Talk:Non-maskable interrupt
 | This article is rated Start-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
| |||||||||||
Maskability of NMIs
edit>Some NMIs may be masked, but only by using proprietary methods specific to the particular NMI.
Actually, on AT and compatible chipsets NMI can be disabled if bit 7 of port 70h is high. This is well documented, and a source is here. NMI means the interrupt cannot be disabled by the CLI instruction or by the PIC, there are still other ways to disable it. System86 (talk) 00:13, 30 January 2008 (UTC)
- NMIs are ignored by x86 CPU in SMM mode without using any external PIC/chipset/controllers/etc. There's a way to unmask NMIs in SMM yet: http://www.rcollins.org/ddj/Mar97/Mar97.html#Tbl4 --xrgtn (talk) 12:35, 17 April 2012 (UTC)
Minimum timing between NMIs?
editWhat happens if one NMI arrives while the previous is not completed? Or is this forbidden (and checked using some form of timing analysis)? Dpotop (talk) 14:32, 26 May 2008 (UTC)
ChazZeromus (talk) 01:47, 4 August 2009 (UTC) If your talking about x86 architecture, I do believe it simply task switches. Depending on the type of gate that the interrupt is associated with, a successful forced task switch will take place if operating in protected mode. It's somewhere in the Systems Programming manual from Intel.