Biswas a

Welcome Biswas a!

Now that you've joined Wikipedia, there are 48,271,596 registered users!

Hello, Biswas a. Welcome to Wikipedia and thank you for your contributions! I'm Paine Ellsworth, one of the other editors here, and I hope you decide to stay and help contribute to this amazing repository of knowledge.

Some pages of helpful information to get you started:   Introduction to Wikipedia   The five pillars of Wikipedia   Editing tutorial   How to edit a page   Simplified Manual of Style   The basics of Wikicode   How to develop an article   How to create an article   Help pages   What Wikipedia is not

Some common sense Dos and Don'ts:   Do be bold   Do assume good faith   Do be civil   Do keep cool!   Do maintain a neutral point of view   Don't spam   Don't infringe copyright   Don't edit where you have a conflict of interest   Don't commit vandalism   Don't get blocked

If you need further help, you can:   Ask a question

or you can:   Get help at the Teahouse

or even:   Ask an experienced editor to "adopt" you

Alternatively, leave me a message at my talk page or type {{helpme}} here on your talk page, and someone will try to help.

There are many ways you can contribute to Wikipedia. Here are a few ideas:   Fight vandalism   Be a WikiFairy or a WikiGnome   Help contribute to articles

Perform maintenance tasks   Become a member of a project that interests you   Help design new templates

Remember to always sign your posts on talk pages. You can do this either by clicking on the button on the edit toolbar or by typing four tildes (~~~~) at the end of your post. This will automatically insert your signature, a link to this (your talk) page, and a timestamp.

The best way to learn about something is to experience it. Explore, learn, contribute, and don't forget to have some fun!
To get some practice editing you can use a sandbox. You can create your own private sandbox for use any time. Perfect for working on bigger projects. Then for easy access in the future, you can put {{My sandbox}} on your user page. By the way, seeing as you haven't created a user page yet, simply click here to start it.

Sincerely, Thank you! and Best of everything to you and yours! – Paine  15:40, 19 April 2015 (UTC)   (Leave me a message)

• Español
• Deutsch
• Français
• Italiano
• עברית
• Русский
• 日本語
• Polski
• فارسی

Pacinian corpuscle

Hello Biswas a - re your comments on recent edits - knowledgeable edits are of course always welcome and your points are interesting. You mentioned having references used in your thesis and I wondered if it was possible for you to add these to your edits? My own knowledge of the subject is quite superficial. Best --Iztwoz (talk) 10:01, 28 June 2021 (UTC)

Hi Iztwoz,

I shall do my best to add those primary references. It needs some time from my side. Also I shall request my research students who are working in this area to improve that page further.

Thanks.

--Abhijit Biswas

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 8)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by JavaHurricane were:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

JavaHurricane 07:00, 8 July 2021 (UTC)

Hello, Biswas a! Having an article declined at Articles for Creation can be disappointing. If you are wondering why your article submission was declined, please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! JavaHurricane 07:00, 8 July 2021 (UTC)

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by KylieTastic were:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

KylieTastic (talk) 09:15, 11 July 2021 (UTC)

Hi KylieTastic,

I have further edited this page addressing your concerns. Please review it.

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by Pahunkat were:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Pahunkat (talk) 11:32, 11 July 2021 (UTC)

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Timtrent was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Fiddle^Timtrent Faddle^Talk to me 20:20, 11 July 2021 (UTC)

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 12)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Theroadislong was:  The comment the reviewer left was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

• If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
• If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
• If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
• If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Theroadislong (talk) 20:01, 12 July 2021 (UTC)

Wikipedia's "conflict of interest" guideline, and other related issues

If you are connected to someone or something you have written about (a few examples are writing about yourself, your business, your band, a member of your family, your client) then you should be aware that Wikipedia's conflict of interest guideline discourages you from writing about that subject. The main reason for that is that experience over the years indicates that editors with such a connection to a subject they are writing about are likely to find it very difficult, or even impossible, to stand back from their writing and see how it will look from the detached perspective of an outsider, so that they are likely to write in ways that look promotional to others, even if they sincerely think they are writing in a neutral way. Also, if your editing forms all or part of work for which you are paid, whether as an employee, as a contractor, or in any other capacity, the Wikimedia Foundation's terms of use require you to state who is paying you, and what your connection to them is. (To avoid the possibility of a surprisingly common misunderstanding, editing is part of paid work if it is done as part of normal employment or as part of a work to a contract, whether or not a specific payment earmarked for editing Wikipedia is made.)JBW (talk) 09:40, 13 July 2021 (UTC)

Hi JBW, I agree with this point of view of Wikipedia. Only point is that there was a page created long back (in 2007) which is now deleted. I just wanted to address the issues for which it was deleted. I have not seen this page before 2020 July, the time I joined CPDM. As I am now involved this organization, I think someone else outside from this organization should take the responsibility of restoring the page. Hope Wikipedia reviewers will apply this policy across all the pages and I completely support that. Thanks for clarifying this. Biswas a (talk)

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 23)

Your recent article submission has been rejected. If you have further questions, you can ask at the Articles for creation help desk or use Wikipedia's real-time chat help. The reason left by Tamingimpala was: This topic is not sufficiently notable for inclusion in Wikipedia. The comment the reviewer left was: Rejecting as the re-submission is persistent despite the previous declinations.

Tame (talk) 21:01, 23 July 2021 (UTC)