Mauser, begun as Königliche Waffen Schmieden, is a German arms manufacturer. Their line of bolt-action rifles and semi-automatic pistols have been produced since the 1870s for the German armed forces. In the late 19th and early 20th centuries, Mauser designs were also exported and licensed to a large number of countries which adopted them as military and civilian sporting firearms. The Mauser Model 98 in particular was widely adopted and copied, and is the foundation of many of today's sporting bolt action rifles.
|Predecessor||Königlich Württembergische Gewehrfabrik|
|Successor||Mauser Jagdwaffen GmbH|
|Founded||31 July 1811|
|Founders||Wilhelm & Paul Mauser|
|Owner||Lüke & Ortmeier Gruppe|
Founded as Königliche Waffen Schmieden on 31 July 1811 by Frederick I. Originally located partly at Ludwigsburg and partly in Christophsthal, the factory was transferred to Oberndorf in the former Augustine Cloister. Andreas Mauser was the master gunsmith there. Of his seven sons who worked with him there Peter Paul Mauser showed an outstanding ability to develop methods of operation that were faster and more efficient. His older brother Wilhelm assumed many of his father's duties as he became ill.
Peter Paul Mauser, often referred to as Paul Mauser, was born on 27 June 1838, in Oberndorf am Neckar, Württemberg. His brother Wilhelm was four years older. A brother, Franz Mauser, went to America in 1853 with his sister and worked at E. Remington & Sons.
Peter Paul was conscripted in 1859 as an artilleryman at the Ludwigsburg arsenal, where he worked as a gunsmith. By December 1859 he had so impressed his superiors that he was placed on inactive military service and assigned to the royal factory at Oberndorf. Paul engaged his older brother Wilhelm in working on a new gun system in their spare time after work. Paul was the engineer and designer but Wilhelm took on the task of manager for their interests with the Oberndorf factory.
Paul's first invention was a cannon and its ammunition. His ability to produce both the gun and the ammunition for it was followed during his entire career and made him unique in this ability. Following the success of the Dreyse needle gun (Zündnadelgewehr) Paul turned his energies to improving on that design and producing a new one. Paul and Wilhelm had separated due to differences during this time. After Paul developed a new turning bolt design Wilhelm was impressed enough to rejoin the business and succeeded in obtaining the financing to purchase machinery and continue development. While the original needle gun used a pin that pierced the base of the cartridge to ignite the primer in the middle, Mauser soon developed a needle that ignited the charge at the base, a superior design.
Locally the Dreyse Needle gun had just been adopted so the brother turned to the Austrian Ambassador to try to sell their gun. He forwarded their new gun to Vienna for testing. It was here that American Norris of the Remington company saw the new Mauser rifle design. In 1867 Norris hired the Mauser brother to go to Luttich to work on a new design. He also stipulated that patents were to be taken out in his name and that a royalty would be paid to the Mauser brothers for rifles sold. Norris was convinced that he could sell the design to the French to convert their Chassepot rifles. The Norris-Mauser patent was taken out in the United States. Remington was outraged at the behavior of Norris and never made an effort to sell the new rifle.
Based on the Dreyse needle gun, he developed a rifle with a turn-bolt mechanism that cocked the gun as it was manipulated by the user. The rifle initially used a firing needle; a later version used a firing pin and a rear-ignition cartridge. The rifle was shown to the Austrian War Ministry by Samuel Norris of E. Remington & Sons. Norris believed the design could be adapted to convert Chassepot needle guns to fire metallic cartridges. Shortly thereafter, a partnership was formed in Oberndorf between Norris and the Mauser brothers. The partners went to Liège in 1867, but when the French government showed no interest in a Chassepot conversion, the partnership was dissolved. Paul Mauser returned to Oberndorf in December 1869, and Wilhelm arrived in April 1870. Before leaving Luttich, the Mausers insisted that he submit the rifle to Royal Prussian School of Riflemanship. The results were impressive and Wilhelm was invited to the arsenal at Spandau.
Peter Paul and Wilhelm Mauser continued development of their new rifle in Paul's father-in-law's home. The Mauser rifle was accepted by the Prussian government on 2 December 1871, and was accepted for service until 14 February 1872, after a requested design change to the safety lock. The Mauser brothers received an order for 3,000 rifle sights, but actual production of the rifle was given to government arsenals and large firms. The sights were produced at the Xaver Jauch house starting 1 May 1872. After an order for 100,000 rifle sights was received from the Bavarian Rifle Factory at Amberg, the Mauser brothers began negotiations to purchase the Württemberg Royal Armoury. A delay in the purchase forced them to buy real estate overlooking the Neckar River Valley, where the upper works was built that same year. A house in Oberndorf was also rented to fulfill the Bavarian order.
Acquisition of the Königlich Württembergische GewehrfabrikEdit
The Königlich Württembergische Gewehrfabrik was acquired on May 23, 1874, after an agreement between the Württemberg government and the Mausers to produce 100,000 Model 71 rifles. The partnership of Mauser Brothers and Company was formed between the Württemberg Vereinsbank of Stuttgart and Paul and Wilhelm Mauser on February 5, 1874. By 23 May 1874, the Mauser partnership had three factories in Oberndorf.
Wilhelm Mauser suffered from health problems throughout his life, which were aggravated by his frequent business travels. A combination of these led to his death on 13 January 1882. The partnership became a stock company with the name of Waffenfabrik Mauser on 1 April 1884. The shares held by the Württemberg Vereinsbank and Paul Mauser were sold to Ludwig Löwe & Company on 28 December 1887, and Paul Mauser stayed as the technical leader. Ludwig Löwe & Company was fifty per cent owner of Fabrique Nationale d'Armes de Guerre, a company formed in 1889 to manufacture Mauser rifles for the Belgian government. Deutsche Waffen und Munitionsfabriken A.G. (DWM) was formed on 7 November 1896, as a merger of Ludwig Löwe & Company A.G., Deutsche Metallpatronenfabrik A.G., Rheinisch-Westfälischen Powder Company, and Rottweil-Hamburg Powder Company. Mauser A.G. was formed on 23 April 1897. After World War II, DWM was renamed Industrie-Werke Karlsruhe A.G. (IWK).
Mausers were readily adapted as hunting rifles; in Africa, safari rifles were often made from Mausers. These rifles were often rechambered in larger rounds up to and including .50 caliber (12.7 mm). The adaptations usually consisted of shortening the foregrip and barrel, rechambering to accommodate popular British rounds, and minor alterations to the action. In the late 19th century and early 20th century, companies that made alterations were generally Commonwealth-based. Several proprietary big game rounds were specifically for hunting large and dangerous game. Today, large and small bore Mauser-derived rifles are made all over the world for the civilian market and are popular with hunters.
Surplus military Mausers, many in mint condition, have also entered the civilian market, to be purchased by collectors and gun owners. A considerable number of surplus Karabiner 98ks were available after World War II, and some were used by Schultz & Larsen in Denmark as the basis for target rifles. Some of these are still in competitive use, although with the benefit of new barrels.
The strong following enjoyed by surplus military Mausers is partly a testament to their reliability and quality of manufacture. Additionally, the comparative low cost of surplus military ammunition has served to continue their use by shooting enthusiasts, however, in recent years it is becoming more difficult to obtain as stocks dry up. That being said, vintage surplus ammunition usually requires specialized cleaning regimens to prevent aggressive and rapid metal oxidation caused by corrosive salts (moisture attracting) contained in their priming compounds. Care must be taken to thoroughly and promptly clean and neutralize these salts after firing corrosive ammunition, lest the weapon suffer metal and mechanical damage.
The first Western-made handguns introduced into South Asia were made by the Mauser company, and the term has entered the lexicon in India and the surrounding regions, to mean any heavy pistol.
- John Rigby & Company developed four distinct rounds for its Mauser safari big-game rifles (.275 Rigby, .350 Rigby, .416 Rigby, and the .450 Rigby).
- Česká Zbrojovka manufactures various Mauser 98 variants, the most notable being the CZ 550 Safari Magnum, the .375 H&H Magnum, and the .458 Lott.
- SIG Sauer makes a Mauser M98 rifle chambered in several medium and magnum chamberings and a M98 Safari rifle, chambered in .416 Rigby, .450 Dakota, .458 Lott, and .500 Jeffery.
- Zastava Arms manufactures several 98 Mauser variants, the best known of these being the LK M70 and M85 series, in various popular calibers ranging from .22-250 to .458 Winchester Magnum. A number of the LK M70 slightly modified versions have been widely sold in other countries.
- Carl Gustav Sweden national armory took over the manufacturing of the M94/96 and the famous target rifles CG63 and CG68.
- Husqvarna Vapenfabrik made M94-96, variant M38, M38-96, and many other civilian variations; Model 46 (46A,46B, and 46AN) in cal. 6.5×55mm, 9×57mm and 9.3×62mm; Model 640 (646 – 6.5×55, 648 – 8×57IS, 649 – 9.3×62) without the thumb notch. They used FN action for later models 640 and 140 series. The cross-over model 1640 Improved Mauser (over the M96) is a cross between the M98 and M96. They also produced the 1900 actions.
- Fabrique Nationale de Herstal made a M98 series, the early production being small ring and later large ring of "C" (early) and "H" (late) design. The FN actions were also used by Sako of Finland as their Hi-Power rifles, by Browning on the early Medallions, as Husqvarna small ring model 146 and large ring late model 640, and by Kodiak Arms, Connecticut. Many other arms manufacturers used the FN action.
Mauser firearms pre-1945Edit
Mauser-Norris Model 67/69 rifleEdit
Between 1867 and 1869, the Mauser brothers and Samuel Norris developed a single-shot bolt-action rifle. The caliber and number produced are not known. Ludwig Olson wrote that an example had at one time been on display at the Smithsonian Institution in Washington, D.C. The rifle was patented in Austria by Samuel Norris on 24 December 1867. The bolt head did not rotate, a feature chosen by Paul Mauser to "protect the heads of paper cartridges from friction and possible damage while locking the bolt, and to provide a non-rotary seat for the extractor when metallic cartridges were used."
An improved version of the rifle used a coil spring wrapped around the firing pin and a safety and a cocking piece attached to the rear of the firing pin. This rifle was shown to the Prussian government, and after some design changes to the safety, was accepted for service as the Infantry Rifle Model 71 on 14 February 1872. Often considered a close relative of the Chassepot rifle, and borrowing Dreyse's turning-bolt action lock, still the most innovative features of the new weapon were the work of Peter Paul Mauser.
Model 1871 and derivativesEdit
The Mauser Model 1871 was the Mauser brothers' first rifle. It was adopted by the German Empire (except for the Kingdom of Bavaria) as the Gewehr 71 or Infanterie-Gewehr 71 (I.G.Mod.71 was engraved on the rifles). Production began at the Oberndorf factory for the infantry version, which fired a black powder 11×60mm round from a long 850 mm (33 in) barrel. Shorter versions were introduced with the 700 mm (28 in) barreled Jäger and 500 mm (20 in) cavalry carbine.
Slightly modified versions were widely sold to other countries, firing bullets that would today be considered very large, typically 9.5mm to 11.5mm. Such large bullets were necessary due to the limitations of black powder, which hindered velocities. Serbia designed an improved version of the Model 71 in 10.15mm, made in Germany and called the Mauser-Milovanović M1878/80. In 1884 an 8-shot tubular magazine was added by Mauser to the Model 71/84. The Turkish model 1887 rifle was the first of a series of rifles produced for the Turkish Army. Its design echoed that of the German Gewehr 71/84 service rifle: a bolt-action weapon with a tubular magazine beneath the barrel. The Turkish contract specified that if any other nation ordered Mauser rifles with more advanced technology, that design would be substituted for the Model 1887 to fill the remainder of the Turkish order. This clause was utilized after Belgium adopted the Model 1889 rifle.
8×57mm I and IS cartridgesEdit
In 1886 the French Army introduced the Lebel Model 1886 rifle, which used a smokeless powder cartridge. Smokeless powder allowed smaller diameter bullets to be propelled at higher velocities, with accuracy to 1,000 yards (910 m), making most other military rifles obsolete. Like the Mauser 71/84, its disadvantage was a slow-to-load eight-round tube magazine.
The German Army adopted the best features of the Lebel for the Gewehr 88, also known as the "Model 1888 commission rifle", along with a modified Mauser action and a Mannlicher-style box magazine. The Karabiner 88 was the carbine version. Both would be updated in the early 20th century and saw limited use in World War I. The Gewehr 88 was not actually a Mauser designed and engineered rifle.
The Gewehr 88 was built for the new 8×57mm I with a 0.318-inch bullet. The I and IS designations are used to differentiate the two bullets used with the same basic cartridge. The actual diameter of the 8.1mm is 0.318898 inches. Commonly known today as the "8 mm Mauser I", it was used for later Mauser rifle models. This was not a Mauser designed and engineered cartridge. The 8×57mm I incorporated the advantages of smokeless powder and higher velocity found in the Lebel. It was rimless, which allowed smoother feeding for both rifles and machine guns. The original bullet had a round nose and was relatively heavy by modern standards but was typical of early smokeless powder small bore military designs. Several redesigns, including the adoption of the spitzer bullet of 153 grains weight (later 198 grains weight), led to a change in the rifling groove depth from .10mm to .15mm to solve problems brought about by the greater velocity and the 8×57mm IS or 8×57mm JS 8.2mm or 0.323-inch bullet. This bullet, with a sharp point (and later in the 1930s a boat tail), brought the cartridge to its eventual potency. Only later .323 caliber versions of Gewehr 98 or converted Gewehr 88 and Gewehr 98 rifles could safely fire the larger 8×57mm JS rounds.
The Mauser 8×57mm IS or ISR (8.2mm or 0.323-inch) cartridge cannot safely be fired out of a rifle designed for 8×57mm I (8.1mm or 0.318-inch). The increased pressure from the larger cartridge may cause a catastrophic failure of the firearm. A qualified gunsmith can verify the correct chambering by slugging the barrel. The mark and caliber applied by the proofing house may also be utilized to properly identify the correct caliber of the rifle.
The R included in this style of designations indicates a cartridge with a rim, which functions better in some types of rifles, especially drillings and other types of combination guns. These often have slightly lower power to match the weaker actions present in some of these rifles. Many such guns continued to use the smaller 0.318 diameter bullet until this practice was outlawed by Hermann Göring in the early 1940s in his role as chief huntsman of the Third Reich. Particular care is often taken to determine the actual caliber of such guns before firing them.
Models 1889/90/91 and Experimental Model 92Edit
After the Mauser brothers finished work on the Model 71/84 in 1880, the design team set out to create a small caliber repeater that used smokeless powder. Because of setbacks brought on by Wilhelm Mauser's death, they failed to have the design completed by 1882, and the German Rifle Test Commission (Gewehr-Prüfungskommission) was formed. The commission preferred to create their own design. Paul Mauser created two different variations of the same rifle, one with a stock strengthened with a barrel shroud and a traditional design following the layout of the 71 series in hope he might be able to overturn the commission's decision, or at least sell his design to the Kingdom of Bavaria, which adopted its own arms. The two rifles became known as the 89 Belgian (with a barrel shroud) and the 91 Argentine (with a 71 layout) Mausers, identical in their function and feed system. The main features were the ability to use stripper clips to feed the magazine (a revolution in rate of fire), and its rimless 7.65×53mm Argentine ammunition, advanced for the time.
The system proved impressive at the 1884 Bavarian Arms Trials. Both firearms were a success, but decision-makers were not convinced that the stripper feed was superior to the en-bloc system employed by Mannlicher. In response, Mauser started small-scale production of the design in an effort to interest foreign nations, but failed to convince any of the European major powers.
The Belgian attache, however, urged his government to contact Mauser, hoping the design might give them a chance to found a domestic arms industry. The heavy-barreled Mauser with the barrel shroud resulted in the founding of arms manufacturer FN Herstal. FN could not keep up with orders, so they outsourced production to the Birmingham Small Arms Company in England.
The Belgians' talks with Mauser prompted the Ottoman Empire to consider the design. In the end they ordered their own simpler variation of the 91 Argentine Mauser known as the 90 Turkish. While this was taking place, the Argentine Small Arms Commission contacted Mauser in 1886 to replace their Model 71s; since they wished to keep retraining of their armed forces to a minimum, they went for the Mauser 91. As with other early Mausers, most such arms were made by the Ludwig Loewe company, who in 1896 joined with other manufactures to form Deutsche Waffen und Munitionsfabriken.
All variations used the same 7.65 mm round-nosed cartridge. Many parts were interchangeable, with the exception of the bayonets of the 89 and 90/91; the barrel shroud made the bayonet ring too wide. The 89 Mauser rejected by Germany in 1884 entered service in 1940 with the second-line units of Norway, Denmark, the Netherlands, and Belgium.
A non-rotating Mauser claw extractor was introduced in the Model 92. Several variations of this model participated in rifle trials for the U.S. Army of that year; the Norwegian Krag–Jørgensen rifle was ultimately chosen.
The Mauser Model 1893 is a bolt-action rifle commonly referred to as the "Spanish Mauser", though the model was adopted by other countries in other calibers, most notably the Ottoman Empire. The M93 introduced a short staggered-column box magazine as standard, holding five smokeless 7×57mm Mauser rounds flush with the bottom of the rifle, which could be reloaded quickly by pushing a strip of rounds from the top of the open bolt. It still had only two locking lugs.
Swedish M1894 rifleEdit
The armies of Brazil and Sweden were issued the Model 94. The similar Model 1895 was sold to Mexico, Chile, Uruguay, China, Persia, and the South African states of Transvaal and the Orange Free State (Boers). A safety feature offered by the Model 1895 was a low shoulder at the rear of the receiver, just behind the base of the bolt handle, which would contain the bolt in the unlikely event that the front locking lugs sheared off due to excessive pressure. South African Mausers were highly effective against the British during the Second Boer War; these proved deadly at long ranges, prompting the British to design their own Mauser-inspired high-velocity cartridge and rifle. These rare Mauser carbines and rifles—especially the Model 1895—can be easily identified by the letters "OVS" (Oranje-Vrijstaat [Dutch for "Orange Free State"]) either marked on the weapons' receiver ring and the stock directly below, or otherwise carved into the right side of the buttstock. The British Pattern 1914 Enfield with a Mauser-style lug might have replaced the Lee–Enfield, but the exigencies of World War I prevented this from happening. The Lee–Enfield continued to see service until it was replaced by a semi-automatic weapon after World War II. The Germans had faced the U.S. M1917 rifle during World War I, which was the Pattern 14 rifle adapted to fire the U.S. .30-06 cartridge of the American M1903 Springfield rifle.
Chilean Mauser Model 1895Edit
The Mauser Model 1895 adopted as Fusil Mauser Chileno Mo 1895. by Chilean forces, is a bolt operated magazine fed rifle using the 7×57mm Mauser cartridge. It is the first major modification of the Mauser Model 1893 and was produced by Deutsche Waffen und Munitionsfabriken, known as DWM, and Ludwig Loewe Company during the period of 1895–1900
On 3 November 1893, the United Kingdoms of Sweden and Norway adopted the 6.5×55 mm cartridge. As a result, the Swedes chambered their new service weapons, the m/94 carbine and m/96 rifle, in this round. The rifle action was manufactured relatively unchanged from 1896 to 1944, and the m/94 Carbine, m/96 Rifle, m/38 Short Rifle, and m/41 Sharpshooter models are known by collectors as "Swedish Mausers". They are still sought after by military service rifle shooters and hunters. Initial production of the weapons was in Germany by Waffenfabrik Mauser, with the remainder being manufactured under license by Sweden's state-operated Bofors Carl Gustaf factory. The m/38 short rifle was produced by Husqvarna; additional m/38s were converted from Model 96 rifles.
"Swedish steel" is a term for the steel used by the German Mauser, and later by Swedish manufacturing facilities, to make the m/96 rifles. Swedish iron ore contains the proper percentages of trace elements to make good alloy steel. Thus, though lacking the industrial base necessary for mass-producing steel and iron, the Swedish steel industry developed a niche market for specialty high-strength steel alloys containing nickel, copper, and vanadium. Swedish steels were noted for their strength and corrosion resistance and were especially suited for use in toolmaking, cutlery, and firearms. When Mauser was contracted to fabricate the initial production runs of Swedish Mausers in Germany due to production delays, Sweden required the use of Swedish steel in the manufacturing process. The Swedish Ordnance Office continued to specify the same Swedish steel alloy in Swedish-made Mausers until the last new-production m/38 barrelled actions were completed in 1944.
In 1898 the German Army purchased a Mauser design, the Model 98, which incorporated improvements introduced in earlier models. The weapon was originally chambered for the M/88 iteration of the 7.92×57mm Mauser and officially entered German service as the Gew. 98 on April 5, 1898. This remains by far the most successful of the Mauser designs, helped by the onset of two world wars that demanded vast numbers of rifles.
Noticeable changes from previous Mauser rifle models included better ruptured case gas venting, better receiver metallurgy, and a larger 35.8 mm (1.41 in) diameter receiver ring compared to previous Mauser "small ring" bolt action designs that had 33 mm (1.30 in) diameter receiver rings for additional strength and safety. Mauser incorporated a third "safety" lug on the bolt body to protect the shooter in the event that one or more of the forward locking lugs failed. In 1903 the 7.92×57mm Mauser S Patrone "spitzer" (pointed) round was introduced. This was in response to the French adoption of a pointed and boat-tail bullet, which offered better ballistic performance. The bullet diameter was increased from 8.08 mm (0.318 in) to 8.2 mm (0.323 in). This improved cartridge copied the pointed tip design instead of the previous rounded nose profile. Pointed rounds give bullets a better ballistic coefficient, improving the effective range of the cartridge by decreasing aerodynamic drag.
Most existing Model 98s and many Model 88s were modified to take the new round, designated "7,9mm" or "S Patrone" by the German military. Modified Model 88s can be identified by an "S" on the receiver. Due to the possibility for overpressure from the undersize barrel, the spitzer round cannot safely be used in unmodified guns, particularly with Model 88 rifles.
Paul Mauser died on 29 May 1914, before the start of World War I that August. The war caused a spike in demand for the company's rifles. The 98 carbines were sold, as well as an experimental version with a twenty-round, rather than five round, box magazine. The extended magazine was not well received, however.
A number of carbine versions known as Karabiner 98s were introduced and used in World War I. Some of these were even shorter than the later K.98k. These carbines were originally only distributed to cavalry troops, but later in the war to the special storm troop units as well.
- M1902, M1912, M1924 & M1936 Mexican in 7×57mm
- M1903 Turkish in 7.65x53mm
- M1904 & M1912 Chilean in 7×57mm
- M1912 Colombian in 7×57mm
- M1904 Portuguese in 6.5×58mm Vergueiro
- M1906 Swedish in 6.5×55mm
- M1908 Brazilian in 7x57mm
- M1908 Uruguayan in 7x57mm produced by the Deutsche Waffen und Munitionsfabriken
- M1909 Argentine in 7.65×53mm
- M1910 Serbian in 7×57mm
- M1924 Chinese in 7.92×57mm
- Belgian Mauser Model 1935
- M1943 Spanish short (not to be confused with the M93 Spanish Mauser) in 7.92×57mm manufactured in the Spanish arsenals. Will have "La Coruna" or the Spanish Air Force Eagle stamped on the top of the receiver. Virtually identical to the K98k.
- vz. 98/22 Often made from G98 parts, rebuilt in the BRNO factory in Czechoslovakia.
The Mauser 1918 T-Gewehr was the world's first anti-tank rifle—the first rifle designed for the sole purpose of destroying armored targets. The weapon, essentially an enlarged G98, fired 13×92mm (.525-caliber) TuF (Tank und Flieger, "tanks and aeroplanes") semi-rimmed cartridges. In May 1918, the Mauser Company began mass-producing the Mauser 13mm Tank Abwehr Gewehr Mod. 18 in Oberndorf am Neckar.
Following the collapse of the German Empire after World War I, many countries that were using Mauser models chose to develop, assemble, or modify their own G98-action rifle designs. The most prolific of them were the Czechoslovak M1922 CZ 98 and M1924 CZ vz.24 and the Belgian Fabrique Nationale M1924 and M1930, all in 8×57mm.
The Belgians and Czechs produced and widely exported their "Mausers" in various calibers throughout the 1920s and 1930s, before their production facilities were absorbed by Nazi Germany to make parts or whole rifles for the German Army. Strictly speaking, these were not "Mauser" rifles, as they were not engineered or produced by the German company.
To take advantage of the widespread and popular German single-shot 8.15×46mmR cartridge for use in a military firearm, a modified Gewehr 98 referred to as a "Wehrmannsgewehr" was designed. These were made primarily as single shots; some only had a wood block in the magazine space. These became the 1936 Olympic team rifles for the Germans.
An 8.15×46R Mauser Wehrmannsgewehr
As the restrictions on production were increasingly ignored by the Germans in the 1930s, a new Mauser, the Mauser standard model, was developed from the rifle-length Karabiner 98b. It was nominally intended for export and civilian sales. While many standard model rifles were indeed exported, it was meant primarily for use by the revived German military. It rapidly evolved into the Karabiner 98 Kurz, which was adopted by Nazi Germany as the standard infantry rifle in 1935 and saw service until the end of World War II.
Type A, Model B, Model K, Armee-Model C, Africa ModelEdit
A series of very successful hunting rifles were developed in the first decades of the 20th century. The Special Rifle Type A was the top-of-the-line sporting rifle of the early 20th century. The Model B (B for Büchse) and Model K were sport rifles offered in many configurations. The Model C, made from 1903 to 1930, was a cheap rifle made to accommodate a range of cartridges for hunting. The Mauser Africa Model, introduced around 1904 or 1905, was used mainly by settlers in Africa.
Model M and model SEdit
The Model M was introduced in 1914. A Model S (S for stutzen or short) was also offered.
The Mauser M1916, or Mauser selbstlade-karabiner (self-loading carbine), was a semi-automatic rifle that used a delayed blowback mechanism and fed from 25-round detachable magazine. The process of developing a semi-automatic rifle cost Paul Mauser an eye when a prototype suffered an out-of-battery detonation. The mechanism was quite delicate, working reliably only when completely clean, which made the rifle unsuitable for infantry use. However, the Imperial German Flying Corps adopted the rifle for its aircraft crews in 1915, and more generally in 1916. Aerial combat provided the clean environment the rifle required and its semi-automatic capability was an advancement over bolt-action rifles.
However, the rifle had another flaw; it was expensive to make. The air service turned to the Swiss-produced Mondragón rifle, which was tested by the army and though less accurate than Mauser's design, the rifle was approximately three times cheaper. The widespread adoption of machine guns then made all self-loading rifles obsolete in the air service.
Mauser 1925 Special range rifleEdit
The 1925 Special range rifle was a commercial product introduced in 1925 and sold in the United States. It was intended for high accuracy range shooting. The company also produced a .22 caliber training rifle during this time frame.
The Karabiner 98k "Mauser" (often abbreviated "K98k" or "Kar98k"), adopted in the mid- 1930s, became the most common infantry rifle in service in the German Army during World War II. The design was developed from the Karabiner 98b, one of the carbines developed from the Model 1898. The K98k was first adopted by the Wehrmacht in 1935 as their standard issue rifle, with many older versions being converted and shortened.
Mauser KKW cadet rifleEdit
The Mauser KKW cadet rifle is a single shot, .22 caliber rifle that was introduced in 1938. It is virtually identical to the Karabiner 98k. These cadet rifles were used by all German military, paramilitary and police organizations, especially the Hitler Youth.
The Gewehr 41 rifles, commonly known as the "G41(W)" or "G41(M)", were semi-automatic rifles used by Nazi Germany during World War II. By 1940 the Wehrmacht issued a specification to various manufacturers, and Mauser and Walther submitted prototypes that were very similar. Both Gewehr 41 models used a mechanism known as the "Bang" system (named after the designer of the M1922 Bang rifle). In this system, gases from the bullet were trapped near the muzzle in a ring-shaped cone, which in turn pulled on a long piston rod that opened the breech and re-loaded the gun. Both models also included inbuilt 10-round magazines that were loaded using two of the stripper clips from the Karabiner 98k, utilizing 7.92×57mm Mauser rounds. This in turn made reloading relatively slow. The Mauser design, the G41(M), failed as it, along with its G41(W) counterpart, suffered from gas system fouling problems. Only 6,673 G41(M) rifles were produced before production was halted, and of these, 1,673 were returned as unusable.
Mauser C78 "zig-zag" RevolverEdit
The Mauser C78 zig-zag was a revolver manufactured by Mauser during the late 19th century. It was Paul Mauser's first handgun design.
Mauser branched out into pistol design in 1896, producing the C96, commonly known as "broomhandle," designed by the three brothers Fidel, Friedrich, and Josef Feederle (often erroneously spelled "Federle"). All versions used detachable shoulder stock holsters. Over a million C96s were produced between 1896 and the late 1930s.
Mauser 1910 and 1914 pocket pistolsEdit
The Mauser Model 1910 was a small self-loading pistol chambered for .25 ACP (6.35 mm). It was introduced in 1910; an updated model chambered for .32 ACP (7.65 mm), the Mauser Model 1914, came out in 1914. Most of these were used by the Wehrmacht and the Kriegsmarine. They were also sold commercially.
Mauser Model 1934 pocket pistolEdit
This was a small pocket pistol chambered for .32 ACP (7.65mm) based on the earlier Model 1910/14. The Mauser Model 1934 is virtually identical to the 1914 except for the grip, which has a more curved back. It was used by the Kriegsmarine and was also sold commercially.
The Mauser HSc was a self-loading handgun introduced in the 1940s. It was a compact double-action blowback design in .32 ACP. Production ran from 1940 until the end of World War II, and in the 1960s and early 1970s. The post-war models were also available in .380 ACP.
In 1940 the Mauser Company was invited to take part in a competition to re-equip the German Army with a semi-automatic rifle, the Gewehr 41. A number of impractical requirements were specified, including that the design should not use holes drilled into the barrel to take off gas for the operating mechanism, thereby requiring mechanisms that proved unreliable. Two designs were submitted, and the Mauser version, the G 41(M), failed miserably in testing. It was canceled after a short production run. The resulting design did not see real success before it was switched to a simpler gas-operated system in the Gewehr 43. During World War II, the Mauser factory in Oberndorf was strategically bombed by the Allies, resulting in the deaths of 26 workers and the destruction of the company's power plant. French forces entered Oberndorf (which they subsequently occupied for some time) on 20 April 1945 when the town's mayor and planning committee surrendered without any resistance; no blood was shed there on that day.
After the war in Europe, the factory was briefly put back in order to produce weapons for the now under-equipped and exhausted French military. The plant was dismantled by the occupying forces for the purpose of war reparations, most factory buildings (approximately 60% in total) were demolished and the records destroyed on orders of the local French Army commander. For a number of years, Mauser Werke manufactured precision measurement instruments and tools, such as micrometers. Edmund Heckler, Theodor Koch, and Alex Seidel, former Mauser engineers, saved what they could and founded Heckler & Koch, which has since become Germany's main small-arms manufacturer. Mauser continued to make hunting and sporting rifles. In 1994, it became a subsidiary of Rheinmetall, a manufacturer of autocannons such as the Mauser BK-27 and other munitions until 2004, when it was merged into Rheinmetall Waffe Munition GmbH. In 1999 the civilian manufacture of hunting, defense, and sporting rifles were split off from Rheinmetall.
Mauser firearms after the Second World WarEdit
Mauser was formally re-established in the 1950s.
- Model 66
- Model 66 S
- Model 66 P
- Model 77
- Model 86 SR
- Mauser SP66 – a sniper rifle based on the Model 66. A further upgraded model was the Mauser 86 SR.
- Mauser Parabellum
In the 1995 the firearms division of Mauser was bought by Rheinmetall Berlin AG; the sale was completed in 1996 and the company is named Mauser-Werke Oberndorf Waffensysteme GmbH. Rheinmetall Berlin AG was renamed Rheinmetall AG in the same year.
In 1999 part of Mauser was sold to Schweizerische Industrie Gesellschaft (SIG) (no longer in the arms industry). This became Mauser Jagdwaffen GmbH. The division owned by Rheinmetall was named Mauser-Werke Oberndorf Waffensysteme GmbH.
In 2000 Mauser Jagdwaffen GmbH was sold to Luke & Ortmeier Group during the divestiture by SIG of all its firearms businesses but remains an operation.
In 2004 Rheinmetall Waffen Munition GmbH was formed by a merger of Rheinmetall W & M GmbH, Mauser-Werke Oberndorf Waffensysteme GmbH, Buck Neue Technologien GmbH, Pyrotechnik Silberhütte GmbH and the NICO pyrotechnics Hanns-Jürgen Diederichs GmbH & Co. KG.
- Pre–World War II
- 20 mm FlaK 30/38 cannon
- 20 mm MG FF cannon—derivative in 1936 by Ikaria Werke Berlin of Swiss Oerlikon FF
- 20 mm MG 151 cannon/20
- 20 mm MG 213 cannon—developed during war but not put into production
- 30 mm MK 108 cannon developed in 1940v by Rheinmetall-Borsig
Note: The reference from Sportsmansvintagepress is a reprint of the W.H.B. Smith: Mauser Rifles and Pistols 
- "Mauser History". mauserguns.com. Retrieved 28 February 2017.
- Tong, David. "Where It All Began: The Gewehr 98 Mauser Rifle". chuckhawks.com. Retrieved 28 February 2017.
- "Wilhelm & Peter Paul Mauser". sportsmansvintagepress.com. Retrieved 28 February 2017.
- Olson 1976, pp. 1–3.
- Olson 1976, p. 3.
- Olson 1976, p. 4.
- Olson 1976, p. 5.
- Olson 1976, pp. 5–7.
- Smith 1990, p. 14.
- Olson 1976, p. 9.
- Olson 1976, p. 10.
- Olson 1976, p. 22.
- Smith 1990, pp. 54–55.
- Smith 1990, p. 17.
- Venola 2010.
- Walter, John (2006). Rifles of the World. Krause Publications. pp. 307–310. ISBN 0-89689-241-7.
- Robert, Ball (2011). Mauser Military Rifles of the World. Gun Digest Books. pp. 73–76, 255. ISBN 1-4402-1544-8.
- Johnson, Melvin M. Jr. (1944). Rifles and Machine Guns. New York: William Morrow & Company. p. 89.
- "The company background". gehmann.com. Retrieved 10 March 2017.
- "THE MAUSER 77". revivaler.com. Retrieved 10 March 2017.
- "Mauser 86 SR sniper rifle (Germany)". modernfirearms.com. Retrieved 10 March 2017.
- "Mauser SP66 sniper rifle (Germany)". modernfirearms.net. Retrieved 10 March 2017.
- Kant, Joop Van de. The Mauser Parabellum 1930-1946, Analysis of a Million Luger Pistols. HaKa Arms Publications Co. ISBN 978-0982690307.
- "The Mauser History". mauser.com. Retrieved 28 February 2017.
- "Rheinmetall Weapon Munition GmbH". rheinmetall-defence.com. Retrieved 28 February 2017.
- Smith, W.H.B. (2014). Mauser Rifles and Pistols. Sportsman's Vintage Press. ISBN 978-1940001241.
- "C96 Broomhandle". mauserguns.com. Archived from the original on April 22, 2012. Retrieved May 7, 2012.
- Olson, Ludwig Elmer (1976) . Mauser Bolt Rifles (3rd ed.). Montezuma, Iowa: F. Brownell & Son. ISBN 978-0-9767409-4-0.
- Sams, Stanhope (August 1, 1898). "The Krag-Jorgensen Gun: It Is Inferior In Many Respects To The Mauser Used By The Spaniards" (PDF). The New York Times. Retrieved May 8, 2012.
- Smith, W.H.B. (1990) . Mauser Rifles and Pistols. Prescott, Arizona: Wolfe Publishing Company. ISBN 978-0-935632-94-1.
- Venola, Richard (September 23, 2010). "Plezier Mauser". Retrieved May 8, 2012.
- Folleto descriptivo del Mosquetón Mauser 7,62, trasformado de 7 mm. 2nd ed. Madrid. 1969.
|Wikimedia Commons has media related to Mauser.|
- Persian Mauser
- Zastava Arms
- The Mauser Bolt Rifles FAQ
- M1878/80 Mauser Milovanovic
- Luger Artillery and Mauser Parabellum
- The website from Mauser-Waldeck Safes
- Paul Mauser Archive web site by Mauro Baudino and Gerben van Vlimmeren.
- Nazarian's Gun's Recognition Guide: A member of NZR Para (PMC) with a somewhat modified K98k
- Nazarian's Gun's Recognition Guide FN 98 Manual (.pdf)
- Documents and clippings about Mauser in the 20th Century Press Archives of the German National Library of Economics (ZBW)