Sam.wainer

Welcome

Hello Sam.wainer! Welcome to Wikipedia! Thank you for your contributions. If you decide that you need help, check out Getting Help below, ask me on my talk page, or place {{helpme}} on your talk page and someone will show up shortly to answer your questions. Below are some useful links to facilitate your involvement. Kuru (talk) 23:32, 8 June 2012 (UTC) Getting Started Wikipedia Tutorial • The five pillars of Wikipedia How to: edit a page • upload an image Getting Help Frequently Asked Questions Where to ask questions or make comments Request administrator attention Policies and Guidelines Neutral point of view • Reliable sources Verifiability • Citing sources • No original research What Wikipedia is not • Biographies of living persons Manual of Style • Three-revert rule • Sock puppetry Copyrights • Fair use • Image use policy External links • Spam • Vandalism Deletion policy • Conflict of interest • Notability The Community Build consensus • Resolving disputes Assume good faith • Civility • Etiquette No personal attacks • No legal threats Community Portal • Village pump Signpost • IRC channels • Mailing lists Things to do Be bold in editing • Help develop an article Pages needing attention • Peer review Join a WikiProject • Translating articles Cleaning up: General • Spam • Vandalism Miscellaneous Useful templates • Categories • Stubs User pages • Talk pages Tools • User scripts

Welcome to Wikipedia: check out the Teahouse!

Hello! Sam.wainer, you are invited to the Teahouse, a forum on Wikipedia for new editors to ask questions about editing Wikipedia, and get support from peers and experienced editors. Please join us! Sarah (talk) 05:35, 9 June 2012 (UTC)

Your submission at Articles for creation

Photosensitive Anodized Aluminum, which you submitted to Articles for creation, has been created.
The article has been assessed as Start-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. Note that because you are a logged-in user, you can create articles yourself, and don't have to post a request. However, you are more than welcome to continue submitting work to Articles for Creation.

• If you have any questions, you are welcome to ask at the help desk.
• If you would like to help us improve this process, please consider .

Thank you for helping improve Wikipedia!

Calmer Waters 22:14, 18 June 2012 (UTC)

Speedy deletion nomination of File:Type 1 photoanodized aluminum cross section.jpg

A tag has been placed on File:Type 1 photoanodized aluminum cross section.jpg requesting that it be speedily deleted from Wikipedia. This has been done under section F1 of the criteria for speedy deletion, because the image is an unused redundant copy (all pixels the same or scaled down) of an image in the same file format, which is on Wikipedia (not on Commons), and all inward links have been updated.

If you think that the page was nominated in error, contest the nomination by clicking on the button labelled "Click here to contest this speedy deletion" in the speedy deletion tag. Doing so will take you to the talk page where you can explain why you believe the page should not be deleted. You can also visit the page's talk page directly to give your reasons, but be aware that once a page is tagged for speedy deletion, it may be removed without delay. Please do not remove the speedy deletion tag yourself, but do not hesitate to add information that is consistent with Wikipedia's policies and guidelines. If the page is deleted, you can contact one of these administrators to request that the administrator userfy the page or email a copy to you. Stefan2 (talk) 19:42, 13 August 2012 (UTC)

Help template

Hello, Sam.wainer! You placed the template above but didn't ask a question. What do you need help with? Rotideypoc41352 (talk) 14:30, 26 October 2017 (UTC)

thanks, Rotideypoc41352 i'm trying to get this new article about MIL-DTL-15024 published; i've published a little a while back, but i can't remember how to get the article into tehe review process — Preceding unsigned comment added by 96.11.124.194 (talk) 15:28, 26 October 2017 (UTC)

What you can do is copy and paste the article you were working on below into the article wizard, and a draft can be created that way that you can submit to be reviewed. RickinBaltimore (talk) 16:24, 26 October 2017 (UTC)

MIL-DTL-15024

MIL-DTL-15024 is a military specification established by the United States Department of Defense to define the physical characteristics of plates, tags and bands used for identification of equipment. First established in 1952 as MS15024A (cancelled), MIL-DTL-15024 is currently in its seventh revision as MIL-DTL-15024F.

MIL-DTL-15024 is maintained by the Naval Air Warfare Center Aircraft Division and used by all branches of the U.S. military and their suppliers to define labeling standards for new and repair equipment. An eight revision (G) is currently under review for publication by NAVAIR. MIL-DTL-15024 guides the marking of equipment and components for ships, submarines, aircraft, vehicles, weapons systems, communication systems and other military support equipment. MIL-DTL-15024 references 19 specifications and is referenced by 425 other military and commercial specifications. The most recent copy of MIL-DTL-15024 can be obtained via the Defense Standardization Program’s ASSIST portal.

MIL-DTL-15024 has six sections: 1. SCOPE, 2. APPLICABLE DOCUMENTS, 3. REQUIREMENTS, 4. VERIFICATION, 5. PACKAGING and 6. NOTES. The requirements section defines characteristics of marking options including plate size/thickness, color/contrast, character spacing, materials and marking methods. The verification section lists performance requirements and the applicable tests that verify performance characteristics for each marking type.

Classifications of Label Plates

MIL-DTL-15024 defines 10 material classifications for label plates, nameplates, data plates, signs, tags, labels or bands. The 10 classifications are listed below and are differentiated based upon material and imaging process.

• Type A Chemically etched or chemically engraved plate
• Type B Mechanically engraved plate
• Type C Stamped plate
• Type D Cast plate
• Type E Screen printed, sublimation or digitally printed plate
• Type F Laminated plate
• Type G Foils and decals
• Type H Photosensitive plate
• Type J Tag
• Type L Laser generated plate

Proposed Changes (Revision G)

The proposed revision of MIL-DTL-15024 (revision G) updates document language and furthers the definition of Type L laser generated plates. Revision G, table IV, has updated test procedures for meeting the requirements of each classification type, including updated definitions and use guidance for Type L – Laser Generated Plates. The significance of this inclusion is that laser engraved materials are becoming increasingly utilized for commercial and defense marking applications. A proposed product added to MIL-DTL-15024 in revision G is coated steel for lasers which provides an option to replace the cumbersome practice of deep engraving and paint filling steel that has been common for defense applications.

Starting in revision G, the Navy has expanded its definition of the products and performance requirements for Type L laser generated materials as follows:

• Class 1 - laser markable black anodized aluminum impregnated with silver compounds (commercial name: BlackPlus®)
• Class 2 - laser markable black (or red) aluminum sheet coated with a weatherable, abrasion-resistant coating (commercial name: DuraBlack® and DuraRed®)
• Class 3 - laser engraved plastic, two-ply phenolic (generic, no commercial name)
• Class 4 - laser markable (bonded) stainless steel pre-coated with ceramic compound (commercial name: LaserBond®)

The purpose of this change is to ensure that when the DoD and its suppliers choose to use Type L materials, they pick the correct material for the application environment based upon both durability, label plate size/thickness, image characteristics and lead time/quantity requirements. More information on classes 1,2,3, and 4 of MIL-DTL-15024 Type L can be found on www.mildtl15024.com.

The other main proposed change is to update Table IV to include different test conditions for metallic vs. non metallic versions of types A-L when applicable whereas metallic substrates often are able to survive more rigorous conditions for tests of temperature, weather, abrasion and fluid resistance.

History

Revision	Document Number	Year Issued	Types & Descriptions
Orig	MIL-I-15024	1952	Type A – etched Type B – engraved Type C - stamped Type D – cast Type E – stenciled Type F – graphic Type G – decalcomanias Type H – photographic
A	missing in I.H.S.	1955	n/a
B	MIL-P-15024B	1956	Type A – etched Type B – engraved Type C - stamped Type D – cast Type E – stenciled Type F – **laminated Type G – decalcomanias **or adhesive backed metal foil Type H – photographic Type I - embossed
C	MIL-P-15024C	1968	Type A – etched Type B – engraved Type C - stamped Type D – cast Type E – stenciled Type F – laminated Type G – adhesive backed metal foil (decalcomanias deleted by this Rev) Type H – photosensitive Type I - Debossed Type J - Identification tag
D	MIL-P-15024D	1971	Type A – etched **or chemically engraved Type B – engraved Type C - stamped Type D – cast Type E – screen or litho print Type F – **laminated plastic Type G – adhesive backed metal foil Type H – photosensitive aluminum (other than foil) deleted Type I - Debossed Type J - tag Type K1 - cable band (plastic) Type K2 - cable band (heat shrinkable tubing)
E	MIL-P-15024E	1993	Plates: Type A – etched or chemically engraved Type B – engraved Type C - stamped Type D – cast Type E – screen or litho print Type F – laminated plastic Type G – adhesive backed metal foil Type H – photosensitive aluminum (other than foil) Type L - laser generated plate Other: Type J - tag Type K1 - cable band (plastic) Type K2 - cable band (heat shrinkable tubing)
F	MIL-DTL-15024F	n/a	Type A Etched or chemically engraved plate Type B Engraved plate Type C Stamped plate Type D Cast plate Type E Screen or litho print plate Type F Laminated plate Type G Adhesive-backed plate Type H Photosensitive plate (deleted "alum" & "other than foil") Type J Tag Type K1 Cable Band (deleted "plastic") Type K2 Cable Band (heat shrinkable) Type L Laser generated plate
G draft of proposed change	MIL-DTL-15024G	2018E	Type A Chemically etched or chemically engraved plate Type B Mechanically engraved plate Type C Stamped plate Type D Cast plate Type E Screen or litho print plate Type F Laminated plate Type G Foils and decals Type H Photosensitive plate Type J Tag Type K1 Cable Band & Type K2 Cable Band (Heat shrinkable) Type L1 Laser generated plate

sam.wainer (talk) 20:47, 25 October 2017 (UTC)

Your submission at Articles for creation: MIL-DTL-15024 (December 12)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by SwisterTwister was:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:MIL-DTL-15024 and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:MIL-DTL-15024, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and save.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

SwisterTwister talk 06:06, 12 December 2017 (UTC)

MfD nomination of Draft:MIL-DTL-15024

Draft:MIL-DTL-15024, a page which you created or substantially contributed to, has been nominated for deletion. Your opinions on the matter are welcome; you may participate in the discussion by adding your comments at Wikipedia:Miscellany for deletion/Draft:MIL-DTL-15024 and please be sure to sign your comments with four tildes (~~~~). You are free to edit the content of Draft:MIL-DTL-15024 during the discussion but should not remove the miscellany for deletion template from the top of the page; such a removal will not end the deletion discussion. Thank you. Kees08 (Talk) 06:21, 15 January 2018 (UTC)

Your submission at Articles for creation: MIL-DTL-15024 (January 21)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by MadeYourReadThis was:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:MIL-DTL-15024 and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:MIL-DTL-15024, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and save.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

MadeYourReadThis (talk) 13:24, 21 January 2018 (UTC)