Talk:Braid-breaker

Latest comment: 3 years ago by Spinningspark in topic Common mode

Neither of the examples given is a true braid breaker

edit

A true braid-beaker breaks the DC path so to block low frequency currents.

It usually consists of two tightly coupled coils which pass the signal, but break the DC path.

Typically they will be a pair of bifilar windings on a toroid, or two loops of coax taped together.

The former can be seen at bottom of https://www.mm0zif.org.uk/training-zone/advanced/filters/

The later is also known as a "Faraday Loop", see https://www.qsl.net/g4wpw/loop.jpg.

Gutta Percha (talk) 10:13, 20 September 2019 (UTC)Reply

edit

Hello fellow Wikipedians,

I have just added archive links to one external link on Braid-breaker. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 18:06, 29 February 2016 (UTC)Reply

Common mode

edit

Interference induced into a braid of a coax is not common mode since nothing has been induced into the inner conductor. It is true that the design of braid-breaker choke described here can block common-mode interference in a power cable but this article claims it is about TV interference from the antenna downlead so that is not directly relevant. In any case, a power cable does not have a braid, so there is no braid that needs breaking. SpinningSpark 20:00, 27 October 2021 (UTC)Reply