Talk:Éolienne Bollée

Latest comment: 6 years ago by InternetArchiveBot in topic External links modified (January 2018)

three throw pump

edit

In the operation section it says

At the lower end this drives a horizontal shaft through a gearbox, which typically drives three throw pump.

The end of this sentence makes no sense. Should it be "free flow pump"? (Not that I'm saying such a thing exists, but the words as they are make no sense at all.)

91.108.13.67 (talk) 12:43, 26 January 2008 (UTC)Reply

Three throw pump is correct - i.e. a pump with three pistons operated by a crankshaft. Mjroots (talk) 12:50, 26 January 2008 (UTC)Reply

I fixed the wording so that the sentence makes good English sense and doesn't need an obscure footnote. Mjroots immediately put it back to weird. Now it is your turn to decide it you want to try to fix this.

It should read something like this:

The rotor is turned by the wind, and through a bevel wheel drives a shaft inside the column (if used) or in the centre of the tower. At the lower end this drives a horizontal shaft through a gearbox, which typically drives a pump crankshaft via three pistons.<ref name=Book/>

-96.237.79.6 (talk) 17:33, 13 September 2010 (UTC)Reply

Three throw pump is perfectly normal engineer's English. Your revised version above implies that the crankshaft is driven by three pistons, not that it drives three pistons. Ghughesarch (talk) 00:42, 22 November 2010 (UTC)Reply

Why the stator?

edit

The article makes a big deal of the fact that it has a stator, but doesn't explain what that is or why the device has one. Can anyone clarify? --Doradus (talk) 13:27, 26 January 2008 (UTC)Reply


Ehm , all wind turbines have a stator and rotor but the terms are used differently, this is referring to waterpumping turbines which would usually use a shaft and piston type pump, if you click on 'rotor' it shows you more ... Aicchalmers (talk) 13:49, 26 January 2008 (UTC)Reply

The Axial compressor article, which deals mainly with jet engines, shows how the flow of gas goes through a series of rotors and stators. A modern wind turbine has the rotor part, but the wind does not pass through a stator before hitting the rotor (blades) of the wind turbine. On the éolienne, the wind passes through a fixed ring of blades (the stator) before driving the sails (rotor). This is its unique feature.Mjroots (talk) 15:17, 26 January 2008 (UTC)Reply

New section added explaining the significance of the stator.Mjroots (talk) 15:30, 26 January 2008 (UTC)Reply

WP:FRANCE

edit

Hi, I assessed this article for WP:France and wanted to mention that I think it looks great. Maybe a copy edit here and there, but otherwise very informative and interesting. Lazulilasher (talk) 17:27, 30 January 2008 (UTC)Reply

Bollee

edit

Thank you for recording this technology. To evaluate it it would be useful to know the height the 3.53m model was pumping to for the flow rates and windspeeds given. Also whether with the modular construction the rotor and stator blades were the same size.

I will try to refer to this page in my current paper in Wind Engineering on Contra-Rotating windmills if the editor will allow me to make the addition. Dr. Simon Farthing spfd@cantab.net 199.243.30.162 (talk) 19:46, 19 November 2010 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just added archive links to one external link on Éolienne Bollée. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 00:13, 23 January 2016 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Éolienne Bollée. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 06:44, 26 January 2018 (UTC)Reply