This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
The Kyoto Municipal Subway 10 series (京都市交通局10系電車), is an electric multiple unit (EMU) commuter train type operated by the Kyoto Municipal Subway in Kyoto, Japan, since 1981.
| Kyoto Municipal Subway 10 series | |
|---|---|
 Two 10 series trains with differences between the 6th batch (left) and 1st batch (right) | |
| In service | 1981–present |
| Manufacturer | Kinki Sharyo |
| Number built | 120 vehicles (20 sets)[1] |
| Number in service | 114 vehicles (19 sets) |
| Number scrapped | 6 vehicles (1 set) |
| Successor | 20 series |
| Formation | 6 cars per trainset |
| Fleet numbers | 1x01–1x20 |
| Capacity |
|
| Operators |  Kyoto Municipal Subway |
| Lines served | |
| Specifications | |
| Car body construction | Aluminum alloy |
| Car length | 20,500 mm (67 ft 3 in) |
| Width | 2,872 mm (9 ft 5.1 in) |
| Height | 4,040 mm (13 ft 3 in) |
| Doors | 4 pairs per side |
| Maximum speed | 105 km/h (65 mph) |
| Acceleration | 3.3 km/(h⋅s) (2.1 mph/s) |
| Deceleration | 3.5 km/(h⋅s) (2.2 mph/s) |
| Electric system(s) | 1,500 V DC overhead line |
| Current collector(s) | Pantograph |
| UIC classification | Bo′Bo′+Bo′Bo′+2′2′+2′2′+Bo′Bo′+Bo′Bo′ |
| Track gauge | 1,435 mm (4 ft 8+1⁄2 in) standard gauge |
Overview edit
The 10 series was introduced in 1981 with nine four-car sets built to coincide with the opening of the Karasuma Line between Kyoto and Kitaoji stations.[2] By 1997, the line was extended south to Takeda Station and north to Kokusaikaikan Station. These extensions were accompanied by an additional 84 cars spread over five batches.[1]
Formations edit
Four-car sets edit
Nine four car sets were introduced for the opening of the initial section on the Karasuma Line between Kyōto Station and Kitaōji Station in May 1981.[2]
| Designation | Mc2' | M1' | M1 | Mc2 |
|---|---|---|---|---|
| Numbering | 18xx | 17xx | 12xx | 11xx |
Six-car sets edit
Starting from the third batch in 1988, all trains were lengthened to six-car trains. This was done to supplement the opening of an extension between Kyoto Station and Takeda Station.[3]
| Designation | Mc2' | M1' | T2 | T1 | M1 | Mc2 |
|---|---|---|---|---|---|---|
| Numbering | 18xx | 17xx | 16xx | 13xx | 12xx | 11xx |
-
Original model trainset -
Updated model trainset starting from the third batch
Interior edit
The interior consists of longitudinal seating throughout.
-
Interior view -
Priority seating area after refurbishment -
LCD screens installed after refurbishment
Disposal edit
Set 1806 was scrapped in 2020.[4] The remaining eight earlier-batch sets are set to undergo replacement as newer Kyoto Municipal Subway 20 series trains enter service.[5]
References edit
- ^ a b 私鉄車両編成表 [Private railway vehicle organization table] (in Japanese). Japan: Kotsu Shimbun. 2012. ISBN 978-4330299112.
- ^ a b 竹田, 昭三 (September 1981). "京都市営地下鉄烏丸線の概要" [Overview of Kyoto Municipal Subway Karasuma Line]. Railway Pictorial (in Japanese). 394.
- ^ 藤井, 信夫 (May 1989). "各社別車両情勢" [Vehicle situation by each company]. Railway Pictorial (in Japanese). 512: 142.
- ^ "地下鉄烏丸線車両廃車処理業務仕様書" [Subway Karasuma Line vehicle scrap disposal business specification] (PDF). Kyoto Municipal Transportation Bureau Rapid Transit department Railway Vehicle Division (in Japanese). 2020. Archived from the original (PDF) on 17 December 2020. Retrieved 19 March 2022.
- ^ "京都市交烏丸線20系，3月26日から営業運転を開始" [Kyoto City Subway Karasuma Line 20 series, commercial operation started from March 26]. Japan Railfan Magazine Online (in Japanese). 1 March 2022. Archived from the original on 3 March 2022. Retrieved 19 March 2022.
External links edit
