ProfessorCui

ProfessorCui, you are invited to the Teahouse!

Hi ProfessorCui! Thanks for contributing to Wikipedia. Be our guest at the Teahouse! The Teahouse is a friendly space where new editors can ask questions about contributing to Wikipedia and get help from experienced editors like Missvain (talk). Visit the Teahouse We hope to see you there! Delivered by HostBot on behalf of the Teahouse hosts 16:04, 17 September 2018 (UTC)

Welcome!

Hello, ProfessorCui, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are a few links to pages you might find helpful:

• Introduction and Getting started
• Contributing to Wikipedia
• The five pillars of Wikipedia
• How to edit a page and How to develop articles
• How to create your first article
• Simplified Manual of Style

You may also want to complete the Wikipedia Adventure, an interactive tour that will help you learn the basics of editing Wikipedia. You can visit the Teahouse to ask questions or seek help.

Please remember to sign your messages on talk pages by typing four tildes (~~~~); this will automatically insert your username and the date. If you need help, check out Wikipedia:Questions, ask me on my talk page, or , and a volunteer should respond shortly. Again, welcome! Zackmann08 (^{Talk to me}/_{What I been doing}) 19:08, 17 September 2018 (UTC)

September 2018

Hello, I'm Zackmann08. Thank you for your recent contributions to GlobalX. I noticed that when you added the image to the infobox, you added it as a thumbnail. In the future, please do not use thumbnails when adding images to an infobox (see WP:INFOBOXIMAGE). What does this mean? Well in the infobox, when you specify the image you wish to use, instead of doing it like this:

|image=[[File:SomeImage.jpg|thumb|Some image caption]]

Instead just supply the name of the image. So in this case you can simply do:

|image=SomeImage.jpg.

There will then be a separate parameter for the image caption such as |caption=Some image caption. Please note that this is a generic form message I am leaving on your page because you recently added a thumbnail to an infobox. The specific parameters for the image and caption may be different for the infobox you are using! Please consult the Template page for the infobox being used to see better documentation. Thanks! Zackmann08 (^{Talk to me}/_{What I been doing}) 19:08, 17 September 2018 (UTC)

Your submission at Articles for creation: Cooperative 3D Printing has been accepted

Cooperative 3D Printing, which you submitted to Articles for creation, has been created.
The article has been assessed as Redirect-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. If your account is more than four days old and you have made at least 10 edits you can create articles yourself without posting a request. However, you may continue submitting work to Articles for Creation if you prefer.

• If you have any questions, you are welcome to ask at the help desk.
• If you would like to help us improve this process, please consider .

Thank you for helping improve Wikipedia!

— Frayæ (Talk/Spjall) 18:22, 24 September 2018 (UTC)

Your submission at Articles for creation: Swarm 3D Printing (November 13)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by K.e.coffman were: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Swarm 3D Printing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Swarm 3D Printing, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

K.e.coffman (talk) 00:48, 13 November 2018 (UTC)

Your submission at Articles for creation: Microheater Array Powder Sintering (December 6)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Jovanmilic97 was:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Microheater Array Powder Sintering and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Microheater Array Powder Sintering, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

Jovanmilic97 (talk) 18:28, 6 December 2018 (UTC)

Your submission at Articles for creation: Swarm 3D Printing (March 6)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Theroadislong was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Swarm 3D Printing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Swarm 3D Printing, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

Theroadislong (talk) 08:16, 6 March 2019 (UTC)

Your submission at Articles for creation: Swarm 3D Printing (March 7)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by AngusWOOF were:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Swarm 3D Printing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Swarm 3D Printing, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
• You can also use Wikipedia's real-time chat help from experienced editors.

AngusWOOF (bark • sniff) 03:52, 7 March 2019 (UTC)

Your submission at Articles for creation: Swarm 3D Printing (June 22)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by MJL were:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Swarm 3D Printing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Swarm 3D Printing, click on the "Edit" tab at the top of the window, add "{{db-self}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

–MJL ‐Talk‐^☖ 14:15, 22 June 2019 (UTC)

Your submission at Articles for creation: Swarm 3D Printing has been accepted

Swarm 3D Printing, which you submitted to Articles for creation, has been created.
The article has been assessed as Stub-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. If your account is more than four days old and you have made at least 10 edits you can create articles yourself without posting a request. However, you may continue submitting work to Articles for Creation if you prefer.

• If you have any questions, you are welcome to ask at the help desk.
• If you would like to help us improve this process, please consider .

Thank you for helping improve Wikipedia!

Theroadislong (talk) 09:32, 18 October 2019 (UTC)