This article needs additional citations for verification. (July 2012) (Learn how and when to remove this template message)
|Original gauge||4 ft 8 1⁄2 in (1,435 mm) standard gauge|
|Operated by||Peak Rail|
|Length||4 miles (6.4 km)|
|Preserved gauge||4 ft 8 1⁄2 in (1,435 mm)|
|1987||Peak Rail acquires Darley Dale and Track Relay work begins|
|1991||Peak Rail, Granted Light Railway Order|
|1992||Peak Rail Re-opens, Train Rides officially begin|
|1997||Rowsley South reached, PR extended|
|Peak Rail reaches Matlock (Platform 2),|
First ever steam through service since 1968
The preserved railway line is over three and a half miles (5.6 km) in length and, as of April 2016[update], operates train services from Matlock station (shared with Derwent Valley Line services from Derby via Ambergate) via the site of Matlock Riverside and Darley Dale to Rowsley South.
Peak Rail intends to extend its operational services northward to Bakewell when resources allow, extending to a total of 4.25 miles (6.84 km). Beyond Bakewell, the railway trackbed is used by the Monsal Trail.
- 1 History
- 2 Future developments
- 3 Special events
- 4 Operating groups at the railway
- 5 Motive power
- 6 Former Residents
- 7 Signalling on the railway
- 8 Darley Dale footbridge
- 9 See also
- 10 References
- 11 External links
First preservation attempts with the Buxton Steam CentreEdit
In 1975, the Peak Railway Preservation Society was established and opened a site at the now-closed Buxton Steam Centre with restoration facilities and a 300-yard operating line. They also operated a successful restaurant ("The Palatine") in two railway carriages on site. Proposals were put forward to extend the operating line onto the single track freight line towards Peak Forest, but were not met with success. However a bridge was purchased and installed over Charles Street to reconnect to NR's Ashwood Dale route. The bridge was never used as the whole site was sold to Buxton Water who built a factory shortly after Peak Rail moved to Darley Dale using funds from the sale. The factory was demolished in 2011 and the site is vacant again and so available should Peak Rail ever reach Buxton. The BBC reports that the station site was proposed for redevelopment in 2014.
The Buxton Advertiser reported (20/6/19) that a meeting had been held to reoccupy the Buxton site and start a new Buxton Branch within 2 months with the first priority being to clear the site.. The Peak Rail Association news quotes the support of the local MP however the builder of a new development is causing difficulties with access.
Closure of the Buxton Steam Centre and relocation to Darley DaleEdit
In 1997, the line was extended within a half-mile south of the Derbyshire village of Rowsley itself. A new station was constructed next to the site of the former loco shed at Rowsley South. The station was capable of holding long incoming charter trains and had a car park to accommodate a large number of cars and other vehicles. The station at Rowsley South has also been used for local charity events and cycle races, as well as steam and vintage vehicle rallies. With its location on the edge of the Peak District, the railway joins other attractions in the area, including Bakewell, Haddon Hall, Chatsworth House, the Rowsley shopping village, the village of Rowsley and the Cauldwell's Mill museum.
Extension to Matlock (Network Rail) stationEdit
After the construction of the Matlock by-pass, and the new Sainsburys supermarket in the former Cawdor Quarry, a new track alignment and track layout was installed between Matlock Riverside and Matlock (Network Rail) station to provide a new connection to the national network.
Discussions regarding access to the Matlock down platform have resulted in an agreed 50-year lease, including the re-connection of the Network Rail and Peak Rail metals. The rails were originally disconnected due to a rearrangement of Network Rail track as a part of other redevelopments in the area south of the present Matlock Riverside station.
The extension to Matlock (NR) was finally re-opened on 2 July 2011.
This section possibly contains unsourced predictions, speculative material, or accounts of events that might not occur. Information must be verifiable and based on reliable published sources. (August 2012) (Learn how and when to remove this template message)
In 2004, Derbyshire County Council published a study which concluded that reopening the former line for a local service was technically feasible and that the track bed should remain clear of development, but it was not an economic possibility in the near future.
Expansion towards BakewellEdit
An extension towards Bakewell would include moving Rowsley station into the village, with full restoration of the former Rowsley Station site to its former condition, and expansion towards Bakewell via Haddon Halt:
- Phase 1 would restore and re-lay track to the site of Rowsley station in Rowsley itself, plus replacement of one or two bridges.
- Phase 2 would be reinstating a bridge joining up to Rowsley viaduct above a nearby road, followed by restoration of both the viaduct and trackbed as far as a proposed Haddon Halt.
- Phase 3 would then be restoring both the old Haddon Tunnel and Coombes Road viaduct to former use before relaying track to a few metres from the edge of the Bakewell station site itself.
- Phase 4 would remove infill between the platforms, then relaying track into the old station site and then restoring the site to its former use.
Negotiations for the lease of the mile of trackbed to the north have resulted in the offer of a 99-year lease, from Rowsley South to Rowsley village. However, the extension is unlikely to happen until finance becomes available.
Derbyshire County Council and the Peak Planning Board supported a scheme to develop the trackbed from Bakewell to Blackwell Mill as a cycle track, the Monsal Trail. With a stated aim to extend to Matlock beyond the existing track the application shows a cycle path broadly following the trackbed as far south as Darley Dale. These plans acknowledge the existing railway as well as phase one of the extension project but make no mention of the proposed extension beyond Rowsley village toward Bakewell.
The railway operates special events as well as the normal timetabled services. These include "Santa Specials" for children and families, and the "Warring Forties" event, with battle re-enactments of World War Two skirmishes involving military vehicles and re-enactors on the site; Diesel Galas; and local music festivals.
A restaurant service called "The Palatine" operates on given days throughout the season, whilst at Darley Dale there is a museum of the line's local history.
Operating groups at the railwayEdit
Several railway preservation groups are based at the railway, often working in support of and cooperation with Peak Rail. These include:
- The Heritage Shunters Trust, which has a large collection of former British Railways and private company shunters.
- The Derbyshire Dales Narrow Gauge Railway, which operated narrow gauge trains over a short running line by the picnic ground at Rowsley. Presently all services on the DDNGR are cancelled until further notice.
- The LMS Carriage Association, which restore examples of L.M.S and other coaching stock.
- The Renown Repulse Locomotive Group, responsible for the restoration of two former British Rail Class 50 locomotives.
- Andrew Briddon, who has several of his locomotives based upon the railway.
- Other locomotive and stock owners who are restoring wagons and stock upon the line
For further details see Rowsley South.
- GWR 4575 Class 2-6-2 T No. 4588, built in 1927. Formerly based at the Dartmouth Steam Railway she was moved to Tyseley Locomotive Works in 2015 and is being overhauled at Tyseley prior to moving to Peak Rail.
- GWR 4575 Class 2-6-2 T No. 5553, built in 1928. Owned by Pete Waterman. Moved in 2015 from Crewe Heritage Centre. Undergoing overhaul.
- RSH No. 7136, built in 1944. (Carries No. 68013 "Royal Pioneer". Previously No.WD150)
- GWR 5205 Class 2-8-0 T No. 5224, built in 1924. Owned by Pete Waterman. Moved in 2015 from Crewe Heritage Centre and will be overhauled on site.
- GWR 5600 Class 0-6-2 T No. 6634, built in 1928. Owned by Pete Waterman. Moved in 2017 from the Severn Valley Railway following its restoration from scrapyard condition never commencing, is due to be restored to working order.
- BR 0-4-0 DM Class 01 no. D2953.  BR Green. Built in 1956. (Heritage Shunters Trust owned)
- BR 0-4-0 DH Class 02 no. D2854. BR Green. Built in 1960. (Heritage Shunters Trust owned)
- BR 0-6-0 DM Class 03 no. 03099. BR Blue. Built in 1960. (Heritage Shunters Trust owned)
- BR 0-6-0 DM Class 03 no. 03113. BR Blue. Built in 1960. (Heritage Shunters Trust owned)
- BR 0-6-0 DM Class 03 no. D2139. BR Green. Built in 1960. (Heritage Shunters Trust owned)
- BR 0-6-0 DM Class 04 no. D2284. BR Green. Built in 1960. (Heritage Shunters Trust owned)
- BR 0-6-0 DE Class 07 no. 07001. BR Blue. Built in 1962.
- BR 0-6-0 DE Class 08 no. 08016. BR Blue. Built in 1953.
- BR 0-6-0 DE Class 09 no. 09001. EWS Red. Built in 1959.
- BR A1A-A1A Class 31 no. 31270. Regional Railways livery. Built in 1961.
- BR 1Co-Co1 Class 44 no. D8 "Penyghent". BR Green. Built in 1959.
- BR 0-6-0 DE Class 97/6 no. 97654. Built in 1959.
- Thomas Hill Vanguard 4w DH "Charlie" no. 265V regular works train loco. Built in 1975.
- Thomas Hill Vanguard 4w DH "Cheedale" no. 284V. Built in 1979.
- Drewry/Vulcan Foundry 0-4-0 DM no. WD72229. Built in 1945.
- Hudswell Clarke 0-6-0 DM "Ashdown" no. D1186. Built in 1959.
- Yorkshire Engine Co 0-4-0 DH "James" no. 2675. Built in 1961.
- BR 0-6-0 DM Class 04 no. D2205. Built in 1953.
- BR 0-4-0 DM Class 06 no. 06003. BR Blue. Built in 1959.
- BR 0-6-0 DH Class 14 no. D9525. BR Green. Built in 1965.
- BR Co-Co Class 37 no. 37152. BR Railfreight livery. Built in 1963.
- BR Co-Co Class 50 no. 50030 "Repulse" BR large logo Blue. Built in 1968.
- Yorkshire Engine Co 0-6-0 DH no. 2940 of 1965 "Libby"
- BR 0-4-0 DH Class 02 no. D2866. BR Blue. Built in 1961.
- BR 0-4-0 DH Class 02 no. D2868. BR Green. Built in 1961.
- BR 0-6-0 DM Class 03 no. 03027. BR Blue. Built in 1958.
- BR 0-6-0 DM Class 03 no. 03180. BR Blue. Built in 1962.
- BR 0-6-0 DM Class 03 no. D2199. BR Green. Built in 1961.
- BR 0-6-0 DM Class 04 no. D2229. BR Black. Built in 1955.
- BR 0-6-0 DM Class 04 no. D2272. BR Green. Built in 1958.
- BR 0-6-0 DM Class 04 no. D2284. BR Green. Built in 1960.
- BR 0-6-0 DM Class 04 no. D2337. BR Green. Built in 1956.
- BR 0-6-0 DM Class 05 no. D2587. BR Green. Built in 1959.
- BR 0-6-0 DE Class 08 no. D3000. BR Black. Built in 1952.
- BR 0-6-0 DH Class 14 no. D9500. BR Green. Built in 1964.
- BR Co-Co Class 50 no. 50029 "Renown" BR Large Logo Blue. Built in 1968.
- North British 0-6-0 DH 27932 of 1959
- North British 0-4-0 DH 27097 of 1953 (oldest s.g. diesel hydraulic in the UK)
- Brush Traction 0-6-0 DE BT803 of 1979 (formerly with Tyne & Wear Metro and Channel Tunnel construction)
- Yorkshire 0-4-0 DH (2679 of 1961)
Diesel Multiple UnitsEdit
- BR Class 117 nos. 51354 and 51396 Network Southeast livery. Built in 1959.
Note that the locations given may not be current as locomotives move between railways from time to time.
- Hunslet Austerity 0-6-0ST No. 3883 built in 1944. (previous number WD 168 Lord Phil)
- GWR 4073 Class 4-6-0 no 7027 Thornbury Castle. Undergoing restoration from Scrapyard condition at the Crosville Depot in Weston-Super-Mare.
- LMS Stanier 8F Class 2-8-0 no 48624. Operational at the Great Central Railway, was originally painted in unauthentic LMS Crimson lake.
- MetroVick Co-Bo D5705, the sole remaining member of Class 28, was preserved from Swindon Works in 1980, stored at Darley Dale/Matlock Bath Goods Shed for many years before removal to Bury on the East Lancs Railway by 1998 for completion.[circular reference]
- 25265 (7615) Harlech Castle used on passengers trains in the 1990s. Now at Nemesis Rail (stored).[circular reference]
Signalling on the railwayEdit
There are four signal boxes on the route. Two boxes control the only two level crossings on the old Midland Railway main line route from Manchester to London St Pancras. The crossings are both in the Darley Dale area on the Peak Rail line. The third signal box at Rowsley is being commissioned to control the sidings and be a public viewing exhibit. This is the former Bamford signal cabin from the Hope Valley. There are plans at Rowsley South railway station for refurbishment and future operational use. The fourth cabin at Riverside came from Luffenham. It controls the Matlock connection to the national network.
- Matlock Riverside: an original BR cabin, formerly located at Luffenham junction. The restored cabin is mounted on a non prototypical stone-block base with an internal staircase to protect the box from vandalism, required due to its isolated location. The 19-lever frame was recovered from Glendon North Junction near Kettering. Mechanical interlocking allows the signals exiting and entering the loop via the Darley Dale end to be cleared in opposing directions when the cabin is switched out via the King locking lever.
- Darley Dale Crossing: controls the section from Darley Dale to Matlock Riverside under the one train staff key, as well as the other gated level crossing at Station Road. Based on an L.M.S. ground level design, it was erected in 2007 to replace the older Midland style replica cabin which had become life-expired.
- Darley Dale station: the passing loop at Darley Dale is worked using the Absolute Block method, with the signal box at the other end releasing the signal of the adjacent signal box to allow trains to enter the applicable up or down loop line. Due to the small length of the loop all signals are Home Starter combined signals, rather than the traditional separate distant, home and starter arrangements.
- Church Lane Crossing: controls the section from Darley Dale to Rowsley South under the no signaller token block method, as well as the traditionally gated level crossing at Churchtown. Originally this signal box came from Gorsey Bank level crossing on the nearby Wirksworth branch. The signals here are Midland Railway lower quadrant examples on wooden posts dating from 1927. The signal box operates the first preserved example of a "Josslock" motor point, an electro-hydraulically worked electro-pneumatic point machine, whereby a standard electro-pneumatic point is driven by a hydraulic power pack.
- Rowsley South: The Cabin was originally located at Bamford before it was moved to the up platform at Darley Dale initially, though it was never commissioned. Eventually it was moved to Rowsley in January 2014, whereafter restoration began. It will be used to control the loco shed sidings and yard exits as a shunt frame using a unique now in the UK, though still widely used in Europe, double wire driven point operation using the ex Barrow Hill sidings turnover style lever frame kindly donated by the National Railway Museum and point operating gear which has now been installed at Rowsley.
Two train runningEdit
In late February 2007, the railway's 'Two-Train Running' project was completed and approved by HM Railway Inspectorate. Through improvements to infrastructure and signalling, this project allows two trains in steam on the line, using a refurbished and extended passing loop at Darley Dale. Each section of the railway is worked by a train staff, each with a key to operate the ground frames and electrical signal releases at the signal boxes and the ground frames at Rowsley South, Rowsley North, Darley South Yard sidings and Matlock Riverside.
Darley Dale footbridgeEdit
In mid-2009, the original ex-Midland Railway Darley Dale footbridge was purchased from the Midland Railway - Butterley with an aim towards restoration and eventual repositioning at its original location at Darley Dale. Part of this project requires the removal of the unused signal box structure to facilitate the erection of the footbridge. Fundraising for this ambitious project began in late 2009 and remains continuously.
- "DerbyshireCC: Monsal Trail - Bakewell to Rowsley" (PDF).
- "DerbyshireCC: Monsal Trail - Rowsley to Darley Dale" (PDF).
- "Derbyshire Dales Narrow Gauge Railway – Peak Rail". www.peakrail.co.uk. Retrieved 17 March 2017.
- British Rail Class 28
- British Rail Class 25
|Wikimedia Commons has media related to Peak Rail.|
- The Peak Rail website
- Today's Railways February 2007 article on Peak Rail, by kind permission of Platform 5 Publishing
- The Peak Rail Volunteering website
- Peak Rail's Signalling Department website
- Friends of the Derwent Valley Line
- County Council Feasibility Study Derbyshire County Council (2004) Derby to Manchester Railway Matlock to Buxton / Chinley Link Study. Main Report, Volume 1A: Version: Final. This report also has detailed plans of the line.
- The Andrew Briddon loco collection