Audio signal

representation of sound, typically as an electrical voltage

An audio signal is a representation of sound, typically as an electrical voltage. Audio signals have frequencies in the audio frequency range of roughly 20 to 20,000 Hz (the limits of human hearing). Audio signals may be synthesized directly, or may originate at a transducer such as a microphone, musical instrument pickup, phonograph cartridge, or tape head. Loudspeakers or headphones convert an electrical audio signal into sound. Digital representations of audio signals exist in a variety of formats.[1]

An audio channel or audio track is an audio signal communications channel in a storage device, used in operations such as multi-track recording and sound reinforcement.


Signal flowEdit

Signal flow is the path an audio signal will take from source (microphone) to the speaker or recording device. It is most frequently in a recording studio setting, where the signal flow is often very long and convoluted as the electric signal may pass through many sections of a large analog console, external audio equipment, and even different rooms.


Audio signals may be characterized by parameters such as their bandwidth, power level in decibels (dB), and voltage level. The relation between power and voltage is determined by the impedance of the signal path, which may be single-ended or balanced.

Audio signals have somewhat standardized levels depending on application. Outputs of professional mixing consoles are most commonly at line level. Microphones generally output at a lower level, commonly referred to a "mic level". Consumer audio equipment will also output at a lower level.

Digital equivalentEdit

As much of the older analog audio equipment has been emulated in digital form, usually through the development of audio plug-ins for digital audio workstation (DAW) software, the path of digital information through the DAW (i.e. from an audio track through a plug-in and out a hardware output) is also called an audio signal or signal flow.

A digital audio signal being sent through wire can use several formats including optical (ADAT, TDIF), coaxial (S/PDIF), XLR (AES/EBU), and Ethernet.

See alsoEdit


  1. ^ Hodgson, Jay (2010). Understanding Records, p.1. ISBN 978-1-4411-5607-5.

External linksEdit