This article needs additional citations for verification. (December 2007) (Learn how and when to remove this template message)
The V10 configuration is not an inherently balanced design like a straight-6, V12, boxer engine, or V8 (ignoring the counterweights) and does still have a small second order rocking motion, which can only be compensated by balance shafts.
Until recently, the V10 configuration was not a common configuration for road cars ; a V12 is only slightly more complicated and runs more smoothly, while a V8 is less complex and more economical. For the Lexus LFA, the engineers selected a V10 engine over an equivalent displacement V8 because they could not get the V8 to rev as high as the V10, and over a V12 for its lower reciprocating mass, allowing for more rapid engine response. For Audi in their Audi R8 5.2 FSI quattro, the V10 was a compromise between a V12, which would be too long and suffer more internal friction due to extra cylinders and valves, and a V8 which would be more compact but have larger, heavier pistons and have a lower redline.
The Dodge V10 engine saw its first production use in substantially revised form in the Dodge Viper sports car, while the truck version of the engine was used starting with the 2nd generation Dodge Ram. It discontinued in that application after 2003. However, 2003 also saw the introduction of the Dodge Ram SRT-10, a performance model meant to rival Ford's successful V8 powered F-150 SVT Lightning. The Viper engine (a 90-degree engine with odd firing order to make a balance shaft unnecessary) has been tweaked through the years, and for the fifth-generation Viper produces 640 hp (477 kW; 649 PS) in a standard state of tune from its 8.4 liter displacement. The previous generation engine is used by Bristol, in tuned form, in their two-seat Fighter coupe, where it can produce upward of 630 hp (470 kW; 639 PS).
Ford also developed a heavy-duty V10 version of their Triton engine to replace the 460 big block in truck applications. It was introduced in the E-Series/Econoline full-size van. The F-Series Super Duty and Excursion SUV furthered the engine's popularity. The Triton 6.8 V10 is still in production today.
European marques were slower to adopt the V10 configuration. However, high-revving V10 power-plants were incorporated into supercars from Lamborghini, Audi and Porsche. BMW and Audi later unveiled ten-cylinder versions of their mid-range saloons (the BMW 5 Series and Audi A6 families, respectively). Audi here profited from their Lamborghini ownership, which allowed them to source the Gallardo's V10 for their own cars. Volkswagen also developed a turbodiesel V10; their Volkswagen Phaeton was the first production sedan to have a V10.
A list of post-war V10-engined production cars (sorted alphabetically by manufacturer, sub-sorted by year of introduction):
- Audi S6 (C6): 5.2L
- Audi RS6 (C6): 5.0L bi-turbo
- Audi S8 (D3): 5.2L
- Audi R8: 5.2L
- BMW M5 (E60/E61): 5.0L
- BMW M6 (E63/E64): 5.0L
- Bristol Fighter (Dodge V10)
- Dodge Viper: 8.0L/8.3L/8.4L
- Dodge Ram 2500/3500 Heavy Duty (pickup trucks)
- Dodge Ram SRT-10 (pickup truck): 8.3L
- Ford E-350 (full-size van): 6.8L
- Ford Super Duty (pickup trucks): 6.8L
- Ford Excursion (¾ ton SUV): 6.8L
- GTA Spano (Dodge V10)
- Italdesign Zerouno
- Lexus LFA: 4.8L
- Lamborghini Gallardo: 5.0L/5.2L
- Lamborghini Huracán: 5.2L
- Lamborghini Sesto Elemento: 5.2L
- Porsche Carrera GT: 5.7L
- VLF Force 1: (Dodge V10)
- Volkswagen Touareg: 5.0 TDI PD
- Volkswagen Phaeton: 5.0 TDI PD
- Wiesmann GT MF5 (BMW S85-B50)
The most widespread use of the V10 has been in Formula One racing. Alfa Romeo made the first modern Formula One V10 in 1986, although it was never used in a Formula One car and later it installed in Alfa Romeo 164 Procar. Later the configuration was introduced by Honda and Renault before the 1989 season. The introduction of the 3.5 liter rule after turbos were outlawed following 1988 made the V10 seem the best compromise between the lower weight of a V8 and the higher power of a V12. V10 engines became commonplace after the reduction from 3.5 to 3 liters in 1995, and were used exclusively by teams from 1998 to 2005. Renault had a flatter 110° angle in 2002 and 2003, but reverted to a more conventional 72° following the change in rules which dictated that an engine must last two race weekends. In a further change to the rules, V10s were banned for the 2006 season onwards in favor of 2.4 liter V8s, however a concession was made in that season for teams to use significantly rev limited V10s; Scuderia Toro Rosso being the only team to use this option.
The Audi R15 LMP1 Uses a TDI V10 diesel engine which made its debut in 2009 12 Hours of Sebring. This car completed the most laps ever in Le Mans 24 history.
There are also cars with V10 engines in sports car racing, usually with Judd power plants with 4 or 5 liter engines, made available for customers, although the first V10 was seen in the works Peugeot 905, in the two final races of the 1990 World Sportscar Championship season. It was also seen in the works Toyota TS010 that appeared at the end of 1991.
- "Engineering Explained: The Pros And Cons Of Inline 5s, V10s And Rotary Engines". Car Throttle. 10 Nov 2014. Retrieved 2 June 2019.
- Simona (29 Jul 2006). "Engine's History". Top Speed. Retrieved 2019-06-02.
- "2012 Lexus LFA - First Drive Review - Auto Reviews". Car and Driver. 2009-10-20. Archived from the original on 2009-10-24. Retrieved 2009-10-22.
- "2011 Lexus LF-A". Jalopnik.com. 2008-04-15. Retrieved 2010-10-09.
- "Are You Lexus Supercar Material? Lexus of Watertown Asks Savvy Car Consumers in Greater Massachusetts". PR.com. 2009-11-23. Retrieved 2010-02-22.
- "2007 Audi S8 First Test and Review". Motor Trend. 2006-11-06. Retrieved 2012-11-02.
- Sidhu, Harvinder. "552hp Lexus LFA launched - all you need to know". Paultan.org. Retrieved 2010-12-14.
- "164 Pro-Car". velocetoday.com. Retrieved 2007-12-28.