Anderson & Trueman, 2000
The Varroa mite can reproduce only in a honey bee colony. It attaches to the body of the bee and weakens the bee by sucking fat bodies. The species is a vector for at least five debilitating bee viruses, including RNA viruses such as the deformed wing virus (DWV). A significant mite infestation leads to the death of a honey bee colony, usually in the late autumn through early spring. The Varroa mite is the parasite with possibly the most pronounced economic impact on the beekeeping industry. Varroa is considered to be one of multiple stress factors contributing to the higher levels of bee losses around the world.
The adult female mite is reddish-brown in color, while the male is white. Varroa mites are flat, having a button shape. They are 1–1.8 mm long and 1.5–2 mm wide, and have eight legs.
Reproduction, feeding, infection, and hive mortalityEdit
Mites reproduce on a 10-day cycle. The female mite enters a honey bee brood cell. As soon as the cell is capped, the Varroa mite lays eggs on the larva. The young mites, typically several females and one male, hatch in about the same time as the young bee develops and leave the cell with the host. When the young bee emerges from the cell after pupation, the Varroa mites also leave and spread to other bees and larvae. The mite preferentially infests drone cells, allowing the mite to reproduce one more time with the extra three days it takes a drone to emerge vs a worker bee. This can cause genetic defects such as useless wings or viruses and fungi in the bee.
Adult mites suck on the fat body of both adult bees and bee larvae for sustenance. As the fat body is crucial for many bodily functions such as hormone and energy regulation, immunity, and pesticide detoxification, the bee is left in a severely weakened state. Adult mites live and feed under the abdominal plates of adult bees primarily on the underside of the metasoma region on the left side of the bee. Adult mites are more often identified as present in the hive when on top of the adult bee on the mesosoma region, but research suggests that mites in this location are not feeding, but rather attempting to transfer to another bee.
Open wounds left by the feeding become sites for disease and virus infections. The mites are vectors for at least five and possibly up to 18 debilitating bee viruses, including RNA viruses such as the deformed wing virus. With the exception of some resistance in the Russian strains and bees that have Varroa-sensitive hygiene (about 10% of colonies naturally have it), European Apis mellifera bees are almost completely defenseless against these parasites. (Russian honey bees are one-third to one-half less susceptible to mite reproduction).
The model for the population dynamics is exponential growth when bee broods are available, and exponential decline when no brood is available. In 12 weeks, the number of mites in a western honey bee hive can multiply by (roughly) 12. High mite populations in the autumn can cause a crisis when drone rearing ceases and the mites switch to worker larvae, causing a quick population crash and often hive death.
Once infected with a V. destructor mite, the honey bee may be damaged two ways. Firstly, the mite's consumption of the fat body weakens both the adult bee and the larva; in particular, it significantly decreases the weight of both the hatching and adult bee. Additionally, infected adult worker bees have a shorter lifespan than ordinary worker bees, and they furthermore tend to be absent from the colony far more than ordinary bees, which could be due to their reduced ability to navigate or regulate their energy for flight. Secondly, the mites are vectors of various viruses, in particular the deformed wing virus.
After the initial developmental stages, when the young bee matures, it leaves the brood cell and takes the mite with it. V. destructor then leaves the young bee for an older one, preferably for a nurse bee, because nurse bees spend more time near the brood, giving the mite more ample opportunity to reproduce. In fact, because the nurse bee spends more time around the drone brood rather than the worker brood, many more drones are infected with the mites.
Varroa mites have been found on tricial larvae of some wasp species, such as Vespula vulgaris, and flower-feeding insects such as the bumblebee, Bombus pennsylvanicus, the scarab beetle, Phanaeus vindex, and the flower-fly, Palpada vinetorum. It parasitizes the young larvae and feeds on the internal organs of the hosts. Although the Varroa mite cannot reproduce on these insects, its presence on them may be a means by which it spreads short distances (phoresy).
Introduction around the worldEdit
Varroa mites originally only occurred in Asia, on the Asian honeybee, Apis cerana, but this species has been introduced to many other countries on several continents, resulting in disastrous infestations of European honeybees.
- 1909-1958 Japan (first on A. cerana, then on A. mellifera)
- Prior to 1965 USSR (European Russia)
- 1967 Bulgaria
- 1975 Romania
- 1977 West Germany
- 1970s Brazil
- Late 1970s South America
- 1980 Poland
- 1982 France
- 1984 Switzerland, Spain, Italy
- 1987 Portugal
- 1987 United States
- 1989 Canada
- 1992 United Kingdom
- 1998 Ireland
- 2000 New Zealand (North Island)
- 2006 New Zealand (South Island)
- 2007 Hawaii (Oahu, Hawaii Island)
- 2008 Hawaii (Big Island)
As of mid-2012, Australia is thought to be free of the mite. In early 2010, an isolated subspecies of bee was discovered in Kufra (southeastern Libya) that appears to be free of the mite. The Hawaiian islands of Maui, Kauai, Molokai, and Lanai are all free of the mite.
Until recently, V. destructor was thought to be a closely related mite species called Varroa jacobsoni. Both species parasitize the Asian honey bee, A. cerana. However, the species originally described as V. jacobsoni by Anthonie Cornelis Oudemans in 1904 is not the same species that also attacks A. mellifera. The jump to A. mellifera probably first took place in the Philippines in the early 1960s, where imported A. mellifera came into close contact with infected A. cerana. Until 2000, scientists had not identified V. destructor as a separate species. This late identification in 2000 by Anderson and Trueman corrected some previous confusion and mislabeling in the scientific literature.
The infestation and subsequent parasitic disease caused by Varroa mites is called varroosis. Sometimes, the incorrect names varroatosis or varroasis are used. A parasitic disease name must be formed from the taxonomic name of the parasite and the suffix -osis as provided in the Standardised Nomenclature by the World Association for the Advancement of Veterinary Parasitology. For example, the World Organisation for Animal Health (OIE) uses the name varroosis in the OIE Terrestrial Manual.
Treatments have met with limited success. First, the bees were medicated with fluvalinate, a synthetic pyrethroid, which had about 95% mite falls. However, the last 5% became resistant to it, and later, almost immune. Fluvalinate was followed by coumaphos.
Control or preventive measures and treatmentEdit
Several methods exist for monitoring levels of Varroa mites in a colony,. For a powdered sugar roll the sampler collects about 300 bees using a 1/2-cup measuring cup and places them in a jar with a wire mesh screen lid (1/8") along with 2 Tbsp of powdered sugar. They then gently swirl the bees for about a minute before turning the jar upside down and shaking for two minutes over a tray to capture the mites as they fall. Those mites are then counted, and the count is divided by three to find the number of mites per 100 bees. The sugar roll is typically done with the intent to prevent killing the sampled bees, but whether the vigorous shaking causes damage is not known . For an alcohol wash, which is the most effective method, the sampler collects about 300 bees using the same cup. The bees are submerged in alcohol with a concentration of 70% or higher. A lid is placed over the jar to seal it, and the mixture is shaken vigorously for two minutes before it is poured over a 1/8" wire mesh screen into a tray. The mites are then counted, and the resulting number is also divided by three. This method kills all sampled bees. The sticky board method does not kill any bees. For this method, a sticky board with a thick coating of petroleum jelly is placed under the brood chamber under a screened bottom board (or similar 1/8" wire mesh screen). The board is retrieved after three days, and the beekeeper takes a count of the mites on the board. This number is divided by three to find the average 24-hour mite drop. This method does not kill any bees, but takes longer for results.
Varroa mites can be treated with commercially available acaricides. Acaricides must be applied carefully to minimize the contamination of honey that might be consumed by humans. Proper use of miticides also slows the development of resistance by the mites.
- Pyrethroid insecticide (fluvalinate) as strips
- Organophosphate insecticide (Coumaphos or Check-mite) as strips
- Manley's Thymol Crystal and surgical spirit recipe with sugar as food
Naturally occurring chemicalsEdit
- Formic acid as vapor or pads (Mite-Away)
- Powdered sugar (Dowda method), talc, or other "safe" powders with a grain size between 5 and 15 μm (0.20 and 0.59 mils) can be sprinkled on the bees.
- Essential oils, especially lemon, mint, and thyme oil
- Sugar esters (Sucrocide) in spray application
- Oxalic acid trickling method or applied as vapor
- Mineral oil (food grade) as vapor and in direct application on paper or cords
- Natural hops compounds in strip application (Hopguard)
However, the most effective long-term way of protecting bees against V. destructor is by breeding bees that are resistant to these mites.
Physical, mechanical, behavioral methodsEdit
Varroa mites can also be controlled through nonchemical means. Most of these controls are intended to reduce the mite population to a manageable level, not to eliminate the mites completely.
- Perforated bottom board method is used by many beekeepers on their hives. When mites occasionally fall off a bee, they must climb back up to parasitize another bee. If the beehive has a screened floor with mesh the right size, the mite falls through and cannot return to the beehive. The screened bottom board is also being credited with increased circulation of air, which reduces condensation in a hive during the winter. Studies at Cornell University done over two years found that screened bottoms have no measurable effect at all. Screened bottom boards with sticky boards (glue traps) separate mites that fall through the screen and the sticky board prevents them from crawling back up.
- Heating method, first used by beekeepers in Eastern Europe in the 1970s, later became a global method. In this method, hive frames are heated to at least 104 °F (40 °C) for several hours at a time, which causes the mites to drop from the bees. When combined with the perforated bottom board method, this can control mites sufficiently to aid colony survival. In Germany, antivarroa heaters are manufactured for use by professional bee keepers. A thermosolar hive has been patented and manufactured in the Czech Republic.
- Limited drone brood cell method limits the brood space cell for Varroa mites to inhabit (4.9 mm across—about 0.5 mm smaller than standard), and also enhances the difference in size between worker and drone brood, with the intention of making the drone comb traps more effective in trapping Varroa mites. Small cell foundations have staunch advocates, though controlled studies have been generally inconclusive.
- Comb trapping method (also known as the swarming method) is based on interrupting the honey bee brood cycle. It is an advanced method that removes capped brood from the hive, where the Varroa mites breed. The queen is confined to a comb using a comb cage. At 9-day intervals, the queen is confined to a new comb, and the brood in the old comb is left to be reared. The brood in the previous comb, now capped and infested with Varroa mites, is removed. The cycle is repeated. This complex method can remove up to 80% of Varroa mites in the hive.
- Freezing drone brood method takes advantage of the Varroa mites' preference for longer living drone brood. The beekeeper puts a frame in the hive that is sized to encourage the queen to lay primarily drone brood. Once the brood is capped, the beekeeper removes the frame and puts it in the freezer. This kills the Varroa mites feeding on those bees. It also kills the drone brood, but most hives produce an excess of drone bees, so it is not generally considered a loss. After freezing, the frame can be returned to the hive. The nurse bees clean out the dead brood (and dead mites) and the cycle continues.
- Drone brood excision method is a variation applicable to top bar hives. Honey bees tend to place combs suitable for drone brood along the bottom and outer margins of the comb. Cutting this off at a late stage of development ("purple eye stage") and discarding it reduces the mite load on the colony. It also allows for inspection and counting of mites on the brood.
Researchers have been able to use RNA interference to knock out genes in the Varroa mite. Efforts also have been made to breed for changes in the honey bees. Two strains have been developed in the United States that can detect damaged pupae under cappings and remove them before the infestation spreads further. The “IN”/Indiana strain is under development at Purdue University to develop lines that groom off and bite phoretic Varroa to kill the mites.
- vanEngelsdorp, Dennis; Hawthorne, David; Ellis, James D.; Cicero, Joseph M.; Joklik, Judith; Lim, David; Cohen, Allen; Mowery, Joseph D.; Gulbronson, Connor (2019-01-29). "Varroa destructor feeds primarily on honey bee fat body tissue and not hemolymph". Proceedings of the National Academy of Sciences. 116 (5): 1792–1801. doi:10.1073/pnas.1818371116. ISSN 0027-8424. PMC 6358713. PMID 30647116.
- Goulson, D.; Nicholls, E.; Botias, C.; Rotheray, E. L. (26 February 2015). "Bee declines driven by combined stress from parasites, pesticides, and lack of flowers". Science. 347 (6229): 1255957. doi:10.1126/science.1255957. ISSN 0036-8075. PMID 25721506.
- J. Raloff (August 8, 1998). "Russian queens bee-little mites' impact". Science News. Vol. 154 no. 6. p. 84.
- Rosenkranz, P., Aumeier, P. & Ziegelmann, B. (2010) Biology and control of Varroa destructor. Journal of Invertebrate Pathology [online]. 103, S96-S119.
- Peter G. Kevan; Terence M. Laverty & Harold A. Denmark (1990). "Association of Varroa jacobsoni with organisms other than honeybees and implications for its dispersal". Bee World. 71 (3): 119–121. doi:10.1080/0005772X.1990.11099048.
- Invasion Biology Introduction: Varroa mites University of Columbia. Accessed 26 April 2017
- L. Bailey and B.V. Ball (1991). Honey Bee Pathology (2nd ed.). Harcourt Brace Jovanovich. p. 97. ISBN 978-0120734818. Retrieved 19 February 2020.
- Pinto, F.A.; Puker, A.; Barreto, L.M.R.C.; Message, D. (October 2012). "The ectoparasite mite Varroa destructor Anderson and Trueman in southeastern Brazil apiaries: effects of the hygienic behavior of Africanized honey bees on infestation rates". Arquivo Brasileiro de Medicina Veterinária e Zootecnia. 64 (5): 1194–1199. doi:10.1590/S0102-09352012000500017.
- Helen M. Thompson; Michael A. Brown; Richard F. Ball & Medwin H. Bew (2002). "First report of Varroa destructor resistance to pyrethroids in the UK" (PDF). Apidologie. 33 (4): 357–366. doi:10.1051/apido:2002027.
- McMullan, John (2018). "Adaptation in Honey Bee (Apis mellifera) Colonies Exhibiting Tolerance to Varroa destructor in Ireland". Bee World. 95 (2): 39–43. doi:10.1080/0005772X.2018.1431000.
- "Varroa Mite, Varroa destructor". MAF Biosecurity New Zealand. June 30, 2009. Retrieved February 24, 2011.
- Nina Wu (April 25, 2007). "Bee mites have spread on Oahu". Honolulu Star-Bulletin. Retrieved February 24, 2011.
- "Varroa Mite Information". State of Hawaii. 2013. Retrieved December 9, 2013.
- Holland, Malcolm (June 26, 2012). "Varroa mites could devastate our honeybee industry". The Sydney Morning Herald. Retrieved June 26, 2012.
- Jopson, Debra (August 18, 2010). "It's a bee nuisance – and food growers are more than a mite scared". The Sydney Morning Herald. Retrieved June 20, 2012.
- "Honigbienenart in der Sahara entdeckt" [Honey bee species discovered in the Sahara]. Die Zeit (in German). July 2010. Retrieved February 24, 2011.
- D. L. Anderson & J. W. H. Trueman (2000). "Varroa jacobsoni (Acari: Varroidae) is more than one species". Experimental and Applied Acarology. 24 (3): 165–189. doi:10.1023/A:1006456720416. PMID 11108385.
- Kassai T., 2006, Nomenclature for parasitic diseases: cohabitation with inconsistency for how long and why?, Veterinary Parasitology, 138, 169–178, http://www.waavp.org/files/Nomenclature%20for%20parasitic%20diseases.pdf Archived 2014-03-04 at the Wayback Machine
- "Archived copy". Archived from the original on 2014-03-04. Retrieved 2014-03-04.CS1 maint: archived copy as title (link)
- "Varroa mites: A step-by-step guide to monitoring in New York" (PDF). Pollinator Network at Cornell University.
- Milbrath, Meghan (January 2018). "Varroa Mite Monitoring: Using a Sugar Roll to Quantify Infestation of Varroa Destructor in Honey Bee Colonies". Michigan Pollinator Initiative, Michigan State University.
- Mark Ward (March 8, 2006). "Almond farmers seek healthy bees". BBC News. Retrieved May 2, 2009.
- Natalia Damiani; Liesel B. Gende; Pedro Bailac; Jorge A. Marcangeli & Martín J. Eguaras (2009). "Acaricidal and insecticidal activity of essential oils on Varroa destructor (Acari: Varroidae) and Apis mellifera (Hymenoptera: Apidae)". Parasitology Research. 106 (1): 145–152. doi:10.1007/s00436-009-1639-y. PMID 19795133.
- Northeast Beekeeper Vol 1 #1 Jan 2004)
- John R. Harbo (2000). "Heating Adult Honey Bees to Remove Varroa jacobsoni" (PDF). Journal of Apicultural Research. 39 (3–4): 181–183. doi:10.1080/00218839.2000.11101041.
- "Czech teacher battles bee-killing disease with hot hive". Reuters. 28 May 2017.
- US application 2014134920
- Growth and good progress in 2017
- "A Sustainable Approach to Controlling Honey Bee Diseases and Varroa Mites". SARE. Retrieved 2008-11-18.
- Victoria Gill (December 22, 2010). "Genetic weapon developed against honeybee-killer". BBC News. Retrieved February 24, 2011.
- Hunt, Greg; Given, J Krispn; Tsuruda, Jennifer M.; Andino, Gladys K. (April 2016). "Breeding Mite-Biting Bees to Control Varroa" (PDF). Bee Culture.CS1 maint: multiple names: authors list (link)
- Hunt, Greg; Given, J Krispn; Tsuruda, Jennifer M.; Andino, Gladys K. (March 23, 2016). "Breeding Mite-Biting Bees to Control Varroa". Retrieved February 23, 2018.CS1 maint: multiple names: authors list (link)
- Zhi-Qiang Zhang (2000). "Notes on Varroa destructor (Acari: Varroidae) parasitic on honeybees in New Zealand" (PDF). Systematic & Applied Acarology. Special Publications. 5: 9–14.
- Keith S. Delaplane (2001). "Varroa destructor: revolution in the making". Bee World. 82 (4): 157–159. doi:10.1080/0005772X.2001.11099522. Archived from the original on 2010-06-10.
- "Managing Varroa". Ministry of Agriculture, Fisheries and Food. 2005.
- Varroa Mite Controls Apiculture Factsheet #221, Ministry of Agriculture, Food and Fisheries, Government of British Columbia; April 2004
- Oils for Varroa Control Botanicals For Mite Control, Canadian Honey Council, 3/16/2003
|Wikispecies has information related to Varroa destructor|
|Wikimedia Commons has media related to Varroa destructor.|