ALS162 time signal

(Redirected from TDF time signal)

ALS162 is a French longwave time signal and standard-frequency radio station and is used for the dissemination of the Metropolitan French national legal time to the public. TéléDiffusion de France broadcast the ALS162 time signal, provided by LNE-SYRTE[1] and LNE-LTFB time laboratories under ANFR (state body for radio frequencies) responsibility, from the Allouis longwave transmitter at 162 kHz, with a power of 800 kW.[2]

TDF ALS162 time code transmitter
The 350 m tall low frequency antennas of ALS162 time signal in Allouis
LocationAllouis longwave transmitter, Allouis, France
Coordinates47°10′10″N 2°12′17″E / 47.1695°N 2.2046°E / 47.1695; 2.2046
Elevation129 m (423 ft)
OperatorTéléDiffusion de France on behalf of the ANFR and LNE–SYRTE
Frequency162 kHz
Power800 kW
Began operationJuly 1980
Official range3,500 km (2,175 mi)

The current time signal is generated by extremely accurate caesium atomic clocks and phase-modulated on the 162 kHz (1850.5707284 m wavelength) carrier signal in a way that is inaudible when listening to the signal using normal Longwave receivers. The ALS162 phase-modulated time signal service requires a more complex receiver than the popular German DCF77 amplitude-modulated time signal service, but the much more powerful transmitter (16 times DCF77's 50 kW) gives it a much greater range of 3,500 km.

The signal transmission is almost continuous, but there is a regularly scheduled interruption for maintenance and tests every Tuesday from 08:00 to 12:00.[3]

The transmitter building contains two caesium atomic clocks which are used to generate the time signal and which are monitored through the SYREF system and GPS common-view measurements, to align with the official French UTC(OP) time scale. The ALS162 time signal exactitude should be in excess of 1 millisecond uncertainty.[4] The monitoring of the ALS162 signal is jointly conducted by LNE-SYRTE, LNE-LTFB and the trade body France Horlogerie and measurement results are published in real time.[1] Monthly monitoring bulletins, like H 649 of the ALS162 signal regarding January 2022 measurements, show if the exactitude goals were met.[5] The time signal is critical for over 300,000 devices (clocks in public places, information panels, traffic lights, public lighting, parking meters, etc.) deployed within French enterprises and state entities, such as French Railways (SNCF), electricity distributor Enedis, airports, hospitals, municipalities, etc. which depend on the signal in France and abroad.[6][1][7]

History

edit

Call sign

edit

The transmitter was previously known as TDF, FI or France Inter because the signal was formerly best known for radio broadcasting the France Inter AM signal. The transmission of audio (sound) signal ceased at the end of 2016, but the Allouis transmitter remains in use for the dissemination of the time signal and other digital signals.[7][8][9] As of 2017 the transmitter has been renamed to ALS162. The call sign ALS162 stands for ALS = Allouis transmitter, 162 = frequency: 162 kHz.[9]

Technical evolution

edit

In 1977, the current phase-modulated time signal was added to the transmissions. The broadcast frequency, formerly 164 kHz, was changed to 163.840 kHz (the 5th harmonic of the common 32,768 Hz timekeeping frequency used by most quartz clocks) to be a more convenient frequency standard.[10]

In 1980, the first atomic clock was installed to regulate the carrier frequency.[10]

On 1 February 1986, the frequency was changed to its current value of 162 kHz (still an accurately controlled frequency standard) to bring it to a multiple of 9 kHz in accordance with the Geneva Frequency Plan of 1975.

Before 2017 the period used for scheduled signal interruptions for maintenance and tests was on Tuesday from 01:03 to 05:00.[10]

Power output

edit

The signal was formerly 1,000 kW and increased to 2,000 kW in 1981, but has been reduced to 1,500 kW in 2011, 1,100 kW in 2017 and subsequently to 800 kW in February 2020 for cost savings.[2][11][12][13]

Signal format

edit

TéléDiffusion de France (TDF) uses an amplitude modulated longwave transmitter station. Time signals are transmitted by phase-modulating the carrier by ±1 radian in 0.1 s every second except the 59th second of each minute. This modulation pattern is repeated to indicate a binary one.

The binary encoding of date and time data during seconds 15 through 18 and 20 through 59 is identical to that of DCF77; the numbers of the minute, hour, day of the month, day of the week, month and year are transmitted each minute from the 21st to the 58th second, in accordance with the French legal time scale. The time transmitted is the local time of the upcoming minute.

Also like DCF77, bit 20 is always 1, bit 18 indicates that local time is UTC+1 (CET), bit 17 indicates that local time is UTC+2 (CEST), and bit 16 indicates that a change to local time will take place at the end of the current hour. Bit 15 is reserved to indicate abnormal transmitter operation.

As extensions to the DCF77 code, bit 14 is set during public holidays (14 July, Christmas, etc.), and bit 13 is set the day before public holidays.[14]

Bits 7–12 are unused and always transmitted as 0.

Bits 3 through 6 provide additional error checking; they encode the total number of bits set (the Hamming weight of) bits 21 through 58. Because this includes the even parity bits, the sum is always even. Also, although there are 38 bits in that range, they may not all be set. The possible values are even numbers from 4 (on Tuesday 2000-01-04 at 00:00) through 24 (on Sunday 2177-07-27 at 17:37).

Unlike DCF77, bit 19 is not used for leap second warnings, but is always zero. Instead, bit 1 is used to warn of a positive leap second at the end of the current hour,[15] and bit 2 is used to warn of a (very unlikely) negative leap second.[16] In case of a leap second, an additional zero bit is inserted between bits 2 and 3. This is supposed to be inserted at 23:59:03, during minute 59 of the hour (during which the timestamp for minute :00 is transmitted), so that the minute markers are all broadcast at the correct times, but for the leap second at the end of December 2016, it was apparently inserted at 23:58:03.[16]

The ALS162 transmitted carrier frequency relative uncertainty is 2 × 10−12 over a 24-hour period and 1 × 10−13 over 30 days.[5]

ALS162 time code
Bit Weight Meaning Bit Weight Meaning Bit Weight Meaning
:00 M Start of minute, always 0. :20 S Start of encoded time, always 1. :40 10 Day of month (continued)
:01 A2 Positive leap second warning,
set during previous hour[15]
:21 1 Minutes
00–59
:41 20
:02 A3 Negative leap second warning,
set during previous hour[15]
:22 2 :42 1 Day of week
Monday=1, Sunday=7
:03 2 Hamming weight (number
of 1 bits) of bits 21–58[15]
(always even)
:23 4 :43 2
:04 4 :24 8 :44 4
:05 8 :25 10 :45 1 Month number
01–12
:06 16 :26 20 :46 2
:07 0 Unused, always 0 :27 40 :47 4
:08 0 :28 P1 Even parity over minute bits 21–28. :48 8
:09 0 :29 1 Hours
0–23
:49 10
:10 0 :30 2 :50 1 Year within century
00–99
:11 0 :31 4 :51 2
:12 0 :32 8 :52 4
:13 F1 Following day is a public holiday. :33 10 :53 8
:14 F2 Current day is a public holiday. :34 20 :54 10
:15 0 To be ignored.[16][15] :35 P2 Even parity over hour bits 29–35. :55 20
:16 A1 Summer time announcement.
Set during hour before change.
:36 1 Day of month.
01–31
:56 40
:17 Z1 Set to 1 when CEST is in effect. :37 2 :57 80
:18 Z2 Set to 1 when CET is in effect. :38 4 :58 P3 Even parity over date bits 36–58.
:19 0 Unused, always 0 :39 8 :59 No bit transmitted during last second of each minute.

Phase modulation pattern

edit

One signal element consists of the phase of the carrier shifted linearly by +1 rad in 25 ms (known as "ramp A"), then shifted linearly by −2 rad over 50 ms ("ramp B"), then shifted linearly again by +1 rad for another 25 ms ("ramp C"), returning the phase to zero. One signal element is always sent at each second between 0 and 58. Two signal elements are sent in sequence to represent a binary one; otherwise it is interpreted as binary zero. During ramp B of the initial signal element, the exact point the signal phase is at zero represents the top of the UTC second. Since the phase is the integral of the frequency, this triangular phase modulation at 40 rad/s corresponds to a square frequency modulation with a deviation of 20/π ≈ 6.37 Hz.

 
Both the average phase and the average frequency deviation are thus zero. Additional non-timing data is sent by phase modulation during the rest of each second. But the second marker (and data bit) is always preceded by 100 ms without any phase modulation. The signal is not phase-modulated at all during the 59th second past the minute.

See also

edit

References

edit
  1. ^ a b c Provision of the legal time by ALS162 signal
  2. ^ a b ANFR website
  3. ^ "Les tests du signal horaire" [The tests of the time signal] (in French). Agence Nationale des Fréquences. Retrieved 2017-03-16.
  4. ^ LNE-SYRTE ATTESTATION Exactitude du signal ALS162 (in French)
  5. ^ a b Observatoire de Paris LNE-SYRTE, Bulletin H 649, janvier 2022, 1.2 Mesure de la porteuse et mesure de temps du signal ALS162 (in French)
  6. ^ (in French)L'émetteur d'Allouis passe aussi à l'heure d'été cette nuit
  7. ^ a b Brulhatour (21 December 2016). "Le signal horaire restera sur le 162 kHz de France Inter". La Lettre (in French). Editions HF. Retrieved 14 January 2020.
  8. ^ Silence on 162 kHz Pieter-Tjerk de Boer, PA3FWM
  9. ^ a b France Inter Longwave 162 kHz Final (Audio) Sign-off: December 31, 2016
  10. ^ a b c (in French)Les ré-orientations
  11. ^ TDF 162 kHz power test, November 2019 Pieter-Tjerk de Boer, PA3FWM
  12. ^ TDF 162 kHz antenna test, February 2020 Pieter-Tjerk de Boer, PA3FWM
  13. ^ "La gestion de la diffusion du Signal horaire évolue !". Agence nationale des fréquences. February 27, 2020. Archived from the original on January 25, 2021. Retrieved March 27, 2022.
  14. ^ Time signals known to BIPM
  15. ^ a b c d e ANFR time signal (in Spanish), updated time data description
  16. ^ a b c Fuste, Emmanuel (31 January 2017). "Radio signals during a leap second". Retrieved 9 March 2017. Thanks to people at Agence Nationale des Fréquences (ANFR) and Chambre française de l'horlogerie et des microtechniques (CFHM) I got a copy of Norme Française NF C 90-002 from August 1988, describing the format of the TDF time signal. The leap second announcement bits are in fact the 2nd (for positive leapsecond) and 3rd (for negative) bits in the minute. The positive leap second is to be inserted by inserting an extra 0 bit after the 3rd bit of the last minute of the hour.

Sources

edit