Talk:Load-following power plant

Latest comment: 2 years ago by Amakuru in topic Requested move 13 January 2022

Sources

edit

I would love to get some sources for this article. It is based upon my years of researching the energy field, picking up a little here and there. Unfortunately, I do not know of any good sources for it. None of the books I have on energy mention load following plants and only one mentions base load and peaking power plants. The sources that I have found are less than ideal. They are almost all commercial websites that confirm a detail or two, and most were probably written by people with no more knowledge than I have. A few of them were clearly written by people who are less knowledgeable (not that I am an expert, the article may contain some mistakes, although some of what people think of as mistakes may just be regional variations). -- Kjkolb 05:32, 19 February 2007 (UTC)Reply

Thanks for your article. I added a reference to Renewable and Efficient Electric Power Systems By Gilbert M. Masters, parts of which can be viewed on Google books. http://books.google.co.uk/books?id=dZG7EFaOPSMC&pg=PP1&dq=gilbert+masters —Preceding unsigned comment added by 78.156.66.163 (talk) 11:59, 20 July 2009 (UTC)Reply

Gas turbines

edit

Thanks for the article. This has helped me a great deal to understand the ways electricity providers manage supply conditions to meet load. However, the section on Gas turbine power plants doesn't seem to fit with the other explanations. I would think that gas turbine power plants would the ideal candidate for load following. In other words the peakers would be older and less efficient coal and oil power plants, with the same gas turbine plants always topping off the power supply to meet the load through their highly variable operability. Here's what I would think. The same gas turbine plants would round out the power supply whether the peakers were running or not, implying that the gas turbine would need to be capable of filling in the continuous capacity between base loads and peak loads and then provide the same added power again on top of the peakers when the peak plants are brought online.

_______________________________________________________________________________
| load following: gas turbine during peak load hours or months                 |
| peaker plants: less efficient and perhaps smaller coal – oil turbine plants  |
| load following: gas turbine during off-peak load hours or months             |
| base load plants: nuclear – coal – some hydroelectric –                      |
|______________________________________________________________________________|

It seems that the hydroelectric plants can act as any of these three types too (base, peak or load following) depending on the type of hydroelectric and the behavior of the waterways it damns. It seems too that only gas, oil and hydroelectric will serve well as load following plants. Am I understanding this correctly? Indexheavy (talk) 03:02, 4 June 2009 (UTC)Reply


Shouldn't there be a section for diesel-gas engine solutions? — Preceding unsigned comment added by Nyonglema (talkcontribs) 13:24, 29 September 2014 (UTC)Reply

Nuclear power plants

edit

You may want to refer to http://www.neimagazine.com/features/featureload-following-capabilities-of-npps/ . Load following by NPPs is done in several countries (which have a high nuclear share in electricity generation) --160.44.230.196 (talk) 08:01, 4 November 2013 (UTC)Reply

Categories of power plants

edit

This is my understanding. Base load plants are those that have the least savings when de-rated; run at less than maximum power. I assume that this means those plants that have the lowest variable unit cost. You do not save much by running a nuclear plant at less than 100%. The fuel degrades at about the same rate. This is almost a situation of zero marginal cost: use it or lose it. So they run.

When the nuclear plants are in an outage, then some other generation facility may be forced to run at 100% of nameplate, and fulfills the "always on" condition, and those who work in those plants are happy to prove to the management that they can do it. But the marginal cost is the fuel cost, so that the cost of coal can be saved by running at less that maximum, if the demand falls. Steam turbines are run by steam, so that there is a limit to how quickly these plants can respond to changes in demand, and may not be able to keep up. These are, to my experience, classed as load-following, because they chase the load, but cannot be counted on to "catch it" in a timely manner.

There is always "spinning reserve" - units running synchronized to the grid cycles, not generating power, but ready to step in as needed.

Gas turbine power plants are generally used for peaking, because the time it takes to go from a stopped state to synchronized with the grid is short, measured in minutes.

Solar and wind are different. Since there is no fuel cost, they are in use-it-or-lose-it state, which seems like it would be good for base load. Base load has been considered to be "aways on", and this is not true for solar or wind. It is true that even nuclear is not "always on", since nuclear plants can be down for an emergency, or for a scheduled re-fueling.

Hydro power is that magical source: base load, no fuel cost. And pumped storage is like a large battery that can be charged and discharged as needed.

Fuel oil is used only for emergency generators in the USA. There are no large plants that use oil as a fuel in the USA, that I know of. Many plants have diesel generators for "black start" capability - namely to start up the equipment at the plant, and the soft drink machines, when recovering from a black-out situation. ( Martin | talkcontribs 03:59, 26 March 2015 (UTC))Reply

edit

Hello fellow Wikipedians,

I have just modified one external link on Load following power plant. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 19:54, 4 January 2018 (UTC)Reply

First paragraph is misleading

edit

The first paragraph on base power plants is very misleading. The list of technologies which contribute to base power reads as if all coal, nuclear, gas etc. are strictly base power technologies. This is all walked back in the later sections, but it is a really bad way to start an otherwise decent article. Please edit this paragraph to exclude the technologies and concentrate on the attributes that distinguish base power from load following power.

Personally, I would begin with a discussion of time scales in load response, and then associate base power, load following power, peaker power, spinning reserves, etc. with these time scales. Include time scales right down to millisecond scales in this part to get the point across that there is a lot of detail to the overall balancing act. — Preceding unsigned comment added by 2602:306:BDFB:36A0:B583:6407:3BD1:4B0 (talk) 18:58, 14 February 2018 (UTC)Reply

Most of the article is a trainwreck right now, the entire thing needs a lot of work. Thanks for the suggestions. Garzfoth (talk) 02:41, 18 February 2018 (UTC)Reply

Requested move 13 January 2022

edit
The following is a closed discussion of a requested move. Please do not modify it. Subsequent comments should be made in a new section on the talk page. Editors desiring to contest the closing decision should consider a move review after discussing it on the closer's talk page. No further edits should be made to this discussion.

The result of the move request was: Moved  — Amakuru (talk) 21:27, 21 January 2022 (UTC)Reply


Load following power plantLoad-following power plant – English grammar? -- Beland (talk) 03:59, 13 January 2022 (UTC)Reply

The discussion above is closed. Please do not modify it. Subsequent comments should be made on the appropriate discussion page. No further edits should be made to this discussion.