M16 bolt locking
M16 bolt unlocking

Rotating bolt is a method of locking the breech (or rear barrel) of a firearm closed for firing. Johann Nicolaus von Dreyse developed the first rotating bolt firearm, the "Dreyse needle gun", in 1836. The Dreyse locked using the bolt handle rather than lugs on the bolt head like the Mauser M 98 or M16. The first rotating bolt rifle with two lugs on the bolt head was the Lebel Model 1886 rifle. The concept has been implemented on most firearms chambered for high-powered cartridges since the 20th century.

Radial-delayed blowback.

Design

edit

Ferdinand Ritter von Mannlicher, who had earlier developed a non-rotating bolt straight-pull rifle, developed the Steyr-Mannlicher M1895, a straight-pull rifle with a rotating bolt, which was issued to the Austro-Hungarian Army. Mannlicher then developed the M1893 auto rifle which had a screw delayed bolt and later the Mannlicher M1900 operated by a gas piston. This was an inspiration for later gas operated, semi-automatic and selective fire firearms (such as the M1, M14, M16, the L85A1/A2 and the AK-47/74) in which the bolt, upon contact with the breech, rotates and locks into place, the lugs on the bolt locking into the breech or barrel extension.

Upon closing, the bolt goes forward into barrel extension or locking recesses in the receiver, and then rotates; at this point it is locked in place. The bolt remains locked until the action is cycled, either manually by the operator, or mechanically by delayed blowback, recoil operation, or gas operation which then rotates the bolt and unlocks it from the breech so that it can be withdrawn in order to extract and eject the spent casing, and the next round can be chambered. In gas operation, the gas port, which meters a portion of the combustion gases into the action in order to cycle the weapon, is typically located either midway down the barrel or near the muzzle of the weapon. In this way it functions as a delay, ensuring that the bolt remains locked until chamber pressure has subsided to a safe level.

Rotating bolts are found in delayed blowback, gas-operated, recoil-operated, bolt action, lever-action, and pump-action weapon designs. In some forms of delayed blowback, the rotating bolt is used as the delay mechanism: the bolt head rotates as the firing pin strikes, locking the chamber until the gas pressure reaches a safe level to extract. As the firing pin retracts, the bolt head turns anti-clockwise unlocking the breech.

Examples

edit

See also

edit

References

edit
  1. ^ Walter, John (2006). Rifles of the World (3rd ed.). Iola, WI: Krause Publications. p. 142. ISBN 978-0-89689-241-5.
  2. ^ Sweeney, Patrick (2010). The Gun Digest Book of The AR-15 (Vol. 3.). Iola, WI: Gun Digest Books. p. 20. ISBN 978-1440213762.
  3. ^ "Automatisch kanon Oerlikon KBA". Nationaal Militair Museum (in Dutch). Retrieved 2024-03-20.
  4. ^ Modern Firearms – TAR-21 assault rifle Archived 2004-10-12 at the Wayback Machine. World.guns.ru. Retrieved on 2024-03-21.
  5. ^ Hogg, Ian (2000-02-10). Military Small Arms of the 20th Century. Krause Publications. ISBN 978-0-87341-824-9.
  6. ^ Ayoob, Massad (14 May 2014). Gun Digest Book of SIG-Sauer. Iola, Wisconsin: F+W Media. ISBN 978-1-4402-3920-5.
edit