Welcome!

edit

Hello, Janlepkowski, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are a few links to pages you might find helpful:

Please remember to sign your messages on talk pages by typing four tildes (~~~~); this will automatically insert your username and the date. If you need help, check out Wikipedia:Questions, ask me on my talk page, or ask your question on this page and then place {{Help me}} before the question. Again, welcome! Fiddle Faddle 08:36, 11 June 2014 (UTC)Reply

Powerflush A powerflush is the process of cleaning wet central heating systems in domestic and commercial properties.

Background Over time, all central heating systems suffer corrosion and the resulting buildup of contaminants. A powerflush pump is attached to the heating system and is used to pump water and chemicals around the system to remove contaminants and debris from the boiler, radiators and connecting pipework.

Contaminants and Debris Radiators in wet central heating systems are subject to corrosion caused by the presence of oxygen in the system water. The internal surfaces of the radiators rust and produce black iron oxide. Black iron oxide may be found suspended in the system water, or it may be lying as a sediment at the bottom of radiators or pipework. Black iron oxide is the most common contaminant in heating systems and it is commonly referred to as sludge.

Corrosion may also be caused by electrolysis, an electro mechanical reaction between dissimilar metals in close proximity within the system, such as between radiators (iron) and the radiator valves (brass alloy).

Some systems my have contaminated water. The wrong chemicals may have been used in the past or for some reason the acidity pH levels of the water my be incorrect. This can also cause corrosion in the system.

Other debris that a powerflush can remove from a heating system include builders sand, brick dust, sawdust, flux, solder, jointing compounds, insulation materials, etc.,

Damage caused by Debris and Contaminants The build up of black iron oxide in central heating systems, often called sludging-up, will result in the heating system becoming inefficient as the water is unable to circulate freely. Pipework can become blocked or partially blocked resulting in poor distribution of heat throughout the heating system.

Black iron oxide is abrasive and it is tacky and will stick to components in the system causing them to fail. Typical components that fail include circulation pump, diverter valves, pressure relief valves, expansion vessel, main heat exchangers and radiator valves.

Powerflush Process (Summary)

A powerflushing pump is attached to the heating system at the engineers choice. This could be on the tails of a removed radiator, the heating circulation pump, or the system pipework at the boiler. The engineer will determine the best location depending on the system design.

The powerflush pump will be used to established water flow throughout the system. Powerflush chemicals will be added via the powerflush pump and flushed throughout the system and the boiler may be activated to heat the system thus promoting chemical action.

Once chemicals have been flushed throughout the system, all radiators valves are shut off except for one radiator. This radiator is then cleaned. Once clean, it is shut off and the next radiator is opened and it is then cleaned. All radiators are thus individually powerflushed until the entire system is clean.

On completion of the powerflush a corrosion inhibitor is added to ensure that future corrosion is kept to a minimum. Notwithstanding, all systems will corrode to some degree, so regular water testing and treatment is recommended.

A detailed step by step guid to a powerflush may be found on powerflush pump manufacturer’s product user guides.

Powerflushing Accessories There are a variety of accessories to assist in a powerflush including equipment to vibrate on radiator panels, powerful magnets to trap contaminants, and electronic devices to test radiator temperatures. Water testing equipment is also available to test the water quality before, during and after a powerflush.

Powerflush People The success of each powerflush will be ultimately determined by the knowledge and experience of the person performing the powerflush. A number of independent specialist specialist providers of powerflush services are in existence. Any competent heating engineer with knowledge of vented, sealed, combi boiler, microbore, gravity hot water, single-pipe, single-feed cylinders and thermal store systems can undertake a powerflush.

Regulation In the UK powerflushing is not a regulated activity. It is not a requirement that the person performing a powerflush is Gas Safe registered.

Author - Jan Lepkowski - Southern Power Flushing[1][2] Janlepkowski (talk) 09:44, 10 June 2014 (UTC)Reply

Your submission at Articles for creation: Draft:Power flush (heating systems) (June 11)

edit
 
Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time.
Please read the comments left by the reviewer on your submission. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

.

Thank you for your
contributions to Wikipedia!
  • Please remember to link to the submission!
Fiddle Faddle 08:34, 11 June 2014 (UTC)Reply


 
Hello! Janlepkowski, I noticed your article was declined at Articles for Creation, and that can be disappointing. If you are wondering or curious about why your article submission was declined please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there!


Talkback

edit
 
Hello, Janlepkowski. You have new messages at Timtrent's talk page.
Message added 09:22, 11 June 2014 (UTC). You can remove this notice at any time by removing the {{Talkback}} or {{Tb}} template.Reply

Fiddle Faddle 09:22, 11 June 2014 (UTC)Reply

Your submission at Articles for creation: Draft:Power flush (heating systems) (June 17)

edit
 
Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time.
Please read the comments left by the reviewer on your submission. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

.

Thank you for your
contributions to Wikipedia!
  • Please remember to link to the submission!
j⚛e deckertalk 00:54, 17 June 2014 (UTC)Reply

Reference Errors on 4 July

edit

  Hello, I'm ReferenceBot. I have automatically detected that an edit performed by you may have introduced errors in referencing. It is as follows:

Please check this page and fix the errors highlighted. If you think this is a false positive, you can report it to my operator. Thanks, ReferenceBot (talk) 00:33, 5 July 2014 (UTC)Reply

Your submission at Articles for creation: Power flush (heating systems) (November 1)

edit
 
Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved. Hell in a Bucket (talk) 08:50, 1 November 2014 (UTC)Reply

Your submission at Articles for creation: Power flush (heating systems) (February 19)

edit
 
Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Mcmatter was: Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved. - McMatter (talk)/(contrib) 02:10, 19 February 2015 (UTC)Reply

Draft:Power flush (heating systems) concern

edit

Hi there, I'm HasteurBot. I just wanted to let you know that Draft:Power flush (heating systems), a page you created, has not been edited in 6 months. The Articles for Creation space is not an indefinite storage location for content that is not appropriate for articlespace.

If your submission is not edited soon, it could be nominated for deletion. If you would like to attempt to save it, you will need to improve it.

You may request Userfication of the content if it meets requirements.

If the deletion has already occured, instructions on how you may be able to retrieve it are available at WP:REFUND/G13.

Thank you for your attention. HasteurBot (talk) 01:31, 20 August 2015 (UTC)Reply

Your draft article, Draft:Power flush (heating systems)

edit
 

Hello, Janlepkowski. It has been over six months since you last edited your WP:AFC draft article submission, entitled "Power flush".

The page will shortly be deleted. If you plan on editing the page to address the issues raised when it was declined and resubmit it, simply edit the submission and remove the {{db-afc}} or {{db-g13}} code. Please note that Articles for Creation is not for indefinite hosting of material deemed unsuitable for the encyclopedia mainspace.

If your submission has already been deleted by the time you get there, and you want to retrieve it, you can request its undeletion by following the instructions at WP:REFUND/G13. An administrator will in most cases undelete the submission.

Thanks for your submission to Wikipedia, and happy editing. JMHamo (talk) 21:22, 16 September 2015 (UTC)Reply

Proposed deletion of File:Flushing contaminants down toilet.jpg

edit
 

The file File:Flushing contaminants down toilet.jpg has been proposed for deletion because of the following concern:

Unused free use image with no clear use on the Wiki.

While all constructive contributions to Wikipedia are appreciated, pages may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{proposed deletion/dated files}} notice, but please explain why in your edit summary or on the file's talk page.

Please consider addressing the issues raised. Removing {{proposed deletion/dated files}} will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and files for discussion allows discussion to reach consensus for deletion. fuzzy510 (talk) 01:47, 17 September 2020 (UTC)Reply

  1. ^ www.southernpowerflushing.co.uk
  2. ^ www.kamco.co.uk