Homebrewing is the brewing of beer or other alcoholic beverages on a small scale for personal, non-commercial purposes. Supplies, such as kits and fermentation tanks, can be purchased locally at specialty stores or online. Beer was brewed domestically for thousands of years before its commercial production, although its legality has varied according to local regulation. Homebrewing is closely related to the hobby of home distillation, the production of alcoholic spirits for personal consumption; however home distillation is generally more tightly regulated.
Beer has been brewed domestically throughout its 7,000-year history, beginning in the Neolithic period in Mesopotamia (modern Iraq), Egypt and China. It seems to have first developed as thick beers; during this time meads, fruit wines and rice wines were also developed.
Women brewers dominated alcohol production on every occupied continent until commercialization and industrialization of brewing occurred. The tradition of brewing being in the domain of women stemmed from the fact that brewing was a by-product of gathering, and often considered a part of baking.
By the Tang dynasty, homebrewing seems to have been a familiar domestic chore in China, albeit the lower classes had to make do with poorly-filtered mash. Laws against making alcohol were enacted and repealed between the Zhou and Ming dynasties.
The 18th century Industrial Revolution brought about such innovations as the thermometer and hydrometer. These tools increased efficiency to the point that mass production of beer was possible for the first time in history[clarification needed]. In 1857, French microbiologist Louis Pasteur explained the role of yeast in beer fermentation, allowing brewers to develop strains of yeast with desirable properties such as efficiency converting sugar to alcohol and ability to handle higher alcohol content.
Throughout the first half of the 20th century, homebrewing in the UK was circumscribed by taxation: the Inland Revenue Act of 1880 introduced a 5-shilling homebrewing licence. Chancellor of the Exchequer Reginald Maudling removed the requirement for a brewing licence in 1963. Australia followed suit in 1972 when Gough Whitlam repealed the law prohibiting the brewing of all but the weakest beers in one of his first acts as Prime Minister.
In 1920, due to Prohibition, breweries across the United States were closed down or began making malt for other purposes. The homebrewing of beer with an alcohol content higher than 0.5% remained illegal until 1978 when Congress passed a bill repealing Federal restrictions and excise taxes, and President Jimmy Carter signed the bill, H.R. 1337, into law, legalizing homebrewing of beer in the United States. Within months of homebrewing's full legalization, Charlie Papazian founded the Brewers Association and American Homebrewers Association. In 1984, Papazian published The Complete Joy of Home Brewing which remains in print alongside later publications such as Graham Wheeler's Home Brewing: The CAMRA Guide.
People choose to brew their own beer for a variety of reasons. Many homebrew to avoid a higher cost of buying commercially equivalent beverages. Brewing domestically also affords one the freedom to adjust recipes according to one's own preference, create beverages that are unavailable on the open market or beverages that may contain fewer calories, or less or more alcohol.
Some people join homebrewing clubs and enter homebrew competitions. The Beer Judge Certification Program (BJCP) is an American organization which oversees homebrew competitions, certifies judges, and offers categories for judging. Similar British organizations are The National Guild of Wine and Beer Judges, and the National Association of Wine and Beermakers (Amateur) - (NAWB), who have held an annual show since 1959.
This section needs additional citations for verification. (July 2009)
|Australia||Legal for individuals to produce beer and wine for personal use.||Illegal to distil alcohol (e.g. spirits) without an excise manufacturer licence. Permission is also required from the Australian Taxation Office to own, possess, dispose of, buy, sell, import or manufacture a still of over 5 litres capacity, whether it is being used to produce alcohol or not.|
|Austria||Legal for personal use only, not for sale.||Legal to distill alcohol with a permission or license.|
|Canada||Legal in most Canadian provinces. Liquor laws are regulated provincially, while the federal government has laws about taxation and importation of beer, wine and other liquors.||Legal with a license to distill granted by the (provincial) government.|
|Czech Republic||Legal. 2000 Litres per household per year of beer for personal use, including notification of the customs office. 2000 litres of wine household per year.||Not permitted although every household can distill fermented fruit only, up to 30 litres per year in a local distillery, for personal use only.|
|Denmark||Legal. No limit per household per year of beer, given that it is for personal consumption.||Not permitted - Distillation licenses not available for persons.|
|Finland||Legal for personal use only.||Illegal. Only a commercial manufacturer can apply for a manufacturing permit.|
|Germany||Legal. 200 litres of beer per household per year may be produced without taxation, but notification of the local customs office is necessary. Larger quantities are taxed according to law.||Illegal. Distillation licenses not available for persons.|
|Hong Kong||Legal.||Legal with a license, otherwise punishable by fine and/ or forfeiture.|
|Hungary||Legal. 1000 litres of beer per person per year may be produced without taxation, but notification of the local customs office is necessary. Larger quantities are taxed according to law.||Legal. 50 litres of palinka per person per year may be produced without taxation, but notification of the local customs office is necessary. Larger quantities are taxed according to law.|
|Iceland||Legal up to 2.25% alcohol by volume only.||Illegal except for officially licensed and regulated distilleries.|
|India||Legal for personal use in certain states. No national law exists that specifically prevents brewing. Some states ban alcohol completely.||Illegal.|
|Ireland||Legal for personal use. Illegal with intent to sell or if sold for profit.||Illegal except for officially licensed and regulated distilleries.|
|Italy||Legal only for personal use.||Illegal|
|Japan||Legal up to 1% alcohol by volume only; suppliers sell homebrewing equipment and kits, leaving it up to the customer to brew within the law.||Illegal.|
|Malaysia||Illegal. Exemption is given to natives in Sabah and Sarawak for their own consumption.||Illegal.|
|New Zealand||Legal for personal use, not for selling without a license.||Legal since 1996 to distill spirits for personal consumption, not for selling without a license.|
|Netherlands||Legal for personal use only.||Illegal except for officially licensed and regulated distilleries.|
|Norway||Legal for personal use only.||Illegal|
|Poland||Legal for personal use only, not for sale.||Illegal|
|Russian Federation||Legal for personal use only.||Legal for personal use.|
|Singapore||Legal up to 30 litres per household per month. Brewers must be 18 years of age or older, and the brewing process must not "degrade the environment". The product must not be sold.||Illegal without a license. License fees are only practical for commercial distilleries.|
|South Africa||Legal for home brewed beers in unlimited quantities for personal use only, not for sale or barter, without any required permits or licenses. Registration as a "manufacturer not for commercial use" at the South African Revenue Service (SARS) is required to produce wine at home.||Registration and a permit are required to own, operate, or have a still in one's possession. Producing distilled spirits at home is limited "for own use" only and products may not be sold, or used for bartering.|
As of 2010 "agricultural distilling" permits are no longer available. Commercial operations require a micro-manufacturing license (for quantities up to 2 million litres of spirits per year), and various other permits are required. For larger quantities, a full manufacturing license and various permits are required.
|Sweden||Legal for personal use only, not for sale.||Illegal|
|Taiwan||Legal for personal use only, not for sale.|
|Turkey||Legal up to 350 litres for personal use.||Illegal|
|United Kingdom||Legal in unlimited quantity for domestic consumption only. Fermented products for sale must include payment of alcohol duty and registration with HM Revenue and Customs.||Legal with a license to distill granted by the government.|
|United States||Legal in all states. Individual states remain free to restrict or prohibit the manufacture of beer, mead, hard cider, wine and other fermented alcoholic beverages at home. Until 2013, Alabama and Mississippi were the only states with laws prohibiting the homebrewing of beer. Alabama and Mississippi both legalized home brewing in their respective 2013 legislative sessions. Although all state governments have legalized homebrewing, some states retain local options that permit local governments to make homebrewing illegal under municipal law. Alaska is one such state where the local option is currently exercised.
Most states permit homebrewing of 100 US gallons (380 L) of beer per adult (of 21 years or older) per year and up to a maximum of 200 US gallons (760 L) per household annually when there are two or more adults residing in the household. Because alcohol is taxed by the federal government via excise taxes, homebrewers are restricted from selling any beer they brew. This similarly applies in most Western countries. In 1978, President Jimmy Carter signed into law a bill allowing home beers, which was at the time not permitted without paying the excise taxes as a holdover from the prohibition of alcoholic beverages (repealed in 1933). This change also exempted home brewers from posting a "penal bond" (which currently ranges from a minimum of $1000.00 to a maximum of $500,000) which had the prohibitive effect of economically preventing brewers of small quantities from pursuing their hobby.
|Regulated at the National level under USC Title 26 subtitle E Ch51. Production of distilled alcohols for consumption carries an excise tax and numerous requirements must be met to legally produce.|
Owning or operating a distillation apparatus without filing the proper paperwork and paying the taxes carries federal criminal penalties.
Homebrewing kits come in many different types and from many different manufacturers. A local homebrew store may create some of their own kits by packaging materials together. Most kits come with a full set of instructions for brewing. These instructions, sometimes called recipes, may vary widely in the amount of instruction given. For instance, many all-grain kits assume a familiarity with the brewing process and so may give fewer specific instructions on the general process. Many advanced brewers prefer to design and perfect their own recipes rather than buy kits. Kits may or may not include yeast.
For brewers with equipment and advanced knowledge about the brewing process, all-grain kits include all the ingredients necessary to create homebrew beer. Most kits include grain and hops, some kits may also include yeast that pairs well with the style of beer. A full set of instructions is generally included. What sets these kits apart from others is the inclusion of malted grain which must first undergo a mash to extract the sugars. This combination of liquid and sugars is known as wort (pronounced "wert") and is necessary for fermentation. A full boil of the wort is then required, with one or more hop additions at different times depending on style. A typical brew session using all-grain takes between 4 and 6 hours, not including fermentation.
Some kits contain a concentrated malt extract rather than grain. Malt extract can be either dry or in a syrup form, both used to produce fermented syrup. A few advanced kits may also come with a small amount of milled, malted grain that must be steeped with the wort before boiling. A grain bag is usually included to facilitate this process. These additional grains help add different character to the beer so that a single extract can be used to brew several varieties of beer. A full boil is required, with hop additions at different times depending on style. A typical brew session using extract typically takes 2 hours, not including fermentation.
Pre-hopped malt extractEdit
Sometimes known as beer in a can, no-boil, and hopped wort, these beer kits contain liquid malt extract that has already been boiled with hops to introduce bitterness and flavor. Pre-hopped kits simplify the brewing process by removing the need to add hops at specific times during the boil. Some kits may not require a boil at all, though this may increase the risk of off flavors in the resulting beer due to contamination from bacteria and wild yeasts. While some feel the quality of beer from these kits can be on par with commercial beer or homebrew made from other methods, others feel that pre-hopped extract provides hop bitterness with little flavor and bouquet. A typical brew session using pre-hopped ingredients may take less than an hour, not including fermentation.
Brewing in a bagEdit
Brewing in a bag (BIAB) is a simplified all-grain technique developed in Australia. The main pioneer and continuing authority on this method is Patrick Hollingdale. The hallmarks of BIAB are a single brewing vessel, a fine mesh bag to hold the grist (crushed malt/grain) and a single heat source. The bag, usually made of nylon or fashioned out of a voile material lines the brewing pot which contains the total volume of water needed for the entire brewing process. The water is then heated to strike temperature and then the grist is added. The traditional brewing technique of sparging (rinsing the grains) is skipped and after the mashing period is complete (typically 60–90 minutes) the grain bag holding the spent grains is removed (lautering) and the bag is compressed to drain the wort from the grain ball. The all-grain brewing process then proceeds as normal: boiling, cooling, pitching and fermenting. Traditional mashing methods require three vessels and at least two heat sources. Brew in a bag has revolutionised home all-grain brewing as batch sizes of 9 to 45.5 litres (2.4 to 12.0 US gal) of wort into the fermenter are easily employed without any compromising on quality or versatility. A typical brew session using BIAB is typically 3 hours, not including fermentation.
Ingredients outside the kitsEdit
Cold water is preferred for the yeast due to its high oxygen content.
Some homebrewing kits usually instruct that a tablespoon of sucrose should be added per bottle.
The principles behind the process of homebrewing beer are similar to commercial brewing. A hopped wort is produced and yeast pitched into the wort to stimulate fermentation. The complexity of the process is mostly determined by the approach used to manufacture the wort; by far the simplest method is kit brewing.
Mashing is the step required to convert starch in the grains into sugar by utilizing natural enzymes. This step varies depending on the skill of the home brewer.
For extract brewing, the mashing has been done by the supplier of the malt extract. No mashing is required for the home brewer in this instance.
A partial mash differs from an extract brew in that the extract remains enzymatically active. Unlike dead malts where some of the starch has been converted to sugar via the action of heat and the natural enzymes have been destroyed, wheat and unmalted extracts need the help of enzymes to convert their starches into sugars.
The next step up from extract brewing is to use a diastatically active malt extract to convert starches from other beer adjuncts such as flaked and torrified barleys, flaked and torrified wheat, wheat flour, and flaked oats into fermented syrup. These extracts are currently only available in the canned form. Unmalted barleys and wheats can add extra "body" to a finished beer.
Advanced homebrewers forgo the use of concentrated extract and instead convert starch into sugars from the grains themselves. The wort is made by making a mash from crushed malted barley (or alternative grain adjuncts such as unmalted barley, wheat, oats, corn or rye) and hot water. This requires a vessel known as a mash tun, which is often insulated. The process is often referred to as all grain brewing.
In one procedure popular with homebrewers called the "Infusion Mash", milled grains are combined in the tun and hot water is added. Before being combined with the grains, the water is heated to a temperature that is hotter than the desired temperature for enzymatic activity. The reason the water is heated is to compensate for the fact that the grain are cooler than the desired temperature.
The grains are infused with yet hotter water to rinse more sugars from the mash in a process known as sparging. There are two types of sparging. Fly sparging and batch sparging. Fly sparging involves rinsing the grain bed by adding small amounts of hot water to the top while draining equal amounts from the bottom. Batch sparging involves adding all or most of your sparge water at one time to the grain bed and slowly draining it from the bottom. The sparging process will also stop any further enzymatic activity if much hotter water is used; conversely the mash may be heated to around 80 °C (176 °F) to end such activity prior to placing it in the lauter-tun, and to prevent cooler grain from lowering the sparge water temperature to a lower than desirable figure.
Boiling the wortEdit
Whether the homebrewer chooses to mash their own grains or chooses to purchase malt extracts, the homebrewer will then need to boil the liquid and add hops. The length of time the wort boils with the hops varies depending on the style of beer, but is usually 60–90 minutes.
Hops are added at different times during the boil, depending on the desired result. Hops added at the beginning of the boil contribute bitterness, hops added in the last thirty minutes contribute flavor. Hops added in the last few minutes or even after the end of the boil contribute both flavor and hop aroma. These hop additions are generally referred to as bittering, flavor, and aroma additions respectively.
Cooling the wortEdit
The primary reason to cool the wort is to get the wort to the proper temperature for healthy yeast propagation. Other benefits of rapidly cooling of the wort include "locking in" hop flavor and aroma, aiding in the production of "cold break" where haze-producing proteins coagulate ultimately resulting in a clearer beer, slowing the production of dimethyl sulfide (DMS), and hindering the growth of wort contamination by pitching yeast as soon as possible.
Many homebrewers use an inexpensive wort chiller called an "immersion chiller." These resemble the "worms" used in distilleries consisting of a coiled length of copper or stainless steel tubing (typically 50 feet in length) with an inlet and outlet connection. The inlet is attached to a source of cool water such as a sink faucet. The immersion chiller is inserted into the hot wort then cool water pumped is through the coil where a heat exchange occurs thus lowering the temperature of the wort.
Many homebrewers also use a "counterflow chiller." This device consists of a tube of copper or stainless steel tubing nested inside a larger diameter length of tube. It resembles an immersion chiller but works more like plate chiller in that hot wort is circulated through the inner tube and cool water is passed through the outer tube counter to the direction of the hot wort, thereby cooling the wort quickly.
Some homebrewers use the 'no-chill' approach. It is a water-conserving technique, depending on the ambient temperature being lower to cool the hot wort. After the boil the hot wort is racked into a fitting fermenter. After placing the cap or the lid, the fermenter is tumbled slightly to let the hot wort sanitise all internal surfaces. It then will be left alone (often overnight) until it has reached pitching temperatures, what may take up to the best part of a day. Contamination should not be an issue since near-boiling wort is a very effective sanitiser.
Once the wort has cooled to a temperature that is friendly to yeast, the yeast is "pitched" into the wort and allowed to ferment. It is at this point that 'wort" becomes "beer." Primary fermentation in homebrewing takes place in large glass or plastic carboys or food-grade plastic buckets, nearly always sealed. When sealed, the fermenter is stoppered with a fermentation lock which allows the carbon dioxide gas produced to vent, while preventing other gasses and particles from entering. Recent innovations in nanotechnology have enabled a fermentation lock called the Sterilock to also prevent bacteria, wild yeasts and other potential harmful fungi reaching the fermenter although in some beer styles known as Sour Beer, bacteria or wild yeasts are desirable to obtain the sour characteristics. During this time, temperatures should be kept at optimum temperature for the particular yeast strain being used. For ale this temperature is usually 18–24 °C (64–75 °F);  for lager it is usually much colder, around 10 °C (50 °F). A vigorous fermentation then takes place, usually starting within twelve hours and continuing over the next few days. During this stage, the fermentable sugars (maltose, glucose, and sucrose) are consumed by the yeast, while ethanol and carbon dioxide are produced as byproducts by the yeast. A layer of sediment, the lees or "trub", appears at the bottom of the fermenter, composed of heavy fats, proteins and inactive yeast. This yeast is sometimes reused in subsequent batches. Often, the brew is moved to a second fermenting vessel after primary fermentation called a secondary fermenter. This secondary fermentation process is often utilized by more advanced home brewers to enhance flavor. While not required, it is generally practiced by home brewers who wish to age or clarify their beer by removing it from the sediment left behind by primary fermentation, often through the addition of isinglass, colloidal silicon dioxide, or spakolloid. In addition to using two different fermenting containers, some home brewers may choose to only use one container in which primary and secondary fermentation take place. This container is usually referred to as a uni-tank. Uni-tanks are usually conical in shape, and can be made from plastic, glass, or stainless steel. A popular plastic conical for homebrewing is FastFerment, while a popular stainless steel conical fermenter for homebrewers is The Blichmann Fermenator.
Upon conclusion of fermentation, the beer is carbonated before it is consumed. This is typically done in one of two ways; force carbonation in a keg using compressed carbon dioxide, or bottle carbonation with priming sugar. Any bottle that is able to withstand the pressure of carbonation can be used, such as used beer bottles, flip-top bottles with rubber stoppers such as Grolsch, or even plastic bottles such as soda bottles, provided they are properly sanitised. Priming briefly reactivates the yeast that remains in the bottle, carbonating the brew. Homebrewed beers and lagers are typically unfiltered (filtering improves visual appearance of the product, but complicates carbonation). Bottled beer becomes clear quicker than kegged beer, since the yeast does not have as far to descend.
In homebrewing, adding priming sugar, malt extract, or carbonation tablets at bottling time to beer that has had its fermentable sugar content totally consumed is the safest approach to carbonation. Exceeding recommended levels of priming sugar for a given recipe can result in exploding bottles (aka "bottle bombs"), as is using inappropriate bottles or improper capping methods. Beer may also be force-carbonated using a keg and special bottling equipment so that the carbonation level can be carefully controlled. Carbonation is often achieved with approximately 4 ounces (110 g) of corn sugar boiled in 2 cups (500 mL) of water then cooled and added to a typical 5-US-gallon (19 L) batch before bottling.
Homebrewers often use kegs for aging, filtering, and storing beer. These are seldom the standard kegs used by major brewers to transport draught beer to wholesalers, but instead are reconditioned Cornelius kegs (colloquially known as "cornies") that were originally manufactured to store soda; these vessels are much easier to fill, clean and maintain than standard beer kegs.
These kegs are stainless steel cylinders that hold approximately 5 US gallons (19 L) of liquid. The keg is filled with liquid via a removable hatch on the top, which is then closed and sealed. Carbon dioxide is added to pressurize the keg via an inlet port on the top and is facilitated by gently rocking the brew back and forth. Liquid is dispensed via an outlet port attached to a tube that extends to the bottom of the keg. Pin-lock and ball-lock fittings (or posts) are the two types of couplings used on the inlet and outlet ports. Coke distributors used pin-lock fittings, while Pepsi distributors used ball-lock fittings. Ball-lock are most used. The pin-lock style is often referred to as a "Coke" keg or style and the ball-lock is often referred to as a "Pepsi" keg or style, though the fittings themselves are removable, serviceable, and contain interchangeable parts.
Homebrewers sometimes use 15.5-US-gallon (59 L) commercial kegs (known as 1/2 kegs) for boiling vessels in creating wort. The kegs are drilled for a drain at the bottom, and the top cut open to create a large stainless steel cooking kettle. Many times, the piece of metal cut out of the top is re-used to create a false bottom for straining wort during the mashing process, as well as to strain the boiled wort when adding hops without using a mesh grain bag.
Alternatively, kegs specifically designed for home brewing are available. The capacity may be matched to commercial extract brewing kits; typically 12 and 23 litres. Smaller 2.5-US-gallon (9.5 L) kegs are also made for ease of transporting to a function.
Kegs may have residual pressure, and this must be vented to avoid having the valve explode and injure or kill a person as the valve shoots out. Conventional 15.5-US-gallon (59 L) kegs have circle spring clips that can be removed to release the tap valve. Some kegs such as those used by Miller have threaded valves that are threaded into the keg, and after venting, can be opened by turning the valve counterclockwise using a piece of 1+3⁄4-inch-wide (44 mm) metal inserted between the valve ears and turned with an adjustable wrench, or pipe wrench. A "wonderbar" type of pry bar just happens to fit. After the valve is loose it is still retained by a safety catch that must be pried inward. A simple valve seal depressing tool and a screwdriver with a 1⁄8 inch (3.2 mm) diameter shaft must be used to release the safety catch. See "How to remove a Miller threaded keg valve (not retained by a spiral ring)". The safety catch prevents the valve from releasing under pressure.
It is not recommended that kegs be sanitised with bleach. To avoid unpleasant residuals, kegs are sanitised with an iodine- or oxygen-based sanitiser. Sanitisers like Star-San and B-Brite are commonly used. The ball lock valves may be unscrewed using wrenches to allow further cleaning or replacement of O-rings or poppet valves.
Homebrewing can reduce the environmental impact of fermented beverages by using less packaging and transportation than commercially brewed beverages, and by the use of refillable jugs, reusable bottles or other reusable containers.
Brewing software and technologyEdit
Brewers now have access to a variety of software tools, whether free/open source or commercial, which allow them to formulate and adjust recipes. There are also web based recipe creation and sharing sites with extensive recipe databases contributed by users that can be viewed or downloaded for printing or importation into software using BeerXML. More traditional Internet forums continue to provide brewers with sources of advice and information from their peers all over the world.
Homebrewers can submit their beer for evaluation into competitions. These competitions provide blind feed back to brewers so they can get objective feedback, make adjustments to improve their brewing, and be recognized for outstanding homebrew. Competitions can be organized by homebrew clubs, state fairs, or businesses. The AHA, BJCP, and HomebrewCompetitions.com all keep a list of currently scheduled competitions. Homebrewcompetitions.com is a free resource for homebrewers and homebrew competition organizers.
The Beer Judge Certification Program (BJCP) trains and certifies beer judges through classes and tasting and written tests. BJCP judges evaluate the beer on 5 criteria: Aroma, Appearance, Flavor, Mouthfeel, and Overall Impression. The beer is also compared to a style provided by the brewer and described in the BJCP Style Guidelines.
The Polish Homebrewer's Association (PSPD) has developed their own guidelines for beer competition judging and trains judges for competitions in Poland. A list of competitions is available on their website.
- Katz, Sandor Ellix (2012). The Art of Fermentation: An In-Depth Exploration of Essential Concepts and Processes from around the World. White River Junction, Vermont: Chelsea Green Publishing. p. 273. ISBN 978-1-60358-364-0.
- Mark, Joshua J. (2 March 2011). "Beer in the Ancient World". Ancient EU. Horsham, England: World History Encyclopedia. Archived from the original on 12 September 2016. Retrieved 16 November 2016.
- Anderson, Ray (2005). "The Transformation of Brewing: An Overview of Three Centuries of Science and Practice". Brewery History. Carisbrooke, Isle of Wight: Brewery History Society. 121: 5–24. Archived from the original on 16 November 2016. Retrieved 16 November 2016.
- Huang, H.T. Science and Civilisation in China, Vol. VI, No. 5. Fermentations and Food Science, p. 233. Cambridge Univ. Press (Cambridge), 2000. Accessed 8 November 2013.
- "Hansard 1803–2005". Retrieved 1 May 2009.
- "Brewers Contact: Journal of the Craft Brewing Association" (PDF). Archived from the original (PDF) on 22 March 2011. Retrieved 10 October 2006.
- "Adelaide Times Online". Archived from the original on 20 August 2006. Retrieved 10 October 2006.
- Papazian, Charlie (2003). The complete joy of homebrewing (3rd ed.). New York: Collins. ISBN 0-06-053105-3.
- "Bill Summary & Status - 95th Congress (1977 - 1978) - H.R.1337 - All Information - THOMAS (Library of Congress)". Archived from the original on 24 July 2013. Retrieved 24 August 2011.
Collins, Stacy Tibbetts, editor; Jim Parker, brewing consultant; photography by James (2006). Basic homebrewing: all the skills and tools you need to get started (1st ed.). Mechanicsburg, PA: Stackpole Books. ISBN 0-8117-3259-2.
|first=has generic name (help)
- "Decreasing calories in beer by making your own". Archived from the original on 18 January 2013. Retrieved 24 April 2017.
- "Craft Brewing Association". www.craftbrewing.org.uk. Retrieved 14 July 2009.
- "National Guild of Wine and Beer Judges - Home Page". www.ngwbj.org.uk. Retrieved 14 July 2009.
- "National Guild of Wine and Beer Judges - Beer Styles". www.ngwbj.org.uk. Retrieved 14 July 2009.
- "NAWB - History". www.nawb.org.uk. Retrieved 14 July 2009.
- "Excise on spirits and other excisable beverages".
- Law of Alcoholic drinks in Finland (in finnish)
- 274/1997 A decision by the Ministry of Social Affairs and Health on the prerequisites for granting a permit to manufacture, import and to carry out wholesale alcoholic beverages and distilled beverages, and on the requirements on the credibility of the applicant. (in Finnish)
- "Bier". Bundesministerium der Finanzen/Zoll/Germany. Archived from the original on 29 October 2013. Retrieved 11 September 2015.
- "Herstellung von Branntwein in Deutschland". Archived from the original on 8 July 2017.
- "Cap 109 s 58". Retrieved 1 October 2015.
- "Cap 109 s 64A". Retrieved 29 January 2016.
- "Áfengislög (in icelandic)". Althingi (Icelandic Government).
- "ipleaders.in". Legal help portal. Retrieved 19 November 2018. 18 October 2017.
- "Alcoholic Drinks in Iran". Euromonitor Online. EuroMonitor. Retrieved 11 November 2013.
- "Finance Act 1992". Government of Ireland.
- "Art. 34, DECRETO LEGISLATIVO 26 ottobre 1995, n. 504". Normattiva. Il portale della legge vigente, Istituto Poligrafico e Zecca dello Stato.
- "Homebrewing for fun, taste and profit". The Japan Times Online. Archived from the original on 14 July 2012. Retrieved 24 April 2017.
- "Is home brewing legal?". Frequently Asked Questions. Health Promotion Agency. Archived from the original on 1 March 2014. Retrieved 12 June 2013.
- "Mag ik zelf bier brouwen?".
- "Zelf accijnsgoederen maken".
- "FAQs on Home-Brewing of Beer and Other Fermented Liquors". www.customs.gov.sg. Archived from the original on 14 April 2008. Retrieved 9 September 2010.
- "Excise Factory Scheme". www.customs.gov.sg. Retrieved 18 October 2020.
- "Svensk författningssamling (in swedish)". Government of Sweden.
- "Small brewers beat odds in search of perfect beer". Taipei Times.
- "Article 8 of 4733rd act of legislation regulating tobacco and alcohol markets" (PDF).
- "Government Affairs". American Homebrewers Association. Retrieved 24 April 2017.
- Kim Chandler (9 May 2013). "Gov. Robert Bentley signs home brew bill". al.com.
- "Mississippi Legislature 2013 Regular Session Senate Bill 2183". 18 March 2013. Retrieved 22 May 2013.
- "Alaska". Archived from the original on 22 November 2013. Retrieved 24 April 2017.
- "27 CFR § 25.205 - Production".
- Donald J. Smith, Life, liberty and the pursuit of homebrewing, The Birmingham News, 21 May 2012.
- Brewer's Bond (PDF), Department of Treasury, 2014, retrieved 21 May 2014
- "TTBGov General Alcohol FAQ". Alcohol and Tobacco Trade Bureau. Retrieved 24 April 2017.
- "United States Code: Title 26,5601. Criminal penalties". Legal Information Institute. Retrieved 24 April 2017.
- Palmer, John. "How to Brew". Retrieved 7 September 2011.
- "Extract Brewing". Retrieved 18 June 2016.
- Palmer, John. "How to Brew". Retrieved 7 September 2011.
- Zainasheff, Jamil; Palmer, John J. (2007). Brewing classic styles: 80 winning recipes anyone can brew. Boulder, Colo.: Brewers Publications. ISBN 978-0-937381-92-2.
- Palmer, John J. (2001). How to brew: ingredients, methods, recipes, and equipment for brewing beer at home (2nd ed.). Monrovia, CA: Defenestrative Pub. Co. ISBN 0-9710579-0-7.
- "The Starch Conversion/Saccharification Rest - How to Brew". howtobrew.com. Retrieved 7 October 2016.
- Colby, Chris (7 January 2014). "Why Partial Mash? (Mashing vs. Steeping)". Beer & Wine Journal. Archived from the original on 28 March 2015. Retrieved 11 August 2016.
- "All-grain Brewing". Retrieved 18 June 2016.
- "All Grain Brewing Chemistry". BrewAllGrain.com. Retrieved 6 September 2011.
- "Calculating Strike Water Temperature For Mashing - Home Brew Answers". Home Brew Answers. Retrieved 18 February 2016.
- "The Fermentation Process". Retrieved 18 June 2016.
- Palmer, John J. (2006). How to Brew (3rd ed.). Colorado: Brewers Publications. ISBN 0-937381-88-8.
- White, Chris; Zainasheff, Jamil (2010). Yeast: The Practical Guide to Beer Fermentation. Colorado: Brewers Publications. ISBN 978-0-937381-96-0.
- "White Labs". Archived from the original on 9 November 2006. Retrieved 28 August 2011.
- "How to HomeBrew".
- "Cylindroconical Fermenters".
- "Home". conicalfermentor.com.
- "Plastic & Stainless Steel Conical Fermenters".
- "Beer and Wine Bottling Processes". Meheen. Retrieved 18 June 2014.
- Homebrewing For Dummies, 2nd ed.
- Berry, C. J. J. (1973). Home Brewed Beers and Stouts. Andover, Hampshire: The Amateur Winemaker. pp. 63–64.
- Palmer, John (2006). How to Brew (3rd ed.). Colorado: Brewers Publications. p. 111. ISBN 0-937381-88-8.
- Westemeier, Ed (Summer 1995). "A Bottler's Guide to Kegging". Zymurgy.
- De Piro, George (September–October 1998). "Do the Mash! The Equipment Needed to Move to All-Grain". BrewingTechniques.
- Johnson, Dana (March–April 2001). "Principles of Cleaning and Sanitizing". Birko. Retrieved 18 June 2014.
- "Disassemble, Cleaning and Sanitizing a Cornelius Style Keg". Retrieved 24 April 2017.
- "Environmental Benefits of Home Brewing Beer". simplehomebrewbeer.com. Retrieved 15 January 2008.
- "When Passions Collide..." terrapass.com. Archived from the original on 31 December 2010. Retrieved 15 January 2008.
- "Beer Judge Certification Program (BJCP)". bjcp.org. Retrieved 10 January 2016.
- "Homebrew Events and Competition Calendar". American Homebrewers Association. http://114595893801098712889. Retrieved 10 January 2016.
- "Competition Schedule". www.bjcp.org. Retrieved 10 January 2016.
- "BJCP Scoresheet" (PDF). Retrieved 24 April 2017.
- "BJCP 2008 Style Guidelines - Index". bjcp.org. Retrieved 10 January 2016.
- "BJCP Style Guidelines". bjcp.org. Retrieved 10 January 2016.
- "BJCP 2015 Style Guidelines" (PDF).
- "Sędziowie". Archived from the original on 11 January 2017.
- "Konkursy". Archived from the original on 14 January 2017.