User:Peterriber/sandbox

A dielectric medium showing orientation of charged particles creating polarization effects. Such a medium can have a higher ratio of electric flux to charge (permittivity) than empty space

In electromagnetism, absolute permittivity is the measure of the resistance that is encountered when forming an electric field in a medium. In other words, permittivity is a measure of how an electric field affects, and is affected by, a dielectric medium. The permittivity of a medium describes how much electric field (more correctly, flux) is 'generated' per unit charge in that medium. More electric flux exists in a medium with a high permittivity (per unit charge) because of polarization effects. Permittivity is directly related to electric susceptibility, which is a measure of how easily a dielectric polarizes in response to an electric field. Thus, permittivity relates to a material's ability to transmit (or "permit") an electric field.

In SI units, permittivity ε is measured in farads per meter (F/m); electric susceptibility χ is dimensionless. They are related to each other through

where εr is the relative permittivity of the material, and ε0 = 8.854187817.. × 10−12 F/m is the vacuum permittivity.

Explanation

edit

In electromagnetism, the electric displacement field D represents how an electric field E influences the organization of electrical charges in a given medium, including charge migration and electric dipole reorientation. Its relation to permittivity in the very simple case of linear, homogeneous, isotropic materials with "instantaneous" response to changes in electric field is

 

where the permittivity ε is a scalar. If the medium is anisotropic, the permittivity is a second rank tensor.

In general, permittivity is not a constant, as it can vary with the position in the medium, the frequency of the field applied, humidity, temperature, and other parameters. In a nonlinear medium, the permittivity can depend on the strength of the electric field. Permittivity as a function of frequency can take on real or complex values.

In SI units, permittivity is measured in farads per meter (F/m or A2·s4·kg−1·m−3). The displacement field D is measured in units of coulombs per square meter (C/m2), while the electric field E is measured in volts per meter (V/m). D and E describe the interaction between charged objects. D is related to the charge densities associated with this interaction, while E is related to the forces and potential differences.

Vacuum permittivity

edit

The vacuum permittivity ε0 (also called permittivity of free space or the electric constant) is the ratio D/E in free space. It also appears in the Coulomb force constant, ke = 1/(4πε0).

Its value is[1]

 

where

c0 is the speed of light in free space,[2]
µ0 is the vacuum permeability.

Constants c0 and μ0 are defined in SI units to have exact numerical values, shifting responsibility of experiment to the determination of the meter and the ampere.[3] (The approximation in the second value of ε0 above stems from π being an irrational number.)

Relative permittivity

edit

The linear permittivity of a homogeneous material is usually given relative to that of free space, as a relative permittivity εr (also called dielectric constant, although this sometimes only refers to the static, zero-frequency relative permittivity). In an anisotropic material, the relative permittivity may be a tensor, causing birefringence. The actual permittivity is then calculated by multiplying the relative permittivity by ε0:

 

where χ (frequently written χe) is the electric susceptibility of the material.

The susceptibility is defined as the constant of proportionality (which may be a tensor) relating an electric field E to the induced dielectric polarization density P such that

 

where ε0 is the electric permittivity of free space.

The susceptibility of a medium is related to its relative permittivity εr by

 

So in the case of a vacuum,

 

The susceptibility is also related to the polarizability of individual particles in the medium by the Clausius-Mossotti relation.

The electric displacement D is related to the polarization density P by

 

The permittivity ε and permeability µ of a medium together determine the phase velocity v = c/n of electromagnetic radiation through that medium:

 

Dispersion and causality

edit

In general, a material cannot polarize instantaneously in response to an applied field, and so the more general formulation as a function of time is

 

That is, the polarization is a convolution of the electric field at previous times with time-dependent susceptibility given by χt). The upper limit of this integral can be extended to infinity as well if one defines χt) = 0 for Δt < 0. An instantaneous response corresponds to Dirac delta function susceptibility χt) = χ δt).

It is more convenient in a linear system to take the Fourier transform and write this relationship as a function of frequency. Because of the convolution theorem, the integral becomes a simple product,

 

This frequency dependence of the susceptibility leads to frequency dependence of the permittivity. The shape of the susceptibility with respect to frequency characterizes the dispersion properties of the material.

Moreover, the fact that the polarization can only depend on the electric field at previous times (i.e. χt) = 0 for Δt < 0), a consequence of causality, imposes Kramers–Kronig constraints on the susceptibility χ(0).

Complex permittivity

edit
 
A dielectric permittivity spectrum over a wide range of frequencies. ε′ and ε″ denote the real and the imaginary part of the permittivity, respectively. Various processes are labeled on the image: ionic and dipolar relaxation, and atomic and electronic resonances at higher energies.[4]

As opposed to the response of a vacuum, the response of normal materials to external fields generally depends on the frequency of the field. This frequency dependence reflects the fact that a material's polarization does not respond instantaneously to an applied field. The response must always be causal (arising after the applied field) which can be represented by a phase difference. For this reason, permittivity is often treated as a complex function of the (angular) frequency of the applied field ω:   (since complex numbers allow specification of magnitude and phase). The definition of permittivity therefore becomes

 

where

D0 and E0 are the amplitudes of the displacement and electrical fields, respectively,
i is the imaginary unit, i2 = −1.

The response of a medium to static electric fields is described by the low-frequency limit of permittivity, also called the static permittivity εs (also εDC ):

 

At the high-frequency limit, the complex permittivity is commonly referred to as ε. At the plasma frequency and above, dielectrics behave as ideal metals, with electron gas behavior. The static permittivity is a good approximation for alternating fields of low frequencies, and as the frequency increases a measurable phase difference δ emerges between D and E. The frequency at which the phase shift becomes noticeable depends on temperature and the details of the medium. For moderate fields strength (E0), D and E remain proportional, and

 

Since the response of materials to alternating fields is characterized by a complex permittivity, it is natural to separate its real and imaginary parts, which is done by convention in the following way:

 

where

ε’ is the real part of the permittivity, which is related to the stored energy within the medium;
ε” is the imaginary part of the permittivity, which is related to the dissipation (or loss) of energy within the medium.

It is important to realize that the choice of sign for time-dependence, exp(-iωt), dictates the sign convention for the imaginary part of permittivity. The signs used here correspond to those commonly used in physics, whereas for the engineering convention one should reverse all imaginary quantities.

The complex permittivity is usually a complicated function of frequency ω, since it is a superimposed description of dispersion phenomena occurring at multiple frequencies. The dielectric function ε(ω) must have poles only for frequencies with positive imaginary parts, and therefore satisfies the Kramers–Kronig relations. However, in the narrow frequency ranges that are often studied in practice, the permittivity can be approximated as frequency-independent or by model functions.

At a given frequency, the imaginary part of   leads to absorption loss if it is positive (in the above sign convention) and gain if it is negative. More generally, the imaginary parts of the eigenvalues of the anisotropic dielectric tensor should be considered.

In the case of solids, the complex dielectric function is intimately connected to band structure. The primary quantity that characterizes the electronic structure of any crystalline material is the probability of photon absorption, which is directly related to the imaginary part of the optical dielectric function ε(ω). The optical dielectric function is given by the fundamental expression:[5]

 

In this expression, Wc,v(E) represents the product of the Brillouin zone-averaged transition probability at the energy E with the joint density of states,[6][7] Jc,v(E); φ is a broadening function, representing the role of scattering in smearing out the energy levels.[8] In general, the broadening is intermediate between Lorentzian and Gaussian;[9][10] for an alloy it is somewhat closer to Gaussian because of strong scattering from statistical fluctuations in the local composition on a nanometer scale.

Tensorial permittivity

edit

According to the Drude model of magnetized plasma, a more general expression which takes into account the interaction of the carriers with an alternating electric field at millimeter and microwave frequencies in an axially magnatized semiconductor requires the expression of the permittivity as a non-diagonal tensor.[11] (see also Electro-gyration).

 

If   vanishes, then the tensor is diagonal but not proportional to the identity and the medium is said an uniaxial medium.

Classification of materials

edit

Materials can be classified according to their permittivity and conductivity, σ. Materials with a large amount of loss inhibit the propagation of electromagnetic waves. In this case, generally when σ/(ωε’) >> 1, we consider the material to be a good conductor. Dielectrics are associated with lossless or low-loss materials, where σ/(ωε’) << 1. Those that do not fall under either limit are considered to be general media. A perfect dielectric is a material that has no conductivity, thus exhibiting only a displacement current. Therefore it stores and returns electrical energy as if it were an ideal capacitor.

Lossy medium

edit

In the case of lossy medium, i.e. when the conduction current is not negligible, the total current density flowing is:

 

where

σ is the conductivity of the medium;
ε’ is the real part of the permittivity.
  is the complex permittivity

The size of the displacement current is dependent on the frequency ω of the applied field E; there is no displacement current in a constant field.

In this formalism, the complex permittivity is defined as[12]:

 

In general, the absorption of electromagnetic energy by dielectrics is covered by a few different mechanisms that influence the shape of the permittivity as a function of frequency:

  • First, are the relaxation effects associated with permanent and induced molecular dipoles. At low frequencies the field changes slowly enough to allow dipoles to reach equilibrium before the field has measurably changed. For frequencies at which dipole orientations cannot follow the applied field because of the viscosity of the medium, absorption of the field's energy leads to energy dissipation. The mechanism of dipoles relaxing is called dielectric relaxation and for ideal dipoles is described by classic Debye relaxation.

The above effects often combine to cause non-linear effects within capacitors. For example, dielectric absorption refers to the inability of a capacitor that has been charged for a long time to completely discharge when briefly discharged. Although an ideal capacitor would remain at zero volts after being discharged, real capacitors will develop a small voltage, a phenomenon that is also called soakage or battery action. For some dielectrics, such as many polymer films, the resulting voltage may be less than 1-2% of the original voltage. However, it can be as much as 15 - 25% in the case of electrolytic capacitors or supercapacitors.

Quantum-mechanical interpretation

edit

In terms of quantum mechanics, permittivity is explained by atomic and molecular interactions.

At low frequencies, molecules in polar dielectrics are polarized by an applied electric field, which induces periodic rotations. For example, at the microwave frequency, the microwave field causes the periodic rotation of water molecules, sufficient to break hydrogen bonds. The field does work against the bonds and the energy is absorbed by the material as heat. This is why microwave ovens work very well for materials containing water. There are two maxima of the imaginary component (the absorptive index) of water, one at the microwave frequency, and the other at far ultraviolet (UV) frequency. Both of these resonances are at higher frequencies than the operating frequency of microwave ovens.

At moderate frequencies, the energy is too high to cause rotation, yet too low to affect electrons directly, and is absorbed in the form of resonant molecular vibrations. In water, this is where the absorptive index starts to drop sharply, and the minimum of the imaginary permittivity is at the frequency of blue light (optical regime).

At high frequencies (such as UV and above), molecules cannot relax, and the energy is purely absorbed by atoms, exciting electron energy levels. Thus, these frequencies are classified as ionizing radiation.

While carrying out a complete ab initio (that is, first-principles) modelling is now computationally possible, it has not been widely applied yet. Thus, a phenomenological model is accepted as being an adequate method of capturing experimental behaviors. The Debye model and the Lorentz model use a 1st-order and 2nd-order (respectively) lumped system parameter linear representation (such as an RC and an LRC resonant circuit).

Measurement

edit

The dielectric constant of a material can be found by a variety of static electrical measurements. The complex permittivity is evaluated over a wide range of frequencies by using different variants of dielectric spectroscopy, covering nearly 21 orders of magnitude from 10−6 to 1015 Hz. Also, by using cryostats and ovens, the dielectric properties of a medium can be characterized over an array of temperatures. In order to study systems for such diverse excitation fields, a number of measurement setups are used, each adequate for a special frequency range.

Various microwave measurement techniques are outlined in Chen et al..[13] Typical errors for the Hakki-Coleman method employing a puck of material between conducting planes are about 0.3%.[14]

At infrared and optical frequencies, a common technique is ellipsometry. Dual polarisation interferometry is also used to measure the complex refractive index for very thin films at optical frequencies.

See also

edit

References

edit
  1. ^ electric constant
  2. ^ Current practice of standards organizations such as NIST and BIPM is to use c0, rather than c, to denote the speed of light in vacuum according to ISO 31. In the original Recommendation of 1983, the symbol c was used for this purpose. See NIST Special Publication 330, Appendix 2, p. 45 .
  3. ^ Latest (2006) values of the constants (NIST)
  4. ^ Dielectric Spectroscopy
  5. ^ Peter Y. Yu, Manuel Cardona (2001). Fundamentals of Semiconductors: Physics and Materials Properties. Berlin: Springer. p. 261. ISBN 3-540-25470-6.
  6. ^ José García Solé, Jose Solé, Luisa Bausa, (2001). An introduction to the optical spectroscopy of inorganic solids. Wiley. Appendix A1, pp, 263. ISBN 0-470-86885-6. {{cite book}}: Unknown parameter |nopp= ignored (|no-pp= suggested) (help)CS1 maint: extra punctuation (link) CS1 maint: multiple names: authors list (link)
  7. ^ John H. Moore, Nicholas D. Spencer (2001). Encyclopedia of chemical physics and physical chemistry. Taylor and Francis. p. 105. ISBN 0-7503-0798-6.
  8. ^ Solé, José García; Bausá, Louisa E; Jaque, Daniel (2005-03-22). Solé and Bausa. p. 10. ISBN 3-540-25470-6.
  9. ^ Hartmut Haug, Stephan W. Koch (1994). Quantum Theory of the Optical and Electronic Properties of Semiconductors. World Scientific. p. 196. ISBN 981-02-1864-8.
  10. ^ Manijeh Razeghi (2006). Fundamentals of Solid State Engineering. Birkhauser. p. 383. ISBN 0-387-28152-5.
  11. ^ [1] Prati E. (2003) "Propagation in gyroelectromagnetic guiding systems", J. of Electr. Wav. and Appl. 17, 8, 1177
  12. ^ John S. Seybold (2005) Introduction to RF propagation. 330 pp, eq.(2.6), p.22.
  13. ^ Linfeng Chen, V. V. Varadan, C. K. Ong, Chye Poh Neo (2004). "Microwave theory and techniques for materials characterization". Microwave electronics. Wiley. p. 37. ISBN 0-470-84492-2.{{cite book}}: CS1 maint: multiple names: authors list (link)
  14. ^ Mailadil T. Sebastian (2008). Dielectric Materials foress Communication. Elsevier. p. 19. ISBN 0-08-045330-9.

Further reading

edit
  • Theory of Electric Polarization: Dielectric Polarization, C.J.F. Böttcher, ISBN 0-444-41579-3
  • Dielectrics and Waves edited by von Hippel, Arthur R., ISBN 0-89006-803-8
  • Dielectric Materials and Applications edited by Arthur von Hippel, ISBN 0-89006-805-4.
edit

Category:Condensed matter physics Category:Electric and magnetic fields in matter Category:Physical quantities Category:Concepts in physics