Talk:Island-class patrol boat

Latest comment: 5 years ago by Billymac00 in topic Design Origins

Design Origins edit

It seems relevant to note that the Island Class was a (minor) modification of a successful British design also used in several other countries.Billymac00 (talk) 23:50, 24 July 2008 (UTC)Reply

here are two: uscg.mil
Bollinger shipyards --Billymac00 (talk) 22:54, 15 June 2018 (UTC)Reply

Article Name edit

As there are, or have been, other USCG Cutters, should this article be moved to (renamed) Island Class Cutter or Island Class Patrol Boat? The PB in WPB refers to patrol boat. Pustelnik (talk) 14:06, 6 May 2009 (UTC)Reply

Comment The correct capitalisation would be either 'Island class cutter' or 'Island class patrol boat'. Benea (talk) 15:11, 6 May 2009 (UTC)Reply
Further comment I'd also choose 'Island class cutter', to try to avoid confusion with the Island class patrol vessels. Benea (talk) 15:18, 6 May 2009 (UTC)Reply
  • Comment -- I agree the article should be renamed. I started it, when I was a fairly new contributor, and I made a bad choice of names -- basing it on one of the first documents I read. Both Island Class Cutter and Island Class Patrol Boat are better choices than the current name. I think Island Class Cutter is the better of the two choices. I made the same mistake when I started the article on the "USCG Coastal Patrol Boat" -- trusting the first document I read about the vessels, for the choice of the article name. In retrsopect I think that article should have been named the "Marine Protector class". Geo Swan (talk) 16:16, 6 May 2009 (UTC)Reply
  • Agree with a rename. It would seem that Island class cutter (note the capitalization} would be the best title. --Brad (talk) 22:16, 6 May 2009 (UTC)Reply
  • New Proposal Sounds good to me. I would like to propose Island class cutter (USCG) to prevent confusion with the above named Island class patrol vessel. Pustelnik (talk) 00:48, 8 May 2009 (UTC)Reply
If both classes had the same name then we could start a disambiguation page. But the solution in this case would be to place a note on top of the Island class cutter article which says something like: Not to be confused with Island class patrol vessel. And then a similar note can be placed on Island class patrol vessel to point readers in the opposite direction. --Brad (talk) 00:14, 9 May 2009 (UTC)Reply
That sound like a solution to me. Pustelnik (talk) 01:20, 9 May 2009 (UTC)Reply
See if this works for you. Pustelnik (talk) 20:22, 10 May 2009 (UTC)Reply
I should have been more specific. The article should have been moved to Island class cutter and then have the explanations placed on each article. Island class cutter is more inline with the ship naming conventions on ship classes. --Brad (talk) 15:41, 11 May 2009 (UTC)Reply
And the template to use at the top of each article is {{distinguish}} --Brad (talk) 22:53, 11 May 2009 (UTC)Reply

Stern launching ramp edit

When this article was started the USCG either had not realized or had not acknowledged that the Matagorda and the other refitted vessels were unseaworthy. There was a very convincingly video showing the Matagorda deploy and retrieve its jet powered pursuit craft, at high speed, from its stern launching ramp. But, since the refitted vessels, with the stern launching ramp were all retired (scrapped?) perhaps this section should be deprecated. The smaller Marine Protector class were all built with basically the same stern launching ramp -- which, I presume, works fine in brand new vessels. Too bad there is no compelling video showing its used from one of those vessels. Geo Swan (talk) 16:16, 6 May 2009 (UTC)Reply

Please - personal gut thoughts here- verify before taking as fact ( I have never seen any Internet collaborating information) . The stern launching ramp is also on several other vessels. It is not they are un-seaworthy, but modifications opened up the hull and did not stiffen/ build strength into what was done and added, modifications to hull weakened it to a point that heavy seas may subject hull to stress to snap or destroy vessel. Also see the Cyclone class Navy Patrol Craft. Per this page -ships engines are either Paxman Valenta or Caterpillar. When vessels are which for engines? Is it all were Paxman Valenta as built - later replaced by Caterpillar on some. Or were some built wiht Caterpillar ? Wfoj2 (talk) 20:25, 10 March 2013 (UTC)Reply

When were they constructed? edit

How was something as basic as a construction date left out of this article?? Monolith2 (talk) 07:24, 4 February 2013 (UTC)Reply

@Monolith2: I agree. And I found the answer in the Czech version of the article (linking to an article in English): 1985-1992. --Н Француз (talk) 08:08, 22 June 2017 (UTC)Reply