In geometry, a triangle center or triangle centre is a point in the triangle's plane that is in some sense in the middle of the triangle. For example, the centroid, circumcenter, incenter and orthocenter were familiar to the ancient Greeks, and can be obtained by simple constructions.

Five important triangle centers.
  Reference triangle ABC
  Angle bisectors and incircle (intersect/centered at incenter I)
  Medians (intersect at centroid G)
  Perpendicular bisectors and circumcircle (intersect/centered at circumcenter O)
  Altitudes (intersect at orthocenter H)
  Nine-point circle (centered at nine-point center N which, along with H, G, O, lies on the Euler line e)

Each of these classical centers has the property that it is invariant (more precisely equivariant) under similarity transformations. In other words, for any triangle and any similarity transformation (such as a rotation, reflection, dilation, or translation), the center of the transformed triangle is the same point as the transformed center of the original triangle. This invariance is the defining property of a triangle center. It rules out other well-known points such as the Brocard points which are not invariant under reflection and so fail to qualify as triangle centers.

For an equilateral triangle, all triangle centers coincide at its centroid. However the triangle centers generally take different positions from each other on all other triangles. The definitions and properties of thousands of triangle centers have been collected in the Encyclopedia of Triangle Centers.

History

edit

Even though the ancient Greeks discovered the classic centers of a triangle, they had not formulated any definition of a triangle center. After the ancient Greeks, several special points associated with a triangle like the Fermat point, nine-point center, Lemoine point, Gergonne point, and Feuerbach point were discovered.

During the revival of interest in triangle geometry in the 1980s it was noticed that these special points share some general properties that now form the basis for a formal definition of triangle center.[1][2] Clark Kimberling's Encyclopedia of Triangle Centers contains an annotated list of over 50,000 triangle centers.[3] Every entry in the Encyclopedia of Triangle Centers is denoted by   or   where   is the positional index of the entry. For example, the centroid of a triangle is the second entry and is denoted by   or  .

Formal definition

edit

A real-valued function f of three real variables a, b, c may have the following properties:

  • Homogeneity:   for some constant n and for all t > 0.
  • Bisymmetry in the second and third variables:  

If a non-zero f has both these properties it is called a triangle center function. If f is a triangle center function and a, b, c are the side-lengths of a reference triangle then the point whose trilinear coordinates are   is called a triangle center.

This definition ensures that triangle centers of similar triangles meet the invariance criteria specified above. By convention only the first of the three trilinear coordinates of a triangle center is quoted since the other two are obtained by cyclic permutation of a, b, c. This process is known as cyclicity.[4][5]

Every triangle center function corresponds to a unique triangle center. This correspondence is not bijective. Different functions may define the same triangle center. For example, the functions   and   both correspond to the centroid. Two triangle center functions define the same triangle center if and only if their ratio is a function symmetric in a, b, c.

Even if a triangle center function is well-defined everywhere the same cannot always be said for its associated triangle center. For example, let   be 0 if   and   are both rational and 1 otherwise. Then for any triangle with integer sides the associated triangle center evaluates to 0:0:0 which is undefined.

Default domain

edit

In some cases these functions are not defined on the whole of   For example, the trilinears of X365 which is the 365th entry in the Encyclopedia of Triangle Centers, are   so a, b, c cannot be negative. Furthermore, in order to represent the sides of a triangle they must satisfy the triangle inequality. So, in practice, every function's domain is restricted to the region of   where   This region T is the domain of all triangles, and it is the default domain for all triangle-based functions.

Other useful domains

edit

There are various instances where it may be desirable to restrict the analysis to a smaller domain than T. For example:

  • The centers X3, X4, X22, X24, X40 make specific reference to acute triangles, namely that region of T where  
  • When differentiating between the Fermat point and X13 the domain of triangles with an angle exceeding 2π/3 is important; in other words, triangles for which any of the following is true:

 

  • A domain of much practical value since it is dense in T yet excludes all trivial triangles (i.e. points) and degenerate triangles (i.e. lines) is the set of all scalene triangles. It is obtained by removing the planes b = c, c = a, a = b from T.

Domain symmetry

edit

Not every subset DT is a viable domain. In order to support the bisymmetry test D must be symmetric about the planes b = c, c = a, a = b. To support cyclicity it must also be invariant under 2π/3 rotations about the line a = b = c. The simplest domain of all is the line (t, t, t) which corresponds to the set of all equilateral triangles.

Examples

edit

Circumcenter

edit

The point of concurrence of the perpendicular bisectors of the sides of triangle ABC is the circumcenter. The trilinear coordinates of the circumcenter are

 

Let   It can be shown that f is homogeneous:   as well as bisymmetric:   so f is a triangle center function. Since the corresponding triangle center has the same trilinears as the circumcenter, it follows that the circumcenter is a triangle center.

1st isogonic center

edit

Let A'BC be the equilateral triangle having base BC and vertex A' on the negative side of BC and let AB'C and ABC' be similarly constructed equilateral triangles based on the other two sides of triangle ABC. Then the lines AA', BB', CC' are concurrent and the point of concurrence is the 1st isogonal center. Its trilinear coordinates are

 

Expressing these coordinates in terms of a, b, c, one can verify that they indeed satisfy the defining properties of the coordinates of a triangle center. Hence the 1st isogonic center is also a triangle center.

Fermat point

edit

Let

 

Then f is bisymmetric and homogeneous so it is a triangle center function. Moreover, the corresponding triangle center coincides with the obtuse angled vertex whenever any vertex angle exceeds 2π/3, and with the 1st isogonic center otherwise. Therefore, this triangle center is none other than the Fermat point.

Non-examples

edit

Brocard points

edit

The trilinear coordinates of the first Brocard point are:   These coordinates satisfy the properties of homogeneity and cyclicity but not bisymmetry. So the first Brocard point is not (in general) a triangle center. The second Brocard point has trilinear coordinates:   and similar remarks apply.

The first and second Brocard points are one of many bicentric pairs of points,[6] pairs of points defined from a triangle with the property that the pair (but not each individual point) is preserved under similarities of the triangle. Several binary operations, such as midpoint and trilinear product, when applied to the two Brocard points, as well as other bicentric pairs, produce triangle centers.

Some well-known triangle centers

edit

Classical triangle centers

edit
ETC reference;
Name; Symbol
Trilinear coordinates Description
X1 Incenter I   Intersection of the angle bisectors. Center of the triangle's inscribed circle.
X2 Centroid G   Intersection of the medians. Center of mass of a uniform triangular lamina.
X3 Circumcenter O   Intersection of the perpendicular bisectors of the sides. Center of the triangle's circumscribed circle.
X4 Orthocenter H   Intersection of the altitudes.
X5 Nine-point center N   Center of the circle passing through the midpoint of each side, the foot of each altitude, and the midpoint between the orthocenter and each vertex.
X6 Symmedian point K   Intersection of the symmedians – the reflection of each median about the corresponding angle bisector.
X7 Gergonne point Ge   Intersection of the lines connecting each vertex to the point where the incircle touches the opposite side.
X8 Nagel point Na   Intersection of the lines connecting each vertex to the point where an excircle touches the opposite side.
X9 Mittenpunkt M   Symmedian point of the excentral triangle (and various equivalent definitions).
X10 Spieker center Sp   Incenter of the medial triangle. Center of mass of a uniform triangular wireframe.
X11 Feuerbach point F   Point at which the nine-point circle is tangent to the incircle.
X13 Fermat point X   [a] Point that is the smallest possible sum of distances from the vertices.
X15
X16
Isodynamic points S
S
  Centers of inversion that transform the triangle into an equilateral triangle.
X17
X18
Napoleon points N
N
  Intersection of the lines connecting each vertex to the center of an equilateral triangle pointed outwards (first Napoleon point) or inwards (second Napoleon point), mounted on the opposite side.
X99 Steiner point S   Various equivalent definitions.

Recent triangle centers

edit

In the following table of more recent triangle centers, no specific notations are mentioned for the various points. Also for each center only the first trilinear coordinate f(a,b,c) is specified. The other coordinates can be easily derived using the cyclicity property of trilinear coordinates.

ETC reference; Name Center function
 
Year described
X21 Schiffler point   1985
X22 Exeter point   1986
X111 Parry point   early 1990s
X173 Congruent isoscelizers point   1989
X174 Yff center of congruence   1987
X175 Isoperimetric point   1985
X179 First Ajima-Malfatti point  
X181 Apollonius point   1987
X192 Equal parallelians point   1961
X356 Morley center   1978[7]
X360 Hofstadter zero point   1992

General classes of triangle centers

edit

Kimberling center

edit

In honor of Clark Kimberling who created the online encyclopedia of more than 32,000 triangle centers, the triangle centers listed in the encyclopedia are collectively called Kimberling centers.[8]

Polynomial triangle center

edit

A triangle center P is called a polynomial triangle center if the trilinear coordinates of P can be expressed as polynomials in a, b, c.

Regular triangle center

edit

A triangle center P is called a regular triangle point if the trilinear coordinates of P can be expressed as polynomials in △, a, b, c, where is the area of the triangle.

Major triangle center

edit

A triangle center P is said to be a major triangle center if the trilinear coordinates of P can be expressed in the form   where   is a function of the angle X alone and does not depend on the other angles or on the side lengths.[9]

Transcendental triangle center

edit

A triangle center P is called a transcendental triangle center if P has no trilinear representation using only algebraic functions of a, b, c.

Miscellaneous

edit

Isosceles and equilateral triangles

edit

Let f be a triangle center function. If two sides of a triangle are equal (say a = b) then   so two components of the associated triangle center are always equal. Therefore, all triangle centers of an isosceles triangle must lie on its line of symmetry. For an equilateral triangle all three components are equal so all centers coincide with the centroid. So, like a circle, an equilateral triangle has a unique center.

Excenters

edit

Let  

This is readily seen to be a triangle center function and (provided the triangle is scalene) the corresponding triangle center is the excenter opposite to the largest vertex angle. The other two excenters can be picked out by similar functions. However, as indicated above only one of the excenters of an isosceles triangle and none of the excenters of an equilateral triangle can ever be a triangle center.

Biantisymmetric functions

edit

A function f is biantisymmetric if   If such a function is also non-zero and homogeneous it is easily seen that the mapping   is a triangle center function. The corresponding triangle center is   On account of this the definition of triangle center function is sometimes taken to include non-zero homogeneous biantisymmetric functions.

New centers from old

edit

Any triangle center function f can be normalized by multiplying it by a symmetric function of a, b, c so that n = 0. A normalized triangle center function has the same triangle center as the original, and also the stronger property that   Together with the zero function, normalized triangle center functions form an algebra under addition, subtraction, and multiplication. This gives an easy way to create new triangle centers. However distinct normalized triangle center functions will often define the same triangle center, for example f and  

Uninteresting centers

edit

Assume a, b, c are real variables and let α, β, γ be any three real constants. Let

 

Then f is a triangle center function and α : β : γ is the corresponding triangle center whenever the sides of the reference triangle are labelled so that a < b < c. Thus every point is potentially a triangle center. However the vast majority of triangle centers are of little interest, just as most continuous functions are of little interest.

Barycentric coordinates

edit

If f is a triangle center function then so is af and the corresponding triangle center is   Since these are precisely the barycentric coordinates of the triangle center corresponding to f it follows that triangle centers could equally well have been defined in terms of barycentrics instead of trilinears. In practice it isn't difficult to switch from one coordinate system to the other.

Binary systems

edit

There are other center pairs besides the Fermat point and the 1st isogonic center. Another system is formed by X3 and the incenter of the tangential triangle. Consider the triangle center function given by:

 

For the corresponding triangle center there are four distinct possibilities:   Note that the first is also the circumcenter.

Routine calculation shows that in every case these trilinears represent the incenter of the tangential triangle. So this point is a triangle center that is a close companion of the circumcenter.

Bisymmetry and invariance

edit

Reflecting a triangle reverses the order of its sides. In the image the coordinates refer to the (c, b, a) triangle and (using "|" as the separator) the reflection of an arbitrary point   is   If f is a triangle center function the reflection of its triangle center is   which, by bisymmetry, is the same as   As this is also the triangle center corresponding to f relative to the (c, b, a) triangle, bisymmetry ensures that all triangle centers are invariant under reflection. Since rotations and translations may be regarded as double reflections they too must preserve triangle centers. These invariance properties provide justification for the definition.

Alternative terminology

edit

Some other names for dilation are uniform scaling, isotropic scaling, homothety, and homothecy.

Non-Euclidean and other geometries

edit

The study of triangle centers traditionally is concerned with Euclidean geometry, but triangle centers can also be studied in non-Euclidean geometry.[10] Triangle centers that have the same form for both Euclidean and hyperbolic geometry can be expressed using gyrotrigonometry.[11][12][13] In non-Euclidean geometry, the assumption that the interior angles of the triangle sum to 180 degrees must be discarded.

Centers of tetrahedra or higher-dimensional simplices can also be defined, by analogy with 2-dimensional triangles.[13]

Some centers can be extended to polygons with more than three sides. The centroid, for instance, can be found for any polygon. Some research has been done on the centers of polygons with more than three sides.[14][15]

See also

edit

Notes

edit
  1. ^ actually the 1st isogonic center, but also the Fermat point whenever A,B,C ≤ 2π/3
  1. ^ Kimberling, Clark. "Triangle centers". Retrieved 2009-05-23. Unlike squares and circles, triangles have many centers. The ancient Greeks found four: incenter, centroid, circumcenter, and orthocenter. A fifth center, found much later, is the Fermat point. Thereafter, points now called nine-point center, symmedian point, Gergonne point, and Feuerbach point, to name a few, were added to the literature. In the 1980s, it was noticed that these special points share some general properties that now form the basis for a formal definition of triangle center
  2. ^ Kimberling, Clark (11 Apr 2018) [1994]. "Central Points and Central Lines in the Plane of a Triangle". Mathematics Magazine. 67 (3): 163–187. doi:10.2307/2690608. JSTOR 2690608.
  3. ^ Kimberling, Clark. "This is PART 26: Centers X(50001) – X(52000)". Encyclopedia of Triangle Centers. Retrieved 17 June 2022.
  4. ^ Weisstein, Eric W. "Triangle Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
  5. ^ Weisstein, Eric W. "Triangle Center Function". MathWorld–A Wolfram Web Resource. Retrieved 1 July 2009.
  6. ^ Bicentric Pairs of Points, Encyclopedia of Triangle Centers, accessed 2012-05-02
  7. ^ Oakley, Cletus O.; Baker, Justine C. (November 1978). "The Morley Trisector Theorem". The American Mathematical Monthly. 85 (9): 737–745. doi:10.1080/00029890.1978.11994688. ISSN 0002-9890.
  8. ^ Weisstein, Eric W. "Kimberling Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
  9. ^ Weisstein, Eric W. "Major Triangle Center". MathWorld–A Wolfram Web Resource. Retrieved 25 May 2009.
  10. ^ Russell, Robert A. (2019-04-18). "Non-Euclidean Triangle Centers". arXiv:1608.08190 [math.MG].
  11. ^ Ungar, Abraham A. (2009). "Hyperbolic Barycentric Coordinates" (PDF). The Australian Journal of Mathematical Analysis and Applications. 6 (1): 1–35., article #18
  12. ^ Ungar, Abraham A. (2010). Hyperbolic triangle centers : the special relativistic approach. Dordrecht: Springer. ISBN 978-90-481-8637-2. OCLC 663096629.
  13. ^ a b Ungar, Abraham Albert (August 2010). Barycentric Calculus in Euclidean and Hyperbolic Geometry. WORLD SCIENTIFIC. doi:10.1142/7740. ISBN 978-981-4304-93-1.
  14. ^ Al-Sharif, Abdullah; Hajja, Mowaffaq; Krasopoulos, Panagiotis T. (November 2009). "Coincidences of Centers of Plane Quadrilaterals". Results in Mathematics. 55 (3–4): 231–247. doi:10.1007/s00025-009-0417-6. ISSN 1422-6383. S2CID 122725235.
  15. ^ Prieto-Martínez, Luis Felipe; Sánchez-Cauce, Raquel (2021-04-02). "Generalization of Kimberling's Concept of Triangle Center for Other Polygons". Results in Mathematics. 76 (2): 81. arXiv:2004.01677. doi:10.1007/s00025-021-01388-4. ISSN 1420-9012. S2CID 214795185.
edit