The wood industry or lumber industry is the industry concerned with forestry, logging, timber trade, and the production of primary forest products and wood products (e.g. furniture) and secondary products like wood pulp for the pulp and paper industry. Some of the largest producers are also among the biggest owners of timberland. The wood industry has historically been and continues to be an important sector in many economies.
In the narrow sense of the terms, wood, forest, forestry and timber/lumber industry appear to point to different sectors, in the industrialized, internationalized world, there is a tendency toward huge integrated businesses that cover the complete spectrum from silviculture and forestry in private primary or secondary forests or plantations via the logging process up to wood processing and trading and transport (e.g. timber rafting, forest railways, logging roads).
Processing and products differs especially with regard to the distinction between softwood and hardwood. While softwood primarily goes into the production of wood fuel and pulp and paper, hardwood is used mainly for furniture, floors, etc.. Both types can be of use for building and (residential) construction purposes (e.g. log houses, log cabins, timber framing).
In 2008 the largest lumber and wood producers in the USA were
As these companies are often publicly traded, their ultimate owners are a diversified group of investors. There are also timber-oriented real-estate investment trusts.
According to sawmilldatabase, the world top producers of sawn wood in 2007 were:
|Company||Production or Capacity in m3/yr|
|West Fraser Timber Co Ltd||8460000|
|Resolute Forest Products||3760000|
|Sierra Pacific Industries||3200000|
|Tolko Industries Ltd||2500000|
Workers within the forestry and logging industry sub-sector fall within the agriculture, forestry, fishing, and hunting (AFFH) industry sector as characterized by the North American Industry Classification System (NAICS). The National Institute for Occupational Safety and Health (NIOSH) has taken a closer look at the AFFH industry's noise exposures and prevalence of hearing loss. While the overall industry sector had a prevalence of hearing loss lower than the overall prevalence of noise-exposed industries (15% v. 19%), workers within forestry and logging exceeded 21%. Thirty-six percent of workers within forest nurseries and gathering of forest products, a sub-sector within forestry and logging, experienced hearing loss, the most of any AFFH sub-sector. Workers within forest nurseries and gathering of forest products are tasked with growing trees for reforestation and gathering products such as rhizomes and barks. Comparatively, non-noise-exposed workers have only a 7% prevalence of hearing loss.
Worker noise exposures in the forestry and logging industry have been found to be up to 102 dBA. NIOSH recommends that a worker have an 8-hour time-weighted average of noise exposure of 85 dBA. Excessive noise puts workers at an increased risk of developing hearing loss. If a worker were to develop a hearing loss as a result of occupational noise exposures, it would be classified as occupational hearing loss. Noise exposures within the forestry and logging industry can be reduced by enclosing engines and heavy equipment, installing mufflers and silencers, and performing routine maintenance on equipment. Noise exposures can also be reduced through the hierarchy of hazard controls where removal or replacement of noisy equipment serves as the best method of noise reduction.
The examples and perspective in this section may not represent a worldwide view of the subject. (February 2021) (Learn how and when to remove this template message)
The Bureau of Labor Statistics (BLS) has found that fatalities of forestry and logging workers have increased from 2013 to 2016, up from 81 to 106 per year. In 2016, there were 3.6 cases of injury and illness per 100 workers within this industry.
The existence of a wood economy, or more broadly, a forest economy (in many countries a bamboo economy predominates), is a prominent matter in many developing countries as well as in many other nations with a temperate climate and especially in those with low temperatures. These are generally the countries with greater forested areas so conditions allow for development of local forestry to harvest wood for local uses. The uses of wood in furniture, buildings, bridges, and as a source of energy are widely known. Additionally, wood from trees and bushes, can be used in a variety of products, such as wood pulp, cellulose in paper, celluloid in early photographic film, cellophane, and rayon (a substitute for silk).
At the end of their normal usage, wood products can be burnt to obtain thermal energy or can be used as a fertilizer. The potential environmental damage that a wood economy could occasion include a reduction of biodiversity due to monoculture forestry (the intensive cultivation of very few trees types); and CO2 emissions. However, forests can aid in the reduction of atmospheric carbon dioxide and thus limit climate change.
Paper is today the most used wood product.
History of use of woodEdit
The wood economy was the starting point of the civilizations worldwide, since eras preceding the Paleolithic[clarification needed] and the Neolithic. It necessarily preceded ages of metals by many millennia, as the melting of metals was possible only through the discovery of techniques to light fire (usually obtained by the scraping of two very dry wooden rods) and the building of many simple machines and rudimentary tools, as canes, club handles, bows, arrows, lances. One of the most ancient handmade articles ever found is a polished wooden spear tip (Clacton Spear) 250,000 years old (third interglacial period), that was buried under sediments in England, at Clacton-on-Sea.
Successive civilizations such as the Egyptians and Sumerians built sophisticated objects of furniture. Many types of furniture in ivory and valuable woods have survived to our time practically intact, because secluded in inviolated secret tombs, they were protected from decay also by the dry environment of desert.[better source needed]Many buildings and parts of these (above all roofs) contained elements in wood (often of oak) forming structural supports and covering; means of transport such as boats, ships; and later (with the invention of the wheel) wagons and carriages, winches, flour mills powered by water, etc.
Dimensions and geographyEdit
The main source of the lumber used in the world is forests, which can be classified as virgin, semivirgin and plantations. Much timber is removed for firewood by local populations in many countries, especially in the third world, but this amount can only be estimated, with wide margins of uncertainty.
In 1998, the worldwide production of "Roundwood" (officially counted wood not used as firewood), was about 1,500,000,000 cubic metres (2.0×109 cu yd), amounting to around 45% of the wood cultivated in the world. Cut logs and branches destined to become elements for building construction accounted for approximately 55% of the world's industrial wood production. 25% became wood pulp (including wood powder and broccoli) mainly destined for the production of paper and paperboard, and approximately 20% became panels in plywood and valuable wood for furniture and objects of common use (FAO 1998). The World's largest producer and consumer of officially accounted wood are the United States, although the country that possesses the greatest area of forest in Russia.
In the 1970s, the countries with the largest forest area were: Soviet Union (approximately 8,800,000 km2), Brazil (5,150,000 km2), Canada (4,400,000 km2), United States (3,000,000 km2), Indonesia (1,200,000 km2) and Democratic Republic of Congo (1,000,000 km2). Other countries with important production and consumption of wood usually have a low density of population in relation to their territorial extension, here we can include countries as Argentina, Chile, Finland, Poland, Sweden, Ukraine.
By 2001 the rainforest areas of Brazil were reduced by a fifth (respect of 1970), to around 4,000,000 km2; the ground cleared was mainly destined for cattle pasture—Brazil is the world's largest exporter of beef with almost 200,000,000 head of cattle. The booming Brazilian ethanol economy based upon sugar cane cultivation, is likewise reducing forests area. Canadian forest was reduced by almost 30% to 3,101,340 km2 over the same period.
Importance in limiting climate changeEdit
Regarding the problem of climate change, it is known that burning forests increase CO2 in the atmosphere, while intact virgin forest or plantations act as sinks for CO2, for these reasons wood economy fights greenhouse effect. The amount of CO2 absorbed depends on the type of trees, lands and the climate of the place where trees naturally grow or are planted. Moreover, by night plants do not photosynthesize, and produce CO2, eliminated the successive day. Paradoxically in summer oxygen created by photosynthesis in forests near to cities and urban parks, interacts with urban air pollution (from cars, etc.) and is transformed by solar beams in ozone (molecule of three oxygen atoms), that while in high atmosphere constitutes a filter against ultraviolet beams, in the low atmosphere is a pollutant, able to provoke respiratory disturbances.
In a low-carbon economy, forestry operations will be focused on low-impact practices and regrowth. Forest managers will make sure that they do not disturb soil-based carbon reserves too much. Specialized tree farms will be the main source of material for many products. Quick maturing tree varieties will be grown on short rotations to maximize output.
Per nation/continental areaEdit
- Eucalyptus: these are seven hundred tree species from Australia, that grow very fast in tropical, sub-tropical and semi-arid climates, and are very resistant to forest fires (with their tree cortex) and drought. Its essential oil is used in pharmacology, its wood for building, and the small branches as firewood and pulpwood.
Brazil has a long tradition in the harvesting of several types of trees with specific uses. Since the 1960s, imported species of pine tree and eucalyptus have been grown mostly for the plywood and paper pulp industries. Currently high-level research is being conducted, to apply the enzymes of sugar cane fermentation to cellulose in wood, to obtain methanol, but the cost is much higher when compared with ethanol derived from corn costs.
- Brazilwood: has a dense, orange-red heartwood that takes a high red shine (brasa=ember), and it is the premier wood used for making bows for string instruments from the violin family. These trees soon became the biggest source of red dye, and they were such a large part of the economy and export of that country, that slowly it was known as Brazil.
- Hevea brasiliensis: is the biggest source of the best latex, that is used to manufacture many objects in rubber, as an example gloves, condoms, anti-allergic mattresses and tires (vulcanized rubber). Latex has the ability to adjust to the exact shape of the body part, an advantage over polyurethane or polyethylene gloves.
In Canada and the USEdit
There is a close relation in the forestry economy between these countries; they have many tree genera in common, and Canada is the main producer of wood and wooden items destined to the US, the biggest consumer of wood and its byproducts in the world. The water systems of the Great Lakes, Erie Canal, Hudson River and Saint Lawrence Seaway to the east coast and the Mississippi River to the central plains and Louisiana allows transportation of logs at very low costs. On the west coast, the basin of the Columbia River has plenty of forests with excellent timber.
The agency Canada Wood Council calculates that in the year 2005 in Canada, the forest sector employed 930,000 workers (1 job in every 17), making around $108 billion of value in goods and services. For many years products derived from trees in Canadian forests had been the most important export items of the country. In 2011, exports around the world totaled some $64.3 billion – the single largest contributor to Canadian trade balance.
Canada is the world leader in sustainable forest management practices. Only 120,000,000 hectares (1,200,000 km2; 463,320 sq mi) (28% of Canadian forests) are currently managed for timber production while an estimated 32,000,000 hectares (320,000 km2; 123,550 sq mi) are protected from harvesting by the current legislation.
- Cherry: a hardwood prized for its high quality in grain, width, color, and rich warm glow. The first trees were carried to the lands surrounding Rome (Latium) from Armenia. In the United States, most cherry trees are grown in Washington, Pennsylvania, West Virginia, California and Oregon.
- Cedar: this genus is a group of conifers of the family Pinaceae, originating from high mountain areas from the Carpathians, Lebanon and Turkey to the Himalayas. Their scented wood make them suitable for chests and closet lining. Cedar oil and wood is known to be a natural repellent to moths. Actually are planted in western and southern US, mostly for ornamental purposes, but also for the production of pencils (specially incense-cedar).
- Douglas fir: a native tree of the United States west coast and Mountain States, with records in fast growth and high statures in brief time. The coast Douglas fir grows in coastal regions up to altitudes of about 1,800 meters; the Rocky Mountain Douglas fir grows farther inland, at altitudes ranging from 800 m to 3,000 m or higher. The wood is used for construction, for homebuilt aircraft, for paper pulp, and also as firewood.
- Hybrid poplar is being investigated by Oak Ridge National Laboratory in Tennessee for genetic engineering to obtain a tree with a higher content of cellulose and a lower content in lignin, in such a way that the extraction of bioethanol (useful as a fuel) could be easier and less expensive.
- Walnut: a prized furniture and carving hardwood because of its colour, hardness, grain and durability. Walnut wood has been the timber of choice for gun makers for centuries. It remains one of the most popular choices for rifle and shotgun stocks.
In the Caribbean and Central AmericaEdit
- Mahogany: has a straight grain, usually free of voids and pockets. The most prized species come from Cuba and Honduras. It has a reddish-brown color, which darkens over time, and displays a beautiful reddish sheen when polished. It has excellent workability, is available in big boards, and is very durable. Mahogany is used in the making of many musical instruments, as drums, acoustic and electric guitars' back and side, and luxury headphones.
This section needs additional citations for verification. (January 2021) (Learn how and when to remove this template message)
The species that are ideal for the many uses in this type of economy are those employed by arboriculture, that are very well known for their features and the need for certain types of ground and climates.
- Fraxinus: being a lightweight wood is easy to transport, as firewood burns easily, grows in damp environments like those present in river flooding areas, stands pollution of water and air.
- Larix: in Italy it grows at high altitudes around mountain tops, its timber stand sudden climatic change, from icy winds to high temperatures in sunny afternoon summers, it is excellent for use in the building of exposed structures as bridges, roofs, etc.
- Stone pine: "Mediterranean pine" could be the noble emblem of many coastal areas in Italy, originally giant forests of pines extended from the mouth of the Tiber river until Liguria and Provence in France, over soils with high salinity, not very apt for agriculture. Its trees produce a vast amount of dry branches that can be burnt, cones (used for Christmas decoration) and needle-like foliage that can be burnt, or used as mulch. Oils and resins can be used in scents and ointments. The pinoli are useful elements in Italian cooking (along with basil are tritured to make pesto sauce). Currently, "progress" has brought to a severe reduction of this magnificent tree extensions, and in many places cheap beach buildings, car-parking and semi-abandoned areas have taken their place.
- Poplar: in Italy is the most important species for tree plantations, is used for several purposes as plywood manufacture, packing boxes, paper, matches, etc. It needs good quality grounds with good drainage, but can be used to protect the cultivations if disposed in windbreak lines. More than 70% of Italian poplar cultivations are located in the pianura Padana. Constantly the extension of the cultivation is being reduced, from 650 km2 in the 1980s to current 350 km2. The yield of poplars is about 1,500 t/km2 of wood every year. The production from poplars is around 45–50% of the total Italian wood production.
- In the history of art poplar was the wood of choice for painting surfaces as panels, as in Renaissance (The Mona Lisa by Leonardo da Vinci). Because of this reason, many of the products with the highest added value, extremely expensive, are made with wood from the humble but durable poplar.
- Because of the presence of tannic acid, poplar cortex was often used in Europe for the tanning of leather.
- Oak for cork: are trees with a slow growth, but long life, are cultivated in warm hill areas (min. temp. > −5°Celsius) in all the west area of Mediterranean shores. Cork is popular as a material for bulletin boards. Even if the production as stoppers for wine bottles is diminishing in favor of nylon stoppers, in the sake of energy saving granules of cork can be mixed into concrete. These composites have low thermal conductivity, low density and good energy absorption (earthquake resistant). Some of the property ranges of the composites are density (400–1500 kg/m3), compressive strength (1–26 MPa) and flexural strength (0.5–4.0 MPa). Because of this cork can be used as thermal isolation in buildings (as well in its natural form and as a mixture), useful also as sound insulation. In the shoe industry cork is used for soles and insoles. In the world there are 20,000 km2 of cork oak plantations, and every year are extracted around 300,000 tons of cork, 50% in Portugal, 15,000 in Italy (12,000 in the island of Sardinia). The advantage of this natural industry is that the extraction of cork from layers outer to the cortex does not kill the tree.
In Sweden, Finland and to an extent Norway, much of the land area is forested, the pulp and paper industry is one of the most significant industrial sectors. Chemical pulping produces an excess of energy, since the organic matter in black liquor, mostly lignin and hemicellulose breakdown products, is burned in the recovery boiler. Thus, these countries have high proportions of renewable energy use (25% in Finland, for instance). Considerable effort is directed towards increasing the value and usage of forest products by companies and by government projects.
- Scots pine and Norway spruce: These species comprise most of boreal forest, and together as a softwood mixture they are converted chemical pulp for paper.
- Birch: is a genus with many species of trees from Scandinavia and Russia, excellent for acid grounds. They act as pioneer species in the frozen border between taiga and tundra, are very resistant to periods of drought and icy conditions. The species Betula nana has been identified as the ideal tree for the acid grounds of the sides of sloped mountains, also in southern Europe, with soils poor in nutrients, where these trees can be used to restrain landslides. Dissolving pulp is produced from birch. Xylitol can be produced by hydrogenation of xylose, which is a byproduct of chemical pulping of birch.
Uses of woodEdit
The burning of wood is currently the largest use of energy derived from a solid fuel biomass. Wood fuel may be available as firewood (e.g. logs, bolts, blocks), charcoal, chips, sheets, pellets and sawdust. Wood fuel can be used for cooking and heating through stoves and fireplaces, and occasionally for fueling steam engines and steam turbines that generate electricity. For many centuries many types of traditional ovens were used to benefit from the heat generated by wood combustion. Now, more efficient and clean solutions have been developed: advanced fireplaces (with heat exchangers), wood-fired ovens, wood-burning stoves and pellet stoves, that are able to filter and separate pollutants (centrifuging ashes with rotative filters), thus eliminating many emissions, also allowing to recover a higher quantity of heat that escaped with the chimney fumes.
Combustion of wood is, however, linked to the production of micro-environmental pollutants, as carbon dioxide (CO2), carbon monoxide (CO) (an invisible gas able to provoke irreversible saturation of blood's hemoglobine), as well as nanoparticles.
In Italy poplar has been proposed as a tree cultivated to be transformed into biofuels, because of the excellent ratio of energy extracted from its wood because of poplar's fast growing and capture of atmospheric carbon dioxide to the small amount of energy needed to cultivate, cut and transport the trees. Populus x canadensis 'I-214', grows so fast that is able to reach 14 inches (36 cm) in diameter and heights of 100 feet (30 m) in ten years.
Charcoal is the dark grey residue consisting of impure carbon obtained by removing water and other volatile constituents from animal and vegetation substances. Charcoal is usually produced by slow pyrolysis, the heating of wood or other substances in the absence of oxygen. Charcoal can then be used as a fuel with a higher combustion temperature.
Wood gas generator (gasogen): is a bulky and heavy device (but technically simple) that transforms burning wood in a mix of molecular hydrogen (H2), carbon monoxide (CO), carbon dioxide (CO2), molecular nitrogen (N2) and water vapor (H2O). This gas mixture, known as "wood gas", "poor gas" or "syngas" is obtained after the combustion of dry wood in a reductive environment (low in oxygen) with a limited amount of atmospheric air, at temperatures of 900° Celsius, and can fuel an internal combustion engine.
In the time between World War I and World War II included, because of the lack of oil, in many countries, like Italy, France, Great Britain and Sweden, several gasoline-powered cars were modified, with the addition of a wood gas generator (a "gasogen"), a device powered by wood, coal, or burnable waste, able to produce (and purify) gas that immediately, in the same vehicle, could power a slightly modified ICE engine of a standard car (low-compression engine). Carburetor had to be changed with an air-gas mixer). There were several setbacks, as the great reduction of maximum speed and the need to drive using low gears and wisely dosing the amount of air. In modern cars, modified with a wood gas generator, gas emissions (CO, CO2 and NOx) are lower to those of the same vehicle running with gasoline (keeping the same catalytic converter).
Methanol (the simplest alcohol) behaves as a liquid at 25 °C, is toxic and corrosive, and in organic chemistry basic books is often called "the spirit of wood", since it can be obtained from wood fermentation. Rarely, when unwise wine-makers mix small chunks of wood and leaves with grapes, methanol can be found as a pollutant of the blend of water, ethanol and other substances derived from grape's fermentation.
Methanol can be used as an oxygen-rich additive for gasoline. However, it is usually much cheaper to produce methanol from methane or from syngas. Methanol is the most important base material for industrial chemistry, where it is often used to make more complex molecules through reactions of halogenation and chemical addition reaction.
The American M1 Abrams main battle tank is powered by a gas turbine of 1,500 hp (1,100 kW), that it is able to function also with a mix at 50% of wood powder and biodiesel, diesel fuel or kerosene. Its advantages over turbo-diesel engine, are the small size and light weight, the lack of a radiator (which gives an advantage against the effect of gun and cannon shots and missile strikes suffered in battle). A setback is the high fuel consumption, since the turbine engine has not the ability to work at a low revolutions per minute rate, much lower than ideal, and during the march this engine consumes twice as much fuel as a modern turbo-diesel engine with intercooler and direct injection.
Wood is relatively light in weight, because its specific weight is less than 500 kg/m3, this is an advantage, when compared against 2,000–2,500 kg/m3 for reinforced concrete or 7,800 kg/m3 for steel.
Wood is strong, because the efficiency of wood for structural purposes has qualities that are similar to steel.
|Concrete||(Rck300, fck 25 M-Pascal)||1250|
|Structural steel||Fe430 (ft = 430 MPa)||480|
|Glued laminated timber||(BS 11 ÷ BS 18)||470|
|Aluminium||(alloy 7020, ft 355 MPa)||200|
Bridges, levees, microhydro, piersEdit
Hardwood is used as a material in wooden houses, and other structures with a broad range of dimensions. In traditional homes wood is preferred for ceilings, doors, floorings and windows. Wooden frames were traditionally used for home ceilings, but they risk collapse during fires.
The development of energy efficient houses including the "passive house" has revamped the importance of wood in construction, because wood provides acoustic and thermal insulation, with much better results than concrete.
Earthquake resistant buildingsEdit
In Japan, ancient buildings, of relatively high elevation, like pagodas, historically had shown to be able to resist earthquakes of high intensity, thanks to the traditional building techniques, employing elastic joints, and to the excellent ability of wooden frames to elastically deform and absorb severe accelerations and compressive shocks.
In 2006, Italian scientists from CNR patented a building system that they called "SOFIE", a seven-storey wooden building, 24 meters high, built by the "Istituto per la valorizzazione del legno e delle specie arboree" (Ivalsa) of San Michele all'Adige. In 2007 it was tested with the hardest Japanese antiseismic test for civil structures: the simulation of Kobe's earthquake (7.2 Richter scale), with the building placed over an enormous oscillating platform belonging to the NIED-Institute, located in Tsukuba science park, near the city of Miki in Japan. This Italian project, employed very thin and flexible panels in glued laminated timber, and according to CNR researchers could brought to the construction of much more safe houses in seismic areas.
One of the most enduring materials is the lumber from virginian southern live oak and white oak, specially live oak is 60% stronger than white oak and more resistant to moisture. As an example, the main component in the structure of battle ship USS Constitution, the world's oldest commissioned naval vessel afloat (launched in 1797) is white oak.
Woodworking is the activity or skill of making items from wood, and includes cabinet making (cabinetry and furniture), wood carving, joinery, carpentry, and woodturning. Millions of people make a livelihood on woodworking projects.
History of crisis in wood economiesEdit
One of the most famous crisis of a wood-based economy is what happened in Classical Greece, where trees began to disappear specially in the areas of Attica, Boeotia and Peloponnesus where indiscriminate cutting of trees for several uses, associated to drought and wildfires led to a severe lack of timber to build lances, shields, ships, etc. and to a slow but progressive weakening in military and naval power of the peninsular kingdoms in Greece, that were overwhelmed by Epirus and by the Kingdom of Macedon, much more fertile lands because of their rainy winters. This process arrived to the apex with the conquest of Greece by Phillip II of Macedon.
The secret weapon of the Sarissaphoros soldiers (supported by peltast javelineers), commanded by Philipp II in the Battle of Chaeronea (338 BC) and in those that followed fought by Alexander the Great (which brought to the conquest of Lesser Asia, Babylon, Persia and Egypt), was the sarissa, a type of pike, longer and stronger (5–7 m.) than the other Greek lances, obtained from the heavy and strong cornel wood.
Notes and referencesEdit
- "Hardwood Industries – The Pacific Northwest's Source for Hardwood Lumber". Hardwoodind.com.
- Government of Canada, Foreign Affairs Trade and Development Canada (3 November 2008). "Softwood Lumber". GAC.
- Scott Bowe (6 June 2012). "Industry Trends and Marketing Strategies for the Hardwood Lumber Industry : Great Lakes Forest, Industry Products, and Resources Summit" (PDF). Sustainabledevelopmentinstitute.org. Retrieved 14 September 2018.
- "Softwood Lumber, Binational Softwood Lumber Council". Softwoodlumber.org.
- Roos, Anders; Flinkman, Matti; Jäppinen, Armas; Lönner, Göran; Warensjö, Mats (2001). "Production strategies in the Swedish softwood sawmilling industry". Forest Policy and Economics. 3 (3–4): 189–197. doi:10.1016/S1389-9341(01)00063-6.
- "Timberland REITs | Nareit". www.reit.com. Retrieved 2 September 2019.
- "America's Largest Private Companies – Industry is Lumber, Wood Production sorted by Rank". Forbes.com.
- "America's Largest Private Companies: #425 North Pacific Group". Forbes.com.
- "The World's Top Producers – The Sawmill Database". Sawmilldatabase.com.
- "Home – Hampton Lumber". Hampton Lumber.
- "Pfeifer Group • Holzverarbeitung • Export in 90 Länder". Pfeifergroup.com.
- ESMD, US Census Bureau Classification Development Branch. "US Census Bureau Site North American Industry Classification System main page". Census.gov. Retrieved 12 August 2018.
- Masterson, Elizabeth A.; Themann, Christa L.; Calvert, Geoffrey M. (January 2018). "Prevalence of hearing loss among noise-exposed workers within the agriculture, forestry, fishing, and hunting sector, 2003–2012". American Journal of Industrial Medicine. 61 (1): 42–50. doi:10.1002/ajim.22792. ISSN 1097-0274. PMC 5905332. PMID 29152771.
- Masterson, Elizabeth A.; Themann, Christa L.; Luckhaupt, Sara E.; Li, Jia; Calvert, Geoffrey M. (28 January 2016). "Hearing difficulty and tinnitus among U.S. workers and non-workers in 2007". American Journal of Industrial Medicine. 59 (4): 290–300. doi:10.1002/ajim.22565. ISSN 0271-3586. PMID 26818136.
- Pyykkö, I.; Koskimies, K.; Starck, J.; Pekkarinen, J.; Färkkilä, M.; Inaba, R. (July 1989). "Risk factors in the genesis of sensorineural hearing loss in Finnish forestry workers". British Journal of Industrial Medicine. 46 (7): 439–446. doi:10.1136/oem.46.7.439. ISSN 0007-1072. PMC 1009807. PMID 2765417.
- "NIOSHTIC-2 Publications Search - 20000050 - Criteria for a recommended standard... occupational noise exposure, revised criteria 1998". Cdc.gov. Retrieved 12 August 2018.
- "Industries at a Glance: Forestry and Logging: NAICS 113". Bls.gov. Retrieved 12 August 2018.
- "Adaptation of Forests and Forest Management to Changing Climate with Emphasis on Forest Health: a Review of Science, Policies, and Practices. Umeå, Sweden. August 25–28, 2008". Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- Tecnologia Dalle Origini al 2000, pag. 18
- "The Clacton Spear". Natural History Museum. Archived from the original on 28 October 2014. Retrieved 16 February 2012. CS1 maint: discouraged parameter (link)
- "History of Egyptian Furniture". 27 October 2009. Archived from the original on 27 October 2009. CS1 maint: discouraged parameter (link) CS1 maint: bot: original URL status unknown (link)
- FAO 1998 Archived 24 July 2008 at the Wayback Machine
- "Brazil seizes cattle illegally grazing on Amazon forest lands". Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- "Canadian Forests – Quick Facts". Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- "Air quality levels in Europe — European Environment Agency".
- "YourLungHealth.org – The Effects of Ozone Pollution".
- Trees and their role in carbon management for land and business Archived 27 September 2007 at the Wayback Machine, The Woodland Trust.
- "Brazzil Mag – Trying to understand Brazil since 1989".
- "Harvesting wood in Brazil". Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- "Wood-Works – Program of the Canadian Wood Council".
- "Canadian Forests Website – Home Page".
- "Classic American Furniture for the Home and Office from Green Design Furniture".
- A History of the Vegetable Kingdom – Page 334
- Cherry Production National Agricultural Statistics Service, USDA, Retrieved on 19 August 2008.
- "Cedarwood Oils".
- "Biofuels from Trees: Renewable Energy Research Branches Out".
- Graham, R. L.; Walsh, M. E. (1 February 1999). "A National Assessment of Promising Areas for Switchgrass, Hybrid Poplar, or Willow Energy Crop Production". OSTI 5051. Cite journal requires
- "Walnut Council—Growing Walnut and Other Fine Hardwoods".
- "Federlegno – Italian federation of wood producers and industry". Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- Karade SR. 2003. An Investigation of Cork Cement Composites. PhD Thesis. BCUC. Brunel University, UK.
- Olivares G, Ström J, Johansson C, Gidhagen L (June 2008). "Estimates of black carbon and size-resolved particle number emission factors from residential wood burning based on ambient monitoring and model simulations". Journal of the Air & Waste Management Association. 58 (6): 838–48. doi:10.3155/1047-32126.96.36.1998. PMID 18581814.
- UNITED STATES DEPARTMENT OF AGRICULTURE Gasogens Report (Original report dated 1944): now in the possession of the University of Wisconsin
- "AGT1500 Turbine Technology on Honeywell.com" (PDF). Archived from the original (PDF) on 9 September 2016. Retrieved 13 May 2017. CS1 maint: discouraged parameter (link)
- Girodivite.it. "Girodivite: Terremoti: dal Cnr arriva il palazzo antisismico".
- PROGETTOSOFIE: Edificio Antisismico in Legno
- "Dalla ricerca italiana la casa di legno che resiste al terremoto – Il Sole 24 ORE".
- "HMS Victory Service Life". HMS Victory website. Archived from the original on 28 August 2012. CS1 maint: discouraged parameter (link)
- "Parco Naturale Valpometto – I boschi di casa nostra".
- Fast Growing Trees
- Forestry Encyclopedia – Forests and Forestry in the Americas
- Canadian Forests – Quick Facts
- Canadian Forests – Information Reseources
- UNECE – FAO – Timber Committee – European Forestry Commission
- WOODGAS: Biomass Energy Foundation (BEF) website
- Oldest Wood house at Czech Republic