This article contains too many pictures, charts or diagrams for its overall length.Learn how and when to remove this template message)(
In the days before mass production, handguns were often considered a badge of office, much the same as a sword. As they had limited utility and were more expensive than the long-guns of the era, handguns were carried only by the very few who could afford to purchase them. However, in 1836, Samuel Colt patented the Colt Paterson, the first practical mass-produced revolver. It was capable of firing 5 shots in rapid succession and very quickly became a popular defensive weapon, giving rise to the saying "God created men, but Colt made them equal." Today, in most of the world, handguns are generally considered self-defence weapons used primarily by police and military officers. However, in the United States and many other countries around the world, handguns are also widely available to civilians and commonly carried for self-defence.
Firearms first appeared in China where gunpowder was first developed. The oldest known bronze barrel handgun is the Heilongjiang hand cannon, dated to 1288. It is 34 cm (13.4 inches) long without a handle and weighs 3.55 kg (7.83 pounds). The diameter of the interior at the end of the barrel is 2.5 cm (1.0 inch). The barrel is the lengthiest part of the hand cannon and is 6.9 inches long.
The hand cannon has a bulbous base at the breech called the yaoshi (藥室) or gunpowder chamber, where the explosion that propels the projectile occurs. The diameter of the Heilongjiang hand-gun's powder chamber is 6.6 cm (2.6 inches). The walls of the powder chamber are noticeably thicker to better withstand the explosive pressure of the gunpowder. The powder chamber also has a touch hole, a small hole for the fuse that ignites the gunpowder. Behind the gunpowder chamber is a socket shaped like a trumpet where the handle of the hand cannon is inserted. The bulbous shape of the base gave the earliest Chinese and Western cannons a vase-like or pear-like appearance, which gradually disappeared when advancements in metallurgical technology made the bulbous base obsolete.
The matchlock appeared in Europe in the mid-15th century. The matchlock was the first mechanism invented to facilitate the firing of a hand-held firearm. The classic European matchlock gun held a burning slow match in a clamp at the end of a small curved lever known as the serpentine. Upon the pulling of a lever (or in later models a trigger) protruding from the bottom of the gun and connected to the serpentine, the clamp dropped down, lowering the smoldering match into the flash pan and igniting the priming powder. The flash from the primer traveled through the touch hole igniting the main charge of propellant in the gun barrel.
On release of the lever or trigger, the spring-loaded serpentine would move in reverse to clear the pan. For obvious safety reasons the match would be removed before reloading of the gun. Both ends of the match were usually kept alight in case one end should be accidentally extinguished.
The wheellock was the next major development in firearms technology after the matchlock and the first self-igniting firearm. Its name is from its rotating steel wheel to provide ignition. Developed in Europe around 1500, it was used alongside the matchlock.
The wheellock works by spinning a spring-loaded steel wheel against a piece of pyrite to generate intense sparks, which ignite gunpowder in a pan, which flashes through a small touchhole to ignite the main charge in the firearm's barrel. The pyrite is clamped in vise jaws on a spring-loaded arm (or 'dog'), which rests on the pan cover. When the trigger is pulled, the pan cover is opened, and the wheel is rotated, with the pyrite pressed into contact.
A close modern analogy of the wheellock mechanism is the operation of a cigarette lighter, where a toothed steel wheel is spun in contact with a piece of sparking material to ignite the liquid or gaseous fuel.
A wheellock firearm had the advantage that it can be instantly readied and fired even with one hand, in contrast to the then-common matchlock firearms, which must have a burning cord of slow match ready if the gun might be needed and demanded the operator's full attention and two hands to operate. On the other hand, wheellock mechanisms were complex to make, making them relatively expensive.
A flintlock is a general term for any firearm that uses a flint striking ignition mechanism. The term may also apply to a particular form of the mechanism itself, that was introduced in the early 17th century, and rapidly replaced earlier firearm-ignition technologies, such as the matchlock and the wheellock.
Flintlock pistols were used as self-defense weapons and as a military arm. Their effective range was short, and they were frequently used as an adjunct to a sword or cutlass. Pistols were usually smoothbore although some rifled pistols were produced.
Flintlock pistols came in a variety of sizes and styles which often overlap and are not well defined, many of the names we use having been applied by collectors and dealers long after the pistols were obsolete. The smallest were less than 15 cm (5.9 inches) long and the largest were over 51 cm (20 inches). From around the beginning of the 1700s the larger pistols got shorter, so that by the late 1700s the largest would be more like 41 cm (16 inches) long. The smallest would fit into a typical pocket or a hand warming muff and could easily be carried.
The largest sizes would be carried in holsters across a horse's back just ahead of the saddle. In-between sizes included the coat pocket pistol, or coat pistol, which would fit into a large pocket, the coach pistol, meant to be carried on or under the seat of a coach in a bag or box, and belt pistols, sometimes equipped with a hook designed to slip over a belt or waistband. Larger pistols were called horse pistols. Arguably the most elegant of the pistol designs was the Queen Anne pistol, which was made in all sizes.
Probably the high point of the mechanical development of the flintlock pistol was the English duelling pistol; it was highly reliable, water resistant and accurate. External decoration was minimal but craftsmanship was evident, and the internal works were often finished to a higher degree of craftsmanship than the exterior. Duelling pistols were the size of the horse pistols of the late 1700s, around 41 cm (16 inches) long and were usually sold in pairs along with accessories in a wooden case with compartments for each piece.
The caplock mechanism or percussion lock was developed in the early 19th century and used a percussion cap struck by the hammer to set off the main charge, rather than using a piece of flint to strike a steel frizzen. They succeed the flintlock mechanism in firearm technology.
The rudimentary percussion system was developed by Reverend Alexander John Forsyth as a solution to the problem that birds would startle when smoke puffed from the powder pan of his flintlock shotgun, giving them sufficient warning to escape the shot.
His invention of a fulminate-primed firing mechanism deprived the birds of their early warning system, both by avoiding the initial puff of smoke from the flintlock powder pan, as well as shortening the interval between the trigger pull and the shot leaving the muzzle. Forsyth patented his ignition system in 1807. However, it was not until after Forsyth's patents expired that the conventional percussion cap system was developed.
The caplock offered many improvements over the flintlock. The caplock was easier to load, more resistant to weather, and was much more reliable than the flintlock. Many older flintlock weapons were later converted into caplocks so that they could take advantage of this increased reliability.
The caplock mechanism consists of a hammer, similar to the hammer used in a flintlock, and a nipple (sometimes referred to as a "cone"), which holds a small percussion cap. The nipple contains a tube which goes into the barrel. The percussion cap contains a chemical compound called mercury fulminate or fulminate of mercury, whose chemical formula is Hg(ONC)2. It is made from mercury, nitric acid and alcohol. When the trigger releases the hammer, it strikes the cap, causing the mercuric fulminate to explode. The flames from this explosion travel down the tube in the nipple and enter the barrel, where they ignite the main powder charge.
In 1836, Samuel Colt patented the Colt Paterson, the first practical mass-produced revolver. It uses a revolving cylinder with multiple chambers aligned with a single, stationary barrel. Initially, this 5-shot revolver was produced in .28 calibre, with a .36 calibre model following a year later. As originally designed and produced, no loading lever was included with the revolver; a user had to partially disassemble the revolver to re-load it. Starting in 1839, however, a reloading lever and a capping window were incorporated into the design, allowing reloading without requiring partial disassembly of the revolver. This loading lever and capping window design change was also incorporated after the fact into most Colt Paterson revolvers that had been produced from 1836 until 1839. Unlike later revolvers, a folding trigger was incorporated into the Colt Paterson. The trigger only became visible upon cocking the hammer.
Colt would go on to make a series of improved revolvers. The Colt Walker, was a single-action revolver with a revolving cylinder holding six charges of black powder behind six bullets (typically .44 caliber lead balls). It was designed in 1846 as a collaboration between Captain Samuel Hamilton Walker and American firearms inventor Samuel Colt. The 1847 Colt Walker was the largest and most powerful black powder repeating handgun ever made.
The Colt 1851 Navy Revolver is a cap and ball revolver that was designed by Samuel Colt between 1847 and 1850. The six-round .36 caliber Navy revolver was much lighter than the contemporary Colt Dragoon Revolvers developed from the .44 Walker Colt revolvers of 1847, which, given their size and weight, were generally carried in saddle holsters. It is an enlarged version of the .31 caliber Colt Pocket Percussion Revolvers, that evolved from the earlier Baby Dragoon, and, like them, is a mechanically improved and simplified descendant of the 1836 Paterson revolver. As the factory designation implied, the Navy revolver was suitably sized for carrying in a belt holster. It became very popular in North America at the time of Western expansion. Colt's aggressive promotions distributed the Navy and his other revolvers across Europe, Asia, and Africa. The .36 caliber (.375–.380 inch) round lead ball weighs 80 grains and, at a velocity of 1,000 feet per second, is comparable to the modern .380 pistol cartridge in power. Loads consist of loose powder and ball or bullet, metallic foil cartridges (early), and combustible paper cartridges (Civil War era), all combinations being ignited by a fulminate percussion cap applied to the nipples at the rear of the chamber.
The Colt Army Model 1860 is a 6-shot muzzle-loaded cap & ball .44-caliber single-action revolver used during the American Civil War made by Colt's Manufacturing Company. It was used as a side arm by cavalry, infantry, artillery troops, and naval forces. More than 200,000 were manufactured from 1860 through 1873. Colt's biggest customer was the US Government with no less than 129,730 units being purchased and issued to the troops. The weapon was a single-action, six-shot weapon accurate up to 75 to 100 yards, where the fixed sights were typically set when manufactured. The rear sight was a notch in the hammer, only usable when the revolver was fully cocked. The Colt .44-caliber “Army" Model was the most widely used revolver of the Civil War. It had a six-shot, rotating cylinder, and fired a 0.454-inch-diameter (11.5 mm) round spherical lead ball, or a conical-tipped bullet, typically propelled by a 30-grain charge of black powder, which was ignited by a small copper percussion cap that contained a volatile charge of fulminate of mercury (a substance that explodes upon being subjected to a sharp impact). The percussion cap, when struck by the hammer, ignited the powder charge. When fired, balls had a muzzle velocity of about 900 feet per second (274 meters/second), although this depended on how much powder it was loaded with.
Metallic cartridge eraEdit
The Smith & Wesson Model 1 was the first firearm manufactured by Smith & Wesson, with production spanning the years 1857 through 1882. It was the first commercially successful revolver to use metallic rimfire cartridges instead of loose powder, musket ball, and percussion caps. It is a single-action, tip-up revolver holding seven .22 Short black powder cartridges.
The Smith & Wesson Model No. 2 Army is a 6-shot, .32 caliber revolver, intended to combine the small size and convenience of the Smith & Wesson Model 1 .22 rimfire with a larger more effective cartridge. It was manufactured 1861 – 1874, with a total production of 77,020.
The Smith & Wesson Model 3 was a 6-shot, single-action, cartridge-firing, top-break revolver produced by Smith & Wesson from circa 1870 to 1915, and was recently again offered as a reproduction by Smith & Wesson and Uberti. The S&W Model 3 was originally chambered for the .44 S&W American and .44 Russian cartridges, and typically did not have the cartridge information stamped on the gun (as is standard practice for most commercial firearms). Model 3 revolvers were later produced in an assortment of calibers, including .44 Henry Rimfire, .44-40, .32–44, .38–44, and .45 Schofield. The design would influence the smaller S&W .38 Single Action that is retroactively referred to as the Model 2. All of these revolvers would automatically eject the spent shell cases when opened.
The Colt Single Action Army, also known as the Single Action Army, SAA, Model P, Peacemaker, M1873, and Colt .45 is a single-action revolver with a revolving cylinder holding six metallic cartridges. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company — today's Colt's Manufacturing Company — and was adopted as the standard military service revolver until 1892. The Colt SAA has been offered in over 30 different calibers and various barrel lengths. Its overall appearance has remained consistent since 1873. Colt has discontinued its production twice, but brought it back due to popular demand. The revolver was popular with ranchers, lawmen, and outlaws alike, but as of the early 21st century, models are mostly bought by collectors and Cowboy Action Shooters. Its design has influenced the production of numerous other models from other companies. The Colt SAA "Peacemaker" revolver is a famous piece of Americana known as "The Gun That Won the West".
In 1889, Colt introduced the Model 1889, the first truly modern double action revolver, which differed from earlier double action revolvers by having a "swing-out" cylinder, as opposed to a "top-break" or "side-loading" cylinder. Swing out cylinders quickly caught on, because they combined the best features of earlier designs. Top-break actions gave the ability to eject all empty shells simultaneously and exposed all chambers for easy reloading, but having the frame hinged into two halves weakened the gun and negatively affected accuracy, due to lack of rigidity. "Side-loaders", like the earlier Colt Model 1871 and 1873, gave a rigid frame, but required the user to eject and load one cylinder at a time, as they rotated the cylinder to line each chamber up with the side-mounted loading gate.
Smith & Wesson followed 7 years later with the ''Hand Ejector, Model 1896'' in .32 S&W Long caliber, followed by the very similar, yet improved, Model 1899 (later known as the Model 10), which introduced the new .38 Special cartridge. The Model 10 went on to become the best selling handgun of the 20th century, at 6,000,000 units, and the .38 Special is still the most popular chambering for revolvers in the world. These new guns were an improvement over the Colt 1889 design since they incorporated a combined center-pin and ejector rod to lock the cylinder in position. The 1889 did not use a center pin and the cylinder was prone to move out of alignment.
The Smith & Wesson Model 36 is a 5 shot, revolver chambered for .38 Special. It is one of several models of "J-frame" Smith & Wesson revolvers. It was introduced in 1950, and is still in production. The Model 36 was designed in the era just after World War II, when Smith & Wesson stopped producing war materials and resumed normal production. For the Model 36, they sought to design a revolver that could fire the more powerful .38 Special round in a small, concealable package. Since the older I-frame was not able to handle this load, a new frame was designed, which became the Smith & Wesson J-frame.
The post-war periods in the 20th century were times of great innovation. In 1935 Smith and Wesson released the Smith & Wesson Model 27 which was the first revolver chambered for .357 Magnum. It was designed as a more powerful handgun for law enforcement officers. The Model 27 started the "Magnum Era" of handguns. The high point was in 1955 when the company created the Smith & Wesson Model 29 in .44 Magnum. Two decades later the Dirty Harry movies made this gun a cultural icon. The S&W Model 19 was also introduced in 1955, it is a .357 Magnum revolver produced by Smith & Wesson on its K-frame design. The Model 19 is smaller and lighter than the original the S&W Model 27 .357 Magnums. It was made at the behest of retired Assistant Chief Patrol Inspector of the U.S. Border Patrol, famous gunfighter, and noted firearms and shooting skills writer Bill Jordan.
The original Philadelphia Deringer was a single-shot muzzleloading percussion cap pistol introduced in 1852, by Henry Deringer. In total, approximately 15,000 Deringer pistols were manufactured. All were single barrel pistols with back action percussion locks, typically .41 caliber with rifled bores, and walnut stocks. Barrel length varied from 1.5" to 6", and the hardware was commonly a copper-nickel alloy known as "German silver".
The term derringer (//) has become a genericized misspelling of the last name of Henry Deringer. Many copies of the original Philadelphia Deringer pistol were made by other gun makers worldwide, and the name was often misspelled; this misspelling soon became an alternative generic term for any pocket pistol, along with the generic phrase palm pistol, which Deringer's competitors invented and used in their advertising. With the advent of metallic cartridges, pistols produced in the modern form still commonly called "derringers".
Daniel Moore patented a single shot metallic cartridge .38 Rimfire derringer in 1861. These pistols have barrels that pivoted sideways on the frame to allow access to the breech for reloading. Moore would manufacture them until 1865, when he sold out to National Arms Company which produced single shot .41 Rimfire derringers until 1870, when it was acquired by Colt's Patent Firearms Manufacturing Company. Colt continued to produce the .41 Rimfire derringer after the acquisition, as an effort to help break into the metallic-cartridge gun market, but also introduced its own three single shot Colt Derringer Models, all of them also chambered in the .41 Rimfire cartridge. The last model to be in production, the third Colt Derringer, was not dropped until 1912. The third Colt Derringer Model was re-released in the 1950s for western movies, under the name of Fourth Model Colt Deringer.
The Remington Model 95 derringer was one of the first metallic cartridge handguns. Small and easy to use, Remington manufactured more than 150,000 of these over-under double-barreled derringers from 1866 until the end of their production in 1935. The Remington derringer doubled the capacity of the derringers designed by Daniel Moore, while maintaining a compact size. The Remington Model 95 has achieved such widespread popularity, that it has completely overshadowed its predecessors, becoming synonymous with the word "derringer". The Model 95 was made only in .41 Rimfire. Its barrels pivoted upwards to reload and a cam on the hammer alternated between top and bottom barrels. The .41 Rimfire bullet moved very slowly, at about 425 feet per second (130 m/s), around half the speed of a modern .45 ACP. It could be seen in flight, but at very close range, such as at a casino or saloon card table, it could easily kill. There were four models with several variations. The Remington derringer design is still being made; in a variety of calibers from .22 long rifle to .45 Long Colt and .410 gauge, by several manufacturers. The current production of derringers are used by Cowboy Action Shooters as well as a concealed-carry weapon.
While the classic Remington design is a single-action derringer with a hammer and tip-up action, the High Standard D-100 introduced in 1962, is a hammer-less, double-action derringer with a half-trigger-guard and a standard break action design. These double-barrel derringers were chambered for .22 Long Rifle and .22 Magnum and were available in blued, nickel, silver, and gold plated finishes. Although, they were discontinued in 1984, American Derringer would obtain the High Standard design in 1990 and produce a larger .38 Special version. These derringers called the DS22 and DA38 are still made and are popular concealed carry handguns.
The COP .357 is a modern 4-shot Derringer-type pistol chambered for .357 Magnum. Introduced in 1983, it is a double-action weapon about twice as wide, and substantially heavier than the typical .25 automatic pistol. Still, it is relatively compact size and a powerful cartridge makes it an effective defensive weapon or a police backup gun. The COP .357 is quite robust in design and construction. It is made of solid stainless steel components. Cartridges are loaded into the four separate chambers by sliding a latch that "pops-up" the barrel for loading purposes, similar to top-break shotguns. Each of the four chambers has its own dedicated firing pin. It uses an internal hammer, which is activated by depressing the trigger to hit a ratcheting/rotating striker that in turn strikes one firing pin at a time. Older "pepperboxes" also used multiple barrels, but the barrels were the part that rotated. The COP .357 operates similarly to the Sharps derringer of the 1850s, in that it uses the ratcheting/rotating striker, which is completely internal, to fire each chamber in sequence.
In 1896, Paul Mauser introduced the Mauser C96 "Broomhandle", the first mass-produced and commercially successful semi-automatic pistol, which uses the recoil energy of one shot to reload the next. The distinctive characteristics of the C96 are the integral 10-round, box magazine in front of the trigger, the long barrel, the wooden shoulder stock which gives it the stability of a short-barreled rifle and doubles as a holster or carrying case, and a unique grip shaped like the handle of a broom. The grip earned the gun the nickname "broomhandle" in the English-speaking world, because of its round wooden handle.
The Pistole Parabellum, commonly known in the United States as just the Luger. It is a toggle-locked recoil-operated semi-automatic pistol produced in several models and by several nations from 1898 to 1948. It was one of the first semi-auto pistols to use a detachable magazine housed in the pistol-grip. The design was first patented by Georg Luger as an improvement upon the Borchardt Automatic Pistol, and was produced as the Parabellum Automatic Pistol, Borchardt-Luger System by the German arms manufacturer Deutsche Waffen- und Munitionsfabriken (DWM). The first production model was known as the Modell 1900 Parabellum. Later versions included the Pistol Parabellum Model 1908 or P08 which was produced by DWM and other manufacturers. The first Parabellum pistol was adopted by the Swiss army in May 1900. In German Army service, the Parabellum was later adopted in modified form as the Pistol Model 1908 (P08) in caliber 9×19mm Parabellum.
The Colt Model 1911 is a 7+1-round, single-action, semi-automatic, magazine-fed, recoil-operated pistol chambered for the .45 ACP cartridge. It served as the standard-issue sidearm for the United States Armed Forces from 1911 to 1986, however, due to its popularity, it has not been completely phased out. Designed by John Browning, the M1911 is the best-known of his designs to use the short recoil principle in its basic design. The pistol was widely copied, and this operating system rose to become the preeminent type of the 20th century and of nearly all modern centerfire pistols. It is popular with civilian shooters in competitive events such as USPSA, IDPA, International Practical Shooting Confederation, and Bullseye shooting. Compact variants are popular civilian concealed carry weapons in the U.S. because of the design's relatively slim width and stopping power of the .45 ACP cartridge.
The Walther PP (Polizeipistole, or police pistol) series pistols were introduced in 1929 and are among the world's first successful double action, blowback-operated semi-automatic pistols, developed by the German arms manufacturer Carl Walther GmbH Sportwaffen. They feature exposed hammers, a traditional double-action trigger mechanism, a single-stack 8-round magazine (for .32 ACP version), and a fixed barrel that also acts as the guide rod for the recoil spring. The Walther PP and smaller PPK models were both popular with European police and civilians for being reliable and concealable. They would remain the standard issue police pistol for much of Europe well into the 1970s and 80s. During World War II, they were issued to the German military, including the Luftwaffe.
The Browning Hi Power is a 13+1-round, single-action, semi-automatic handgun available in 9mm. Introduced in 1935, it is based on a design by American firearms inventor John Browning, and completed by Dieudonné Saive at Fabrique Nationale (FN) of Herstal, Belgium. Browning died in 1926, several years before the design was finalized. The Hi-Power is one of the most widely used military pistols in history, having been used by the armed forces of over 50 countries. The Hi Power name alludes to the 13-round magazine capacity, almost twice that of contemporary designs such as the Luger or Colt M1911. The Browning was one of the first pistols to use high capacity, detachable magazines.
The Heckler & Koch VP70 was introduced in 1970, it is an 18+1-round, 9×19mm, blowback-operated, double-action-only, select-fire, polymer frame pistol manufactured by German arms firm Heckler & Koch GmbH. The VP70 was a revolutionary pistol, introducing the polymer frame, predating the Glock by 12 years. It also uses a spring-loaded striker, instead of a conventional firing pin and has a relatively heavy double-action-only the trigger pull. It also uses a high-capacity 18-round magazine, twice as many rounds as the single-column magazine designs of the era, and 5 more rounds than the Browning Hi-Power. In lieu of a blade front sight, the VP70 uses a polished ramp with a central notch in the middle to provide the illusion of a dark front post. Contrary to a common misconception, the VP70 does indeed have a manual safety. It is the circular button located immediately behind the trigger and it's a common crossblock safety. One unique feature of this weapon involved the combination stock/holster for the military version of the VP70. The stock incorporates a selector switch that, when mounted, allows for a three-round-burst mode of fire. Cyclic rate of fire for the burst is 2200 rounds per minute. When not mounted, the stock acts as a holster. VP stands for Volkspistole (literally "People's Pistol"), and the designation 70 was for the first year of production: 1970.
The Smith & Wesson Model 59 was a 14+1round, semi-automatic pistol introduced in 1971. It was the first standard double-action pistol to use a high-capacity 14-round staggered-magazine. It went out of production a decade later in 1980 when the improved second generation series was introduced (the Model 459). The Model 59 was manufactured in 9×19mm Parabellum caliber with a wider anodized aluminum frame (to accommodate a double-stack magazine), a straight backstrap, a magazine disconnect (the pistol will not fire unless a magazine is in place), and a blued carbon steel slide that carries the manual safety. The grip is of three pieces made of two nylon plastic panels joined by a metal backstrap. It uses a magazine release located to the rear of the trigger guard, similar to the Colt M1911.
The Beretta 92 is a 15+1-round, 9mm Parabellum, double-action, semi-automatic pistol introduced in 1975. It has an open slide design, an alloy frame and locking block barrel, originally used on Walther P38, and previously used on the M1951. The grip angle and the front sight integrated with the slide were also common to earlier Beretta pistols. What were perhaps the Model 92's two most important advanced design features had first appeared on its immediate predecessor, the 1974 .380 caliber Model 84. These improvements both involved the magazine, which featured direct feed; that is, there was no feed ramp between the magazine and the chamber (a Beretta innovation in pistols). In addition, to a 15-round "double-stacked" magazine design, it was the first Beretta design to use a magazine release located to the rear of the trigger guard, similar to the Colt M1911. The United States' military replaced the M1911A1 .45 ACP pistol in 1985 with the Beretta 92FS, designated as the M9.
The Glock 17, is a 17+1-round, 9mm Parabellum, polymer-framed, safe-action, short recoil-operated, locked-breech semi-automatic pistols designed and produced by Glock Ges.m.b.H., located in Deutsch-Wagram, Austria. It entered Austrian military and police service by 1982 after it was the top performer on an exhaustive series of reliability and safety tests. Despite initial resistance from the market to accept a perceived "plastic gun" due to unfounded durability and reliability concerns and fears that its use of a polymer frame might circumvent metal detectors in airports, Glock pistols have become the company's most profitable line of products, commanding 65% of the market share of handguns for United States law enforcement agencies, as well as supplying numerous national armed forces, security agencies, and police forces in at least 48 countries. Glocks are also popular firearms among civilians for recreational and competition shooting, home and self-defense, and concealed carry or open carry.
The FN Five-seveN, is a 20+1-round, semi-automatic pistol designed and manufactured by Fabrique Nationale d’Armes de Guerre-Herstal (FN Herstal) in Belgium. The Five-seveN pistol was introduced in 1998. It was developed in conjunction with the FN P90 personal defense weapon and the FN 5.7×28mm cartridge. Developed as a companion pistol to the P90, the Five-seveN shares many of its design features: it is a lightweight polymer-based weapon with a large magazine capacity, ambidextrous controls, low recoil, and the ability to penetrate body armor when using certain types of ammunition. The Five-seveN is currently in service with military and police forces in over 40 nations. In the United States, the Five-seveN is in use with numerous law enforcement agencies, including the U.S. Secret Service. In the years since the pistol's introduction to the civilian market in the United States, it has also become increasingly popular with civilian shooters.
A machine pistol is generally defined as a handgun capable of fully automatic or selective fire. During World War I, the Austrians introduced the world's first machine pistol the Steyr Repetierpistole M1912/P16. The Germans would quickly follow suit with machine pistols versions of the Luger P08 "Artillery Pistol" and later models of the Mauser C96. Their light weight, small size, and extremely high rates of fire, make machine pistol difficult to control in full-auto. Most machine pistols can attach a shoulder stock to improve control, like the Heckler & Koch VP70. Others, such as the Beretta 93R also have a forward hand-grip.
3D printed handgunsEdit
The Solid Concepts 1911DMLS is a 3D printed version of the M1911 pistol. It was made public around November 2013 and was printed via the direct metal laser sintering method. It was created by Solid Concepts. The Solid concepts browning M1911 replica fired more than 600 bullets without any damage to the gun. The metal printer used to create the weapon cost between $500,000 to $1,000,000 at the time the gun was created as of November 2013. The gun is made up of 34 3D-printed components.
Overview of gun laws by nationEdit
Many handguns are easily concealed — a trait that is useful both to civilians wishing to bear arms for self-defense and to criminals wishing to carry a handgun for illegal purposes. For these reasons, handguns are a particular focus of debates on gun politics, and in most jurisdictions both keeping and bearing arms are heavily regulated.
- Cary, Lucian (1961). The Colt GunBook (Fawcett Book 447)
|url=(help). Greenwich, CT, USA: Fawcett Publications. p. 3.
- Hosley, William (1999). "Guns, Gun Culture, and the Peddling of Dreams". In Robert Merrill Muth; Jan E. Dizard; Stephen P. Andrews. Guns in America: A Reader. New York: NYU Press. p. 47. ISBN 0-8147-1879-5.
- Needham, Volume 5, Part 7, 293.
- Needham 1987, p. 290.
- Chase 2003, p. 32; Needham 1987, p. 293.
- Needham 1987, p. 293.
- Needham 1987, p. 289.
- Chase 2003, p. 32.
- Lorge 2008, p. 69; Needham 1987, p. 293.
- Needham 1987, p. 289; Needham 1987, p. 330.
- Saidel, Benjamin (2000). "Matchlocks, Flintlocks, and Saltpetre: The Chronological Implications for the Use of Matchlock Muskets among Ottoman-Period Bedouin in the Southern Levant". International Journal of Historical Archaeology. 4 (3): 197. doi:10.1023/A:1009551608190.
- Fadala, Sam (17 November 2006). The Complete Blackpowder Handbook. Iola, Wisconsin: Gun Digest Books. pp. 159–161. ISBN 0-89689-390-1.
- Wilson, R. L. (1985). Colt An American Legend. Atabras. ISBN 0-89660-011-4.
- Hounshell, David A. From the American System to Mass Production, 1800–1932, Page 47
- Hogg, Ian V. (1987). Weapons of the Civil War. New York: Military. Print.
- Chicoine, David (2005). Antique Firearms Assembly/Disassembly: The Comprehensive Guide to Pistols, Rifles & Shotguns. Iola, Wisconsin: Krause Publications. pp. 171–172. ISBN 0-87349-767-8.
- Boorman, Dean K. (2002). The History of Smith & Wesson Firearms. Guilford, Conn.: Globe Pequot Press. pp. 31–33, 37. ISBN 1-58574-721-1.
- "The Gun that Won the West". Colt.
- Sapp, Rick (2007). Standard Catalog of Colt Firearms. Iola, WI: Gun Digest Books. p. 79. ISBN 978-0896895348.
- Venturino, Mike (January 2014). "Colt .45 Peacemaker". Guns Magazine.
- Kinard, Jeff (2004). Pistols: An Illustrated History of Their Impact. ABC-CLIO. p. 163. ISBN 978-1-85109-470-7.
- JL, JB,. "STUFF YOU GOTTA WATCH - Dirty Harry". thestuffyougottawatch.com. Retrieved 20 September 2018.
- Flayderman, Norm (3 December 2007). Flayderman's Guide to Antique American Firearms and Their Values. Iola, Wisconsin: Gun Digest Books. ISBN 1-4402-2651-2. 410-412
- Chapel, Charles Edward (19 September 2013). Guns of the Old West: An Illustrated Guide. Courier Dover Publications. pp. 104–106. ISBN 978-0-486-42161-2.
- Rick Sapp (2007). Standard Catalog of Colt Firearms. F+W Media, Inc. pp. 59–60. ISBN 978-0-89689-534-8.
- "Remington .41 Double Derringer". American Rifleman. March 24, 2014. Retrieved 2017-07-22.
- Marcot, Roy M. (2005). The History of Remington Firearms. Lyons Press. p. 32. ISBN 978-1-59228-690-4.
- Ramage, Ken (5 August 2008). Gun Digest 2009: The World's Greatest Gun Book. Iola, Wisconsin: F+W Media, Inc. p. 308. ISBN 0-89689-647-1.
- Ahern, Jerry (5 October 2010). Gun Digest Buyer's Guide to Concealed-Carry Handguns. Iola, Wisconsin: Gun Digest Books. pp. 130–132. ISBN 1-4402-1743-2.
- Fitzsimons, Bernard, ed. (1977). "Luger". The Illustrated Encyclopedia of Weapons and Warfare. 16. London, UK: Phoebus. p. 1778.
- Datig, Fred A., The Luger Pistol, Gun Digest, 1957 ed., Chicago Illinois: Edward Keogh Co. Inc. (1956) pp. 164–165
- "DWM Luger P-08 Pistol". chuckhawks.com. Retrieved 12 May 2017.
- Pistol, Caliber .45, Automatic, M1911 Technical Manual TM 9-1005-211-34 1964 edition. Pentagon Publishing. 1964. ISBN 978-1-60170-013-1.
- durysguns.com (2006-01-14). "Which Handgun Round Has the Best Stopping Power?". Retrieved 2006-01-14.
- Ayoob, Massad (2007). The Gun Digest Book of Combat Handgunnery. Gun Digest Books. p. 7. ISBN 978-0-89689-525-6.
- Hartink, A. E. (1996). The Complete Encyclopedia of Pistols and Revolvers. Lisse: Rebo. p. 368. ISBN 978-9-03661-510-5.
- "James Bond's Walther PPK". CIA Museum. 8 November 2007. Archived from the original on 9 January 2008. Retrieved 15 January 2015.
- "About Walther". Walther Arms. Retrieved 5 June 2014.
- Bishop, Chris (2002). The Encyclopedia of Weapons of World War II. Sterling Publishing Company, Inc. ISBN 978-1-58663-762-0.
- "Walther PP and PPK self-loading pistols (Germany)". Jane's Infantry Weapons. Janes.com. 28 February 2012. Archived from the original on 22 March 2011. Retrieved 7 November 2012.
- Arnold, David W. (2010-09-24). "Classic Handguns of the 20th Century: The Browning HI-Power". Handguns Magazine. Retrieved 2010-01-19.
- Miller, David (2001). The Illustrated Directory of 20th Century Guns. Salamander Books Ltd. ISBN 1-84065-245-4.
- Kersten, Manfred; Schmid, Walter (1999). HK- Die Offizielle Geschichte der Oberndorfer Firma Heckler & Koch [The Official History of the Oberndorf Firm Heckler & Koch] (in German). Weispfennig. ISBN 978-3000050916.
- David Higginbotham. "The HK VP70 The First Polymer Framed Pistol". Guns.com. Retrieved 2013-11-10.
HK says the VP [...] means Volks Pistole or People’s Pistol [...] This is where another (erroneous) name for the pistol comes from. Vollautomatische Pistole.
- Jack Lewis (2007). The Gun Digest Book of Assault Weapons (7th ed.). Iola, Wis.: Gun Digest Books. p. 250. ISBN 978-1-4402-2652-6.
Around 1970, Heckler & Koch developed the selective-fire VP70 (VolksPistole: People's Pistol) with the reported hope that it would be chosen to arm village militias in Vietnam.
- Trzoniec, Stanley W. (1981). Modern American Centerfire Handguns. Tulsa, Okla.: Winchester Press. p. 49. ISBN 0876913419. OCLC 7572377.
- Hartink, A. E. (2002). The Complete Encyclopedia of Pistols and Revolvers (first ed.). Edison, N.J.: Chartwell Books. p. 279. ISBN 9780785815198. OCLC 51024327.
- Kasler, Peter Alan (1992). Glock: The New Wave in Combat Handguns. Boulder, Col.: Paladin Press. 2–4 ISBN 9780873646499. OCLC 26280979.
- "GLOCK Police and Law Enforcement Firearms | Police Pistols | GLOCK USA". us.glock.com. Retrieved 2017-10-18.
- Sweeney, Patrick (2008). The Gun Digest Book of the Glock (2nd ed.). Iola, WI: Krause Publications. ISBN 0896896420.
- Glock: The Rise of America's Gun by Paul M. Barret
- "FNH USA Five-seveN Autoloading Pistol Owner's Manual". FNH USA. 2009. Retrieved August 31, 2012.
- Hogg, Ian (2002). Jane's Guns Recognition Guide. Jane's Recognition Guides. Glasgow: Jane's Information Group and Collins Press. ISBN 978-0-00-712760-3.
- Francotte, Auguste; Claude, Gaier; Robert, Karlshausen, eds. (January 2008). Ars Mechanica – The Ultimate FN Book. Vottem: Herstal Group. ISBN 978-2-87415-877-3.
- Bahde, Dave (November 2009). "FNH Five-seveN ODG 5.7×28mm". Combat Handguns. Retrieved November 28, 2009.
- Tirans, Ivars (2009). "Baltic Defence Research and Technology 2009 Conference Proceedings". Military Review: Scientific Journal for Security and Defence (ISSN 1407-1746), Nr. 3/4 (132/133), p 103.
- Wood, J.B. "FNH USA Five-seveN Pistol 5.7×28mm". Tactical Life. Retrieved October 18, 2009.
- Jones, Richard D.; Ness, Leland S., eds. (January 27, 2009). Jane's Infantry Weapons 2009/2010 (35th ed.). Coulsdon: Jane's Information Group. ISBN 978-0-7106-2869-5.
- Grevillius, Nils (September 11, 2006). "One Hot Number". Guns & Ammo, Vol. 50 (No. 10): pp 48–53.
- First metal 3D printed gun is capable of firing 50 shots, The Guardian, November 8, 2013. (archive)
- World’s First 3D Printed Metal Gun Successfully Fires 600+ Rounds, CNS News, November 13, 2013. (archive)
- 5 Different 3D Printed Gun Models Have Been Fired Since May, 2013 – Here They Are, 3D Print, September 10, 2014. (archive)
- Solid Concepts 3D-printed 1911 gets version 2.0, Guns.com, November 20, 2013. (archive)