009.
- Rock, Kerry; Maurice Korpelshoek (2007). "Bioethers Impact on the Gasoline Pool". Digital Refining. Retrieved 15 February 2014.
- "Biofuels - Types of Biofuels - Bioethers". biofuel.org.uk.
- "Biofuels – Types of Biofuels – Bioethers". Retrieved 30 May 2015.
- "Council Directive 85/536/EEC of 5 December 1985 on crude-oil savings through the use of substitute fuel components in petrol". Eur-lex.europa.eu. Retrieved 14 July 2010.
- "Microsoft Word - IA 55 EN.doc" (PDF). Retrieved 14 July 2010.
- Sukla, Mirtunjay Kumar; Thallada Bhaskar; A.K. Jain; S.K. Singal; M.O. Garg. "Bio-Ethers as Transportation Fuel: A Review" (PDF). Indian Institute of Petroleum Dehradun. Retrieved 15 February 2014.
- "What are Bio-Ethers?" (PDF). . The European Fuel Oxygenates Association. Archived from the original (PDF) on 6 March 2014.
- "Gasoline". Environmental Protection Agency.
- "C vs CO2". Energy Education. 30 April 2018. Retrieved 19 October 2020.
- «The environmental costs and benefits of bioenergy have been the subject of significant debate, particularly for first‐generation biofuels produced from food (e.g. grain and oil seed). Studies have reported life‐cycle GHG savings ranging from an 86% reduction to a 93% increase in GHG emissions compared with fossil fuels (Searchinger et al., 2008; Davis et al., 2009; Liska et al., 2009; Whitaker et al., 2010). In addition, concerns have been raised that N2O emissions from biofuel feedstock cultivation could have been underestimated (Crutzen et al., 2008; Smith & Searchinger, 2012) and that expansion of feedstock cultivation on agricultural land might displace food production onto land with high carbon stocks or high conservation value (i.e. iLUC) creating a carbon debt which could take decades to repay (Fargione et al., 2008). Other studies have shown that direct nitrogen‐related emissions from annual crop feedstocks can be mitigated through optimized management practices (Davis et al., 2013) or that payback times are less significant than proposed (Mello et al., 2014). However, there are still significant concerns over the impacts of iLUC, despite policy developments aimed at reducing the risk of iLUC occurring (Ahlgren & Di Lucia, 2014; Del Grosso et al., 2014).» Whitaker, J., Field, J. L., Bernacchi, C. J., Cerri, C. E., Ceulemans, R., Davies, C. A., DeLucia, E. H., Donnison, I. S., McCalmont, J. P., Paustian, K., Rowe, R. L., Smith, P., Thornley, P. and McNamara, N. P. (2018), Consensus, uncertainties and challenges for perennial bioenergy crops and land use. GCB Bioenergy, 10: 150–164. https://doi.org/10.1111/gcbb.12488
- «The impact of growing bioenergy and biofuel feedstock crops has been of particular concern, with some suggesting the greenhouse gas (GHG) balance of food crops used for ethanol and biodiesel may be no better or worse than fossil fuels (Fargione et al., 2008; Searchinger et al., 2008). This is controversial, as the allocation of GHG emissions to the management and the use of coproducts can have a large effect on the total carbon footprint of resulting bioenergy products (Whitaker et al., 2010; Davis et al., 2013). The potential consequences of land use change (LUC) to bioenergy on GHG balance through food crop displacement or 'indirect' land use change (iLUC) are also an important consideration (Searchinger et al., 2008).» Milner, S., Holland, R. A., Lovett, A., Sunnenberg, G., Hastings, A., Smith, P., Wang, S. and Taylor, G. (2016), Potential impacts on ecosystem services of land use transitions to second‐generation bioenergy crops in GB. GCB Bioenergy, 8: 317–333. https://doi.org/10.1111/gcbb.12263
- «While the initial premise regarding bioenergy was that carbon recently captured from the atmosphere into plants would deliver an immediate reduction in GHG emission from fossil fuel use, the reality proved less straightforward. Studies suggested that GHG emission from energy crop production and land-use change might outweigh any CO2 mitigation (Searchinger et al., 2008; Lange, 2011). Nitrous oxide (N2O) production, with its powerful global warming potential (GWP), could be a significant factor in offsetting CO2 gains (Crutzen et al., 2008) as well as possible acidification and eutrophication of the surrounding environment (Kim & Dale, 2005). However, not all biomass feedstocks are equal, and most studies critical of bioenergy production are concerned with biofuels produced from annual food crops at high fertilizer cost, sometimes using land cleared from natural ecosystems or in direct competition with food production (Naik et al., 2010). Dedicated perennial energy crops, produced on existing, lower grade, agricultural land, offer a sustainable alternative with significant savings in greenhouse gas emissions and soil carbon sequestration when produced with appropriate management (Crutzen et al., 2008; Hastings et al., 2008, 2012; Cherubini et al., 2009; Don- dini et al., 2009a; Don et al., 2012; Zatta et al., 2014; Rich- ter et al., 2015).» McCalmont, J. P., Hastings, A., McNamara, N. P., Richter, G. M., Robson, P., Donnison, I. S. and Clifton‐Brown, J. (2017), Environmental costs and benefits of growing Miscanthus for bioenergy in the UK. GCB Bioenergy, 9, page 490. https://doi.org/10.1111/gcbb.12294
- «A life‐cycle perspective of the relative contributions and variability of soil carbon stock change and nitrogen‐related emissions to the net GHG intensity (g CO2‐eq MJ−1) [gram CO2-equivalents per megajoule] of biofuel production via select production pathways (feedstock/prior land‐use/fertilizer/conversion type). Positive and negative contributions to life‐cycle GHG emissions are plotted sequentially and summed as the net GHG intensity for each biofuel scenario, relative to the GHG intensity of conventional gasoline (brown line) and the 50% and 60% GHG savings thresholds (US Renewable Fuel Standard and Council Directive 2015/1513); orange and red lines, respectively. Default life‐cycle GHG source estimates are taken from Wang et al. (2012) and Dunn et al. (2013); direct N2O emissions from Fig. 1; and soil carbon stock change (0–100 cm depth) from Qin et al. (2016). See Appendix S1 for detailed methods.» Whitaker, J., Field, J. L., Bernacchi, C. J., Cerri, C. E., Ceulemans, R., Davies, C. A., DeLucia, E. H., Donnison, I. S., McCalmont, J. P., Paustian, K., Rowe, R. L., Smith, P., Thornley, P. and McNamara, N. P. (2018), Consensus, uncertainties and challenges for perennial bioenergy crops and land use. GCB Bioenergy, 10: 150–164. https://doi.org/10.1111/gcbb.12488
- «Whilst these values represent the extremes, they demonstrate that site selection for bioenergy crop cultivation can make the difference between large GHG savings or losses, shifting life‐cycle GHG [green house gas] emissions above or below mandated thresholds. Reducing uncertainties in ∆C [carbon increase or decrease] following LUC [land use change] is therefore more important than refining N2O [nitrous oxide] emission estimates (Berhongaray et al., 2017). Knowledge on initial soil carbon stocks could improve GHG savings achieved through targeted deployment of perennial bioenergy crops on low carbon soils (see section 2). […] The assumption that annual cropland provides greater potential for soil carbon sequestration than grassland appears to be over‐simplistic, but there is an opportunity to improve predictions of soil carbon sequestration potential using information on the initial soil carbon stock as a stronger predictor of ∆C [change in carbon amount] than prior land use.» Whitaker, J., Field, J. L., Bernacchi, C. J., Cerri, C. E., Ceulemans, R., Davies, C. A., DeLucia, E. H., Donnison, I. S., McCalmont, J. P., Paustian, K., Rowe, R. L., Smith, P., Thornley, P. and McNamara, N. P. (2018), Consensus, uncertainties and challenges for perennial bioenergy crops and land use. GCB Bioenergy, 10: 150–164. https://doi.org/10.1111/gcbb.12488
- «Fig. 3 confirmed either no change or a gain of SOC [soil organic carbon] (positive) through planting Miscanthus on arable land across England and Wales and only a loss of SOC (negative) in parts of Scotland. The total annual SOC change across GB in the transition from arable to Miscanthus if all nonconstrained land was planted with would be 3.3 Tg C yr−1 [3.3 million tonnes carbon per year]. The mean changes for SOC for the different land uses were all positive when histosols were excluded, with improved grasslands yielding the highest Mg C ha−1 yr−1 [tonnes carbon per hectare per year] at 1.49, followed by arable lands at 1.28 and forest at 1. Separating this SOC change by original land use (Fig. 4) reveals that there are large regions of improved grasslands which, if planted with bioenergy crops, are predicted to result in an increase in SOC. A similar result was found when considering the transition from arable land; however for central eastern England, there was a predicted neutral effect on SOC. Scotland, however, is predicted to have a decrease for all land uses, particularly for woodland due mainly to higher SOC and lower Miscanthus yields and hence less input.» Milner, S., Holland, R. A., Lovett, A., Sunnenberg, G., Hastings, A., Smith, P., Wang, S. and Taylor, G. (2016), Potential impacts on ecosystem services of land use transitions to second‐generation bioenergy crops in GB. GCB Bioenergy, 8: 317–333. https://doi.org/10.1111/gcbb.12263
- "pollution - Definition, History, & Facts". Encyclopedia Britannica. Retrieved 17 October 2020.
- IPCC 2019d, p. 628.
- Springsteen, Bruce; Christofk, Tom; Eubanks, Steve; Mason, Tad; Clavin, Chris; Storey, Brett (January 2011). "Emission Reductions from Woody Biomass Waste for Energy as an Alternative to Open Burning". Journal of the Air & Waste Management Association. 61 (1): 63–68. doi:10.3155/1047-32220.127.116.11. PMID 21305889.
- Gustafsson, O.; Krusa, M.; Zencak, Z.; Sheesley, R. J.; Granat, L.; Engstrom, E.; Praveen, P. S.; Rao, P. S. P.; Leck, C.; Rodhe, H. (23 January 2009). "Brown Clouds over South Asia: Biomass or Fossil Fuel Combustion?". Science. 323 (5913): 495–498. Bibcode:2009Sci...323..495G. doi:10.1126/science.1164857. PMID 19164746. S2CID 44712883.
- Smil 2015, p. 211, box 7.1.
- Smil 2015, p. 170.
- Smil 2015, p. 2095 (kindle location).
- Smil 2015, p. 228.
- Smil 2015, p. 89.
- Smil 2015, p. 91.
- Smil 2015, p. 227.
- Smil 2015, p. 90.
- Smil 2015, p. 229.
- Smil 2015, pp. 80, 89.
- Ghose 2011, p. 263.
- Cf. Smil's estimate of 0.60 W/m2 for the 10 t/ha yield above. The calculation is: Yield (t/ha) multiplied with energy content (GJ/t) divided by seconds in a year (31 556 926) multiplied with the number of square metres in one hectare (10 000).
- Smil 2015, p. 85.
- Smil 2008, p. 75-76.
- «Traditional biomass (fuelwood, charcoal, agricultural residues, animal dung) used for cooking and heating by some 2.8 billion people (38% of global population) in non-OECD countries accounts for more than half of all bioenergy used worldwide (IEA 2017; REN21 2018) (Cross-Chapter Box 7 in Chapter 6). Cooking with traditional biomass has multiple negative impacts on human health, particularly for women, children and youth (Machisa et al. 2013; Sinha and Ray 2015; Price 2017; Mendum and Njenga 2018; Adefuye et al. 2007) and on household productivity, including high workloads for women and youth (Mendum and Njenga 2018; Brunner et al. 2018; Hou et al. 2018; Njenga et al. 2019). Traditional biomass is land-intensive due to reliance on open fires, inefficient stoves and overharvesting of woodfuel, contributing to land degradation, losses in biodiversity and reduced ecosystem services (IEA 2017; Bailis et al. 2015; Masera et al. 2015; Specht et al. 2015; Fritsche et al. 2017; Fuso Nerini et al. 2017). Traditional woodfuels account for 1.9–2.3% of global GHG emissions, particularly in ‘hotspots’ of land degradation and fuelwood depletion in eastern Africa and South Asia, such that one-third of traditional woodfuels globally are harvested unsustainably (Bailis et al. 2015). Scenarios to significantly reduce reliance on traditional biomass in developing countries present multiple co-benefits (high evidence, high agreement), including reduced emissions of black carbon, a short-lived climate forcer that also causes respiratory disease (Shindell et al. 2012). A shift from traditional to modern bioenergy, especially in the African context, contributes to improved livelihoods and can reduce land degradation and impacts on ecosystem services (Smeets et al. 2012; Gasparatos et al. 2018; Mudombi et al. 2018).» IPCC 2019a.
- Smil, Vaclav (2008). Energy in nature and society. General energetics of complex systems. The MIT Press.
- Broek, Richard van den (1996). "Biomass combustion for power generation". Biomass and Bioenergy. Elsevier BV. 11 (4): 271–281. doi:10.1016/0961-9534(96)00033-5. ISSN 0961-9534.
- Ghose, Mrinal K. (2011). Speight, James (ed.). The Biofuels Handbook. Cambridge: Royal Society of Chemistry, The Ingram Publisher Services distributor. ISBN 978-1-84973-026-6. OCLC 798795266.
- Smil, Vaclav (2015). Power density: a key to understanding energy sources and uses. Cambridge, Massachusetts: The MIT Press. ISBN 978-0-262-02914-8. OCLC 897401827.
- IPCC (2019a). "Climate Change and Land: an IPCC special report on climate change, desertification, land degradation, sustainable land management, food security, and greenhouse gas fluxes in terrestrial ecosystems. Land Degradation" (PDF).
- IPCC (2019d). "Climate Change and Land: an IPCC special report on climate change, desertification, land degradation, sustainable land management, food security, and greenhouse gas fluxes in terrestrial ecosystems. Chapter 6. Interlinkages between desertification, land degradation, food security and GHG fluxes: synergies, trade-offs and integrated response options" (PDF).
- GA Mansoori, N Enayati, LB Agyarko (2016), Energy: Sources, Utilization, Legislation, Sustainability, Illinois as Model State, World Sci. Pub. Co., ISBN 978-981-4704-00-7
- Caye Drapcho; Nhuan Phú Nghiêm; Terry Walker (August 2008). Biofuels Engineering Process Technology. [McGraw-Hill]. ISBN 978-0-07-148749-8.
- IChemE Energy Conversion Technology Subject Group (May 2009). A Biofuels Compendium. [IChemE]. ISBN 978-0-85295-533-8. Archived from the original on 19 July 2011.
- Fuel Quality Directive Impact Assessment
- Biofuels Journal
- Mitchell, Donald (2010). Biofuels in Africa: Opportunities, Prospects, and Challenges. The World Bank, Washington, D.C. ISBN 978-0-8213-8516-6. Archived from the original (Available in PDF) on 11 August 2011. Retrieved 8 February 2011.
- Li, H.; Cann, A. F.; Liao, J. C. (2010). "Biofuels: Biomolecular Engineering Fundamentals and Advances". Annual Review of Chemical and Biomolecular Engineering. 1: 19–36. doi:10.1146/annurev-chembioeng-073009-100938. PMID 22432571.
|Look up biofuel in Wiktionary, the free dictionary.|
- Alternative Fueling Station Locator (EERE)
- Towards Sustainable Production and Use of Resources: Assessing Biofuels by the United Nations Environment Programme, October 2009.
- Biofuels guidance for businesses, including permits and licences required on NetRegs.gov.uk
- How Much Water Does It Take to Make Electricity?—Natural gas requires the least water to produce energy, some biofuels the most, according to a new study.
- International Conference on Biofuels Standards – European Union Biofuels Standardization
- Biofuels from Biomass: Technology and Policy Considerations Thorough overview from MIT
- The Guardian news on biofuels
- The US DOE Clean Cities Program – links to the 87 US Clean Cities coalitions, as of 2004.
- Biofuels Factsheet by the University of Michigan's Center for Sustainable Systems
- Learn Biofuels – Educational Resource for Students