SorryForN00b (talk) 17:03, 18 August 2010 (UTC)Reply

Facepunch

edit

on the Facepunch Studios, what is the importantce of the company? this is also a serious problem with the article.--intelati 22:02, 18 August 2010 (UTC)Reply

They created a very popular mod for the half life 2 series named Garry's Mod as well as two other pieces of software. But the major thing is the own and run the Facepunch Forums which is a very big online community, and I thought the point of Wikipedia was to be a resource of that kind of information... SorryForN00b (talk) 22:06, 18 August 2010 (UTC)Reply
I think I modified the article enough to survive a little longer, but it still needs help to expand. Thanks--intelati 22:12, 18 August 2010 (UTC)Reply
Thanks, I can now see the sort of issue you mean. I will edit it tomorrow some more SorryForN00b (talk) 22:19, 18 August 2010 (UTC)Reply
I added the page to my watchlist. so I'll comment or change anything that needs help. --intelati 06:00, 19 August 2010 (UTC)Reply

License tagging for File:Facepunch Studios Entrance.jpg

edit

Thanks for uploading File:Facepunch Studios Entrance.jpg. You don't seem to have indicated the license status of the image. Wikipedia uses a set of image copyright tags to indicate this information; to add a tag to the image, select the appropriate tag from this list, click on this link, then click "Edit this page" and add the tag to the image's description. If there doesn't seem to be a suitable tag, the image is probably not appropriate for use on Wikipedia.

For help in choosing the correct tag, or for any other questions, leave a message on Wikipedia:Media copyright questions. Thank you for your cooperation. --ImageTaggingBot (talk) 22:07, 18 August 2010 (UTC)Reply


Articles for deletion nomination of Facepunch Studios

edit

I have nominated Facepunch Studios, an article that you created, for deletion. I do not think that this article satisfies Wikipedia's criteria for inclusion, and have explained why at Wikipedia:Articles for deletion/Facepunch Studios (2nd nomination). Your opinions on the matter are welcome at that same discussion page; also, you are welcome to edit the article to address these concerns. Thank you for your time.

Please contact me if you're unsure why you received this message. Codf1977 (talk) 16:39, 19 August 2010 (UTC)Reply

Speedy deletion nomination of Facepunch Studios

edit
 

A tag has been placed on Facepunch Studios, requesting that it be speedily deleted from Wikipedia. This has been done under section G4 of the criteria for speedy deletion, because the article appears to be a repost of material that was previously deleted following a deletion debate, such as at articles for deletion. Under the specified criteria, where an article has substantially identical content to that of an article deleted after debate, and any changes in the content do not address the reasons for which the material was previously deleted, it may be deleted at any time.

If you think that this notice was placed here in error, you may contest the deletion by adding {{hangon}} to the top of the page that has been nominated for deletion (just below the existing speedy deletion or "db" tag - if no such tag exists then the page is no longer a speedy delete candidate and adding a hangon tag is unnecessary), coupled with adding a note on the talk page explaining your position, but be aware that once tagged for speedy deletion, if the page meets the criterion, it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the page that would render it more in conformance with Wikipedia's policies and guidelines. Lastly, please note that if the page does get deleted, you can contact one of these admins to request that they userfy the page or have a copy emailed to you. Codf1977 (talk) 16:41, 19 August 2010 (UTC)Reply

Orphaned non-free image File:Facepunch Studios Logo.png

edit
 

Thanks for uploading File:Facepunch Studios Logo.png. The image description page currently specifies that the image is non-free and may only be used on Wikipedia under a claim of fair use. However, the image is currently orphaned, meaning that it is not used in any articles on Wikipedia. If the image was previously in an article, please go to the article and see why it was removed. You may add it back if you think that that will be useful. However, please note that images for which a replacement could be created are not acceptable for use on Wikipedia (see our policy for non-free media).

PLEASE NOTE:

  • I am a bot, and will therefore not be able to answer your questions.
  • I will remove the request for deletion if the file is used in an article once again.
  • If you receive this notice after the image is deleted, and you want to restore the image, click here to file an un-delete request.
  • To opt out of these bot messages, add {{bots|deny=DASHBot}} to your talk page.
  • If you believe the bot has made an error, please turn it off here and leave a message on my owner's talk page.


Thank you. DASHBot (talk) 05:24, 27 August 2010 (UTC)Reply

Orphaned non-free image File:Facepunch Studios Entrance.jpg

edit
 

Thanks for uploading File:Facepunch Studios Entrance.jpg. The image description page currently specifies that the image is non-free and may only be used on Wikipedia under a claim of fair use. However, the image is currently orphaned, meaning that it is not used in any articles on Wikipedia. If the image was previously in an article, please go to the article and see why it was removed. You may add it back if you think that that will be useful. However, please note that images for which a replacement could be created are not acceptable for use on Wikipedia (see our policy for non-free media).

PLEASE NOTE:

  • I am a bot, and will therefore not be able to answer your questions.
  • I will remove the request for deletion if the file is used in an article once again.
  • If you receive this notice after the image is deleted, and you want to restore the image, click here to file an un-delete request.
  • To opt out of these bot messages, add {{bots|deny=DASHBot}} to your talk page.
  • If you believe the bot has made an error, please turn it off here and leave a message on my owner's talk page.


Thank you. DASHBot (talk) 05:27, 27 August 2010 (UTC)Reply

edit
 
File Copyright problem

Thanks for uploading File:Pagename explanation2.png. I noticed that the file's description page currently doesn't specify who created the content, so the copyright status is unclear. If you did not create this file yourself, you will need to specify the owner of the copyright. If you obtained it from a website, then a link to the website from which it was taken, together with a restatement of that website's terms of use of its content, is usually sufficient information. However, if the copyright holder is different from the website's publisher, their copyright should also be acknowledged.

As well as adding the source, we also need to know the terms of the license that the copyright holder has published the file under, usually done by adding a licensing tag. If you created/took the picture, audio, or video then the {{GFDL-self}} tag can be used to release it under the GFDL. If you believe the media meets the criteria at Wikipedia:Non-free content, use a tag such as {{non-free fair use in|article name}} or one of the other tags listed at Wikipedia:Image copyright tags#Fair use. See Wikipedia:Image copyright tags for the full list of copyright tags that you can use.

If you have uploaded other files, consider checking that you have specified their source and tagged them, too. You can find a list of files you have created in your upload log. Unsourced and untagged files may be deleted one week after they have been tagged, as described on criteria for speedy deletion. If the file is copyrighted under a non-free license (per Wikipedia:Fair use) then the file will be deleted 48 hours after 14:41, 25 September 2010 (UTC). If you have any questions please ask them at the Media copyright questions page. Thank you. Sfan00 IMG (talk) 14:41, 25 September 2010 (UTC)Reply