This is a template for generating an intersection or exit for a State not specified correctly - Must be the uppercase 2-to-3 letter abbreviation ie "WA" or "NSW" road article. It is a member of the {{Jctint}} suite of templates.

General usage

edit

This is the basic syntax you need to get a complete intersection table. Just copy and paste the code below:

{{AUSinttop}}
State not specified correctly
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

...and fill in the variables! For more entries, use this:

State not specified correctly
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Within a single LGA

edit

If a road is entirely within a single local government area, you may omit the LGA column by using the following code:

{{AUSinttop|noLGA=yes}}
State not specified correctly
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

Just copy and paste the above code, and fill in the variables! Also note that the table should be preceded by line explaining the omitted column, such as:

The entire freeway is in the [[City of Mitcham]].

For more entries, use this:

State not specified correctly
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Parameters

edit

For the above parameters, here's what you should fill in:

  • LGA: The name of the local government area in which the intersection is located. Full wiki markup is required, for example |LGA=[[City of Mitcham|Mitcham]]. Parameters such as LGAC can be used instead to avoid using full wiki markup (see below)
  • LGAspan: number of rows the LGA spans. If value=1, omit this parameter. If set, LGA (or LGAC etc.) should be omitted from the other rows it spans.
  • location: the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, State not specified correctly, so if the intersection is in multiple suburbs, you must use location_special (see below).
  • lspan: number of rows the location spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans
  • type: use to specify a shading for that intersection's row. The permitted types are:
    • closed: for highway intersections or interchanges that are now closed to traffic
    • mplex or concur: for a route multiplexing terminus or concurrencies.
    • trans: for a route transition – from one route number to either another route number, or a section without a route number, along a named road
    • unbuilt: for unbuilt roadway intersections/interchanges.
    • incomplete: for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.)
    • hov for interchanges that are only for High occupancy vehicle lanes
    • toll or etc for an interchange where tolls or electronic tolls are collected
    • Note: If the type parameter is used, the table must include a colour key at the bottom of the table. Use the |keys= parameter in {{jctbtm}} to generate a compliant legend.
  • km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres (see below)
  • road: road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations>
    • Generate route shields using {{AUshield}}
    • If there are multiple roads (i.e. intersecting road changes name at this intersection), use a slash (/) to separate roads
    • Generate an ndash (–) and wikilinked destinations using State not specified correctly
    • If destinations are to be entered manually, an ndash can be generated by the HTML character code &ndash;
  • notes: any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.

Additional Parameters

edit

In addition to those in the basic syntax, the following parameters may be used:

  • LGA_note: a note that appears in small text below the LGA
  • location_special: (replaces location) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup. {{SAcity}}, {{VICcity}} etc. are a useful shorthand.
  • km2: use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route.
  • uspan: number of rows the units spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.
  • rcspan: number of columns the road cell spans-if value=1, omit this parameter. Set |rcspan=2 to generate a left aligned cell that spans both the destination and notes column. Do not use for features such as a rivers and bridges - see place below. Important: if using this parameter, set |notes=none to avoid the notes cell spilling over the edge of the table.
  • nspan: number of rows the notes spans—if value=1, omit this parameter. If set, notes should be omitted from the other rows it spans.
  • place or bridge or tunnel: a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.
  • pspan or bspan or tspan: number of rows the above multicolumn cell spans-if value=1, omit this parameter.
  • Parameters that replace LGA: The parameters in the table below allow you to enter the LGA name as plain text, and the template will generate the necessary piped link. For example, |LGAC=Mitcham will generate  Mitcham , which links to the Wikipedia article City of Mitcham
Parameter Type of LGA
(name of article on Wikipedia)
LGAC "City of <name>"
LGA-C "<name> City"
LGARC "Rural City of <name>"
LGA-Co "<name> Council"
LGADC "District Council of <name>"
LGA-DC "<name> District Council"
LGAM "Municipality of <name>"
LGA-M "<name> Municipality"
LGA-R "<name> Region"
LGAS "Shire of <name>"
LGA-S "<name> Shire"
LGAAS "Aboriginal Shire of <name>"
LGAT "Town of <name>"

Any parameter which is empty can be omitted.

TemplateData

edit
TemplateData documentation used by VisualEditor and other tools
See a monthly parameter usage report for Template:AUSintcore in articles based on its TemplateData.

TemplateData for AUSintcore

A template for making intersection tables.

Template parameters

ParameterDescriptionTypeStatus
Exit number columns1

For an exit number column, set to "exit". For exit number and old exit number columns, set to "old"

Unknownoptional
State-cell spansspan

Number of rows that the state cell spans, for interstate routes. For routes within a single state/territory, do not use this parameter

Unknownoptional
LGA-cell spanLGAspan

Number of rows the LGA cell spans. If value=1, omit this parameter. If set, LGA (or LGAC etc) parameters should be omitted from the other rows it spans.

Default
Numberoptional
Local government areaLGA

The name of the local government area in which the intersection is located. Full wiki markup is required, for example: [[City of Mitcham|Mitcham]]

Stringrequired
Local government area - City of ____LGAC

Name of the local government area, when the name is of the form "City of NAME"

Unknownoptional
Local government area - ____ CityLGA-C

Name of the local government area, when the name is of the form "NAME City"

Unknownoptional
Local government area - Rural City of ____LGARC

Name of the local government area, when the name is of the form "Rural City of NAME"

Unknownoptional
Local government area - ____ CouncilLGA-Co

Name of the local government area, when the name is of the form "NAME Council"

Unknownoptional
Local government area - District Council of ____LGADC

Name of the local government area, when the name is of the form "District Council of NAME"

Unknownoptional
Local government area - ____ District CouncilLGA-DC

Name of the local government area, when the name is of the form "NAME District Council"

Unknownoptional
Local government area - Municipality of ____LGAM

Name of the local government area, when the name is of the form "Municipality of NAME"

Unknownoptional
Local government area - ____ MunicipalityLGA-M

Name of the local government area, when the name is of the form "NAME Municipality"

Unknownoptional
Local government area - ____ RegionLGA-R

Name of the local government area, when the name is of the form "NAME Region"

Unknownoptional
Local government area - Shire of ____LGAS

Name of the local government area, when the name is of the form "Shire of NAME"

Unknownoptional
Local government area - ____ ShireLGA-S

Name of the local government area, when the name is of the form "NAME Shire"

Unknownoptional
Local government area - Aboriginal Shire of ____LGAAS

Name of the local government area, when the name is of the form "Aboriginal Shire of NAME"

Unknownoptional
Local government area - Town of ____LGAT

Name of the local government area, when the name is of the form "Town of NAME"

Unknownoptional
LGA_noteLGA_note

A note that appears in small text below the LGA

Unknownoptional
locationlocation

the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, <state>, so if the intersection is in multiple suburbs, you must use the "location_special" parameter

Stringsuggested
location_speciallocation_special

(replaces "location" parameter) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup.

Unknownoptional
lspanlspan

number of rows the location cell spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans

Stringoptional
lcspanlcspan

number of columns the location cell spans—if value=1, omit this parameter. If set, LGA and/or state cells should be omitted from this rows

Unknownoptional
lcalignlcalign

Alignment of the location cell, if "lcspan" parameter is used. Can be set to "left", "right", or "center"

Unknownoptional
typetype

use to specify a shading for the intersection's row. The permitted types are: "closed" for highway intersections or interchanges that are now closed to traffic; "concur" for a route concurrency terminus; "trans" for a route transition – from one route number to either another route number, or a section without a route number, along a named road; "unbuilt" for unbuilt roadway intersections/interchanges; "incomplete" for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.); "hov" for interchanges that are only for High occupancy vehicle lanes; "toll" or "etc" for an interchange where tolls or electronic tolls are collected

Unknownoptional
unitunit

no description

Unknownoptional
kmkm

km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres

Numbersuggested
km2km2

use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route

Numberoptional
units-cells spanuspan

number of rows the units cells spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.

Unknownoptional
oldold

Old exit number

Unknownoptional
ospanospan

number of rows the old exit number spans—if value=1, omit this parameter. If set, "old" parameter should be omitted from the other rows it spans

Unknownoptional
exitexit

Exit number

Unknownoptional
espanespan

number of rows the exit number spans—if value=1, omit this parameter. If set, "exit" parameter should be omitted from the other rows it spans

Unknownoptional
roadroad

road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations> ; Generate route shields using {{AUshield}; If there are multiple roads (ie intersecting road changes name at this intersection), use a slash (/) to separate roads; Generate an ndash (–) and wikilinked destinations using {{ACTcity}}, {{NSWcity}}, {{VICcity}} etc; If destinations are to be entered manually, an ndash can be generated by the HTML character code &ndash;

Stringrequired
rspanrspan

number of rows the road cell spans—if value=1, omit this parameter

Unknownoptional
rcspanrcspan

number of columns the road cell spans—if value=1, omit this parameter. if using this parameter, set the "notes" parameter to "none" to avoid the notes cell spilling over the edge of the table.

Unknownoptional
notesnotes

any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.

Unknownsuggested
nspannspan

number of rows the notes spans—if value=1, omit this parameter. If set, the "notes" parameter should be omitted from the other rows it spans.

Unknownoptional
placeplace bridge tunnel

a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.

Unknownoptional
pspanpspan bspan tspan

number of rows the place/bridge/tunnel multicolumn cell spans—if value=1, omit this parameter.

Unknownoptional

See also

edit
  • {{jctname}}, {{AUshield}} and {{WAcity}}, are templates used to generate route shields and wikilinked destinations
  • {{AUSinttop}}, a template that generates a MOS:RJL-compliant header for the junction list
  • {{jctbtm}}, a template that closes the junction list table
  • {{jcttop}}, {{CTint}}, {{ILint}}, {{INint}}, {{MIint}}, {{MNint}}, {{NHint}}, {{NYint}}, {{OHint}}, {{PAint}}, {{VTint}}, {{WIint}} are other templates in the {{Jctint}} suite, used in American road junction lists
  • {{jctbridge}}, a template that generates rows for bridge crossings
  • {{jctco}}, a template that generates rows for counties without junctions
  • {{jctgap}}, a template for generating a row for a gap in the route
  • {{jcttunnel}}, a template that generates rows for tunnel crossings
  • {{jctrestarea}}, a template that generates rows for rest areas, service areas and the like