Sodium hydrosulfide

(Redirected from Sodium sulfhydrate)

Sodium hydrosulfide is the chemical compound with the formula NaSH. This compound is the product of the half-neutralization of hydrogen sulfide (H2S) with sodium hydroxide (NaOH). NaSH and sodium sulfide are used industrially, often for similar purposes. Solid NaSH is colorless. The solid has an odor of H2S owing to hydrolysis by atmospheric moisture. In contrast with sodium sulfide (Na2S), which is insoluble in organic solvents, NaSH, being a 1:1 electrolyte, is more soluble.

Sodium hydrosulfide
Names
IUPAC name
Sodium hydrosulfide
Other names
Sodium bisulfide
Sodium sulfhydrate
Sodium hydrogen sulfide
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.037.056 Edit this at Wikidata
EC Number
  • 240-778-0
RTECS number
  • WE1900000
UNII
UN number 2922 2318
  • InChI=1S/Na.H2S/h;1H2/q+1;/p-1 checkY
    Key: HYHCSLBZRBJJCH-UHFFFAOYSA-M checkY
  • InChI=1/Na.H2S/h;1H2/q+1;/p-1
    Key: HYHCSLBZRBJJCH-REWHXWOFAV
  • [Na+].[SH-]
Properties
NaSH
Molar mass 56.063 g/mol
Appearance off-white solid, deliquescent
Density 1.79 g/cm3
Melting point 350.1 °C (662.2 °F; 623.2 K) (anhydrous)
55 °C (dihydrate)
22 °C (trihydrate)
50 g/100 mL (22 °C)
Solubility Soluble in alcohol, ether
Structure
rhombohedral
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Flammable solid, stench, reacts with acids to release hydrogen sulfide
GHS labelling:
GHS02: FlammableGHS05: CorrosiveGHS06: ToxicGHS09: Environmental hazard
Danger
H226, H251, H290, H301, H314, H400
P210, P233, P234, P235+P410, P240, P241, P242, P243, P260, P264, P270, P273, P280, P301+P310, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P330, P363, P370+P378, P390, P391, P403+P235, P404, P405, P407, P413, P420, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability (yellow): no hazard codeSpecial hazards (white): no code
3
2
Flash point 90 °C (194 °F; 363 K)
Safety data sheet (SDS) TDC MSDS
Related compounds
Other anions
Sodium hydroxide
Sodium amide
Other cations
Ammonium hydrosulfide
Related compounds
Sodium sulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Structure and properties

edit

Crystalline NaHS undergoes two phase transitions. At temperatures above 360 K, NaSH adopts the NaCl structure, which implies that the HS behaves as a spherical anion owing to its rapid rotation, leading to equal occupancy of eight equivalent positions. Below 360 K, a rhombohedral structure forms, and the HS sweeps out a discoidal shape. Below 114 K, the structure becomes monoclinic. The analogous rubidium and potassium compounds behave similarly.[1]

NaSH has a relatively low melting point of 350 °C. In addition to the aforementioned anhydrous forms, it can be obtained as two different hydrates, NaSH·2H2O and NaSH·3H2O. These three species are all colorless and behave similarly, but not identically. It can be used to precipitate other metal hydrosulfides, by treatment of aqueous solutions of their salts with sodium hydrosulfide. It is analogous to sodium hydroxide, and is a strong base.

Preparation

edit

One laboratory synthesis entails treatment of sodium ethoxide (NaOEt) with hydrogen sulfide:[2]

NaOCH2CH3 + H2S → NaSH + CH3CH2OH

An alternative method involves reaction of sodium with hydrogen sulfide.[3]

Applications

edit

Thousands of tons of NaSH are produced annually. Its main uses are in cloth and paper manufacture as a makeup chemical for sulfur used in the kraft process, as a flotation agent in copper mining where it is used to activate oxide mineral species, and in the leather industry for the removal of hair from hides.[4]

References

edit
  1. ^ Haarmann, F.; Jacobs, H.; Roessler, E.; Senker, J. (2002). "Dynamics of anions and cations in hydrogensulfides of alkali metals (NaHS, KHS, RbHS): A proton nuclear magnetic resonance study". J. Chem. Phys. 117 (3): 1269–1276. Bibcode:2002JChPh.117.1269H. doi:10.1063/1.1483860.
  2. ^ Eibeck, R. I. (1963). "Sodium Hydrogen Sulfide". Inorganic Syntheses. Inorganic Syntheses. Vol. 7. pp. 128–31. doi:10.1002/9780470132388.ch35. ISBN 9780470132388.
  3. ^ Pavlik, Jeffrey W.; Noll, Bruce C.; Oliver, Allen G.; Schulz, Charles E.; Scheidt, W. Robert (2010). "Hydrosulfide (HS) Coordination in Iron Porphyrinates". Inorganic Chemistry. 49 (3): 1017–1026. doi:10.1021/ic901853p. PMC 2811220. PMID 20038134.
  4. ^ Butts, David; Bush, David R.; Updated By Staff (2013). "Sodium Sulfates and Sulfides". Kirk-Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.1915040902212020.a01.pub3. ISBN 978-0471238966.