Talk:Geology of Minnesota/Archive 1

Latest comment: 17 years ago by Drillerguy in topic A relevant USGS Site

Interesting Fact possibility for this article

edit

The highest point in Minnesota is Eagle Mountain at 2301 feet, the lowest is Lake Superior at 602 feet. The 1699 feet elevation range between highest and lowest point is the 12th smallest of any U.S. state. [1] page 24 Gopher backer 02:58, 5 December 2006 (UTC)Reply

Another interesting fact is that the high and low are only ~12 miles apart, which must be one of the shortest distances between high and low (Hawaii might be a short distace too.) Appraiser 03:14, 5 December 2006 (UTC)Reply
The ref I have says 13, see Minnesota -Ravedave (help name my baby) 05:01, 5 December 2006 (UTC)Reply
I'm a sucker for geotrivia like this. I think the winner may be Delaware, with about 4 or 5 miles from lowest to highest point, if I have it right. Pfly 06:04, 11 December 2006 (UTC)Reply
I'm a sucker too, so I had to check. The high point in Delaware is at Ebright Azimuth, 448 ft. above sea level, 6.5 miles from Wilmington, Delaware. Wilmington is where the Delaware River meets the Delaware Bay, and is listed as 100 ft. above sea level (in the Wilmington article). Clearly, the low point in Delaware would be on the ocean-front in Sussex County at the south end of the state. Towns there include Lewes, Rehoboth, Bethany Beach, and Fenwick Island.
The highest point in Hawaii is at Mauna Kea, which appears to be about 17 miles southwest of the ocean using this map [1].
So, maybe Minnesota does have the record. Appraiser 14:54, 11 December 2006 (UTC)Reply
Looks like the atlantic is the lowpoint in delaware. List_of_U.S._states_by_elevation -Ravedave (help name my baby) 15:49, 11 December 2006 (UTC)Reply
Delaware Bay is at sea level, it is the ocean after all. Perhaps the 100 foot elevation is for someplace inland in Wilmington. In any case, I got my 4-5 miles simply by finding Elbright Azimuth Road in Google Earth and drawing a straight line to the closest sea coast. Pfly 16:58, 11 December 2006 (UTC)Reply

Does the bay level in Wilmington change with the tides? I've been looking around some more and suspect the 100 ft. elevation stated is either wrong or is based on some assumption. It may be the elevation at city hall, or an average, or a high. The Washington, D.C. article has elevation = 0'-410'. I'm pretty sure the mean high tide level of the Potomac in the District is 10' or so higher than the mean high tide at the mouth of the Chesapeake Bay, so I don't think the 0' is correct. But it does point out that an elevation for a city is actually a range. I have Google Earth loaded on one of my other computers, so I'll use it to check some elevations when I get a chance. (It's really cool; you can find your exact house, click next to it, and it will give you long., lat., and elev. for that exact spot.) Appraiser 18:49, 11 December 2006 (UTC)Reply

The USGS GNIS gives the elevation of Delaware Bay at a surprising -36 feet - http://geonames.usgs.gov/pls/gnispublic/f?p=151:3:13584473078477894291::NO::P3_FID:216373 .. but Google Earth shows the bay, even up near Wilmington, to be zero feet. The USGS GNIS also gives Wilmington's elevation at 100 feet, but you can see from where its point of reference is that it isn't on the coast but on a hilltop: http://www.topozone.com/map.asp?lat=39.74583&lon=-75.54694 .. ..anyway Delaware always wins these kind of superlative contests.. it's so small and flat! (even so, if Minnesota's highest and lowest points are that close, for a state that large, it is interesting (if a bit esoteric) geotrivia, even if its not the #1 state for such a thing. Personally I think there are too many superlative claims on wikipedia already. :-) Pfly 19:54, 11 December 2006 (UTC)Reply
I agree - too much useless trivia on Wikipedia. The topic just piqued my curiosity. I'll accept that any shoreline on a body of water that is affected by tides and attached to an ocean is at zero elevation, even though I believe there are differences (like from the Potomac in DC to the open-ocean), but I think the -36' for the Delaware Bay is incorrect. GNIS shows the beach at Bethany Beach to be 0', and Delaware Bay is certainly not lower than that. So, I'd say Delaware does have the shortest distance between the high and the low. Hawaii certainly has the most dramatic change in elevation in a short distance. If Delaware is small and flat, Minnesota is large and flat. I heard one time that proportionately, Kansas is flatter than a thin-crusted pizza. I'm glad Minnesota has a hill here and there. Appraiser 21:31, 11 December 2006 (UTC)Reply
Washington is pretty dramatic too, with Mount Rainier only about 40 miles from sea level at Puget Sound, about a 14,400 foot change. Definitely dramatic, I used to work in Tacoma. Adding to the pile of useless trivia, Pierce County gets to claim the largest elevation change within a county's borders, not counting Alaska. I hadn't heard the bit about the Potomac at DC being higher than sea level, now my curiosity is piqued. But we're in agreement that this is all quite trivial! Mmmm, pizza.. Pfly 23:32, 11 December 2006 (UTC)Reply

Watersheds

edit
 
Watersheds of Minnesota
 
MNRiverBasins

Would this pic be useful for this article?-Ravedave 01:24, 25 June 2007 (UTC)Reply

Possibly. The article needs an image of the regions. I was going to mark up the present image at the top but might use this one instead.Kablammo 03:04, 25 June 2007 (UTC)Reply
I like the watersheds map, but I'm not sure that it is germane to "geology". Here, I'd rather see a map showing underlying limestone, granite, etc.--Appraiser 20:45, 25 June 2007 (UTC)Reply
I'll revised the watershed map to lose the SD and IA parts, remove the freeways, and differentiate between the Des Moines River watershed and that of the Mississippi below St. Paul (which are colored the same in the version to the right). I'll put the revised version on Commons in the next day or so. I may add it to this article as a placeholder until we get a regional map. And we do need a bedrock map. There are several on line but I don't know of a free one. Kablammo 21:06, 25 June 2007 (UTC)Reply
USGS should have at least some free online... [2] ? -Ravedave
Small ones can easily be made here: [3] (see license here) select some of the geological overlays. Larger maps could maybe be made by taking a bunch of screen shots and stitching them together. (automatically? )-Ravedave 22:28, 25 June 2007 (UTC)Reply
I've rummaged through these before and can't find any US bedrock geology maps. Lots of other data, but none either of basement or first encountered bedrock. Kablammo 22:45, 25 June 2007 (UTC)Reply

The map has been revised as discussed above, and colors changed to group basins within major watersheds together by variations of the a common base color for each major watershed. It could be modified to accommodate an outline of the geological regions, but that might get too busy. A blank map with significant glacial features (especially terminal moraines) would be better for the regions. I've posted this map at the map section of Portal:Minnesota for use elsewhere. Perhaps eventually there will be a Geography of Minnesota article. Kablammo 17:03, 27 June 2007 (UTC)Reply

Geology maps

edit

MNDOT has simplified maps of bedrock and quaternary geology http://www.mrr.dot.state.mn.us/geotechnical/geology/bedrckweb.pdf http://www.mrr.dot.state.mn.us/geotechnical/geology/quaterweb.pdf

I am not sure of their copyright policy. Drillerguy 19:39, 25 June 2007 (UTC)Reply

I am pretty sure MN state stuff is not under a public license, unfortunatly. -Ravedave 20:30, 25 June 2007 (UTC)Reply

A relevant USGS Site

edit

I could have sworn I saw a regional bedrock geology map associated with this website.

http://vulcan.wr.usgs.gov/LivingWith/VolcanicPast/Places/volcanic_past_minnesota.html

Drillerguy 13:38, 29 June 2007 (UTC)Reply

  1. ^ Keen, Richard (1992). Minnesota Weather. American and World Geographic Publishing. ISBN 1560370009. {{cite book}}: Unknown parameter |middle= ignored (help)