Smith & Wesson Model 586

(Redirected from S&W Model 581)

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

Smith & Wesson Model 586
586-7 Revolver with 7-round capacity and factory wood grips and hammer lock
TypeRevolver
Place of originUnited States
Production history
ManufacturerSmith & Wesson
Produced1981–1999
2012–present
Variants586-(1 through 8)
686 (stainless steel)
Specifications
Cartridge.357 Magnum
.38 Special
ActionDouble action and single action
Feed system6-round or 7-round cylinder
SightsAdjustable rear open sights
Smith & Wesson 586-1 with 6 inch barrel

Description

edit

In addition to being able to chamber and fire .357 Magnum cartridges, the 586 will chamber and fire .38 Special cartridges as well as .38 Special +P (overpressure ammunition). The 586 has been available with 2+12, 3, 4, 6, and 8+38 in (64, 76, 102, 153, and 214 mm) barrel lengths as standard models and other barrel lengths either by special order from S&W's Performance Center custom shop, or acquired from or built by after-market gunsmiths.[1] The barrel has a twist rate of 1/18.75 for the 158 grain bullet.[citation needed]

The Model 586 uses S&W's 'L' (medium) revolver frame, with a K-frame-sized grip mated to a larger diameter cylinder. During the 1980s, Smith & Wesson developed its L-frame line of .357 Magnums: the Smith & Wesson Model 581, Model 586, Smith & Wesson Model 681, and Model 686. The Model 581 had a fixed notch type rear sight, whereas the 586 used a target style adjustable rear sight. These handguns had a major effect on both law enforcement and sporting markets. The 586 was introduced in 1980, while the 581 was discontinued in 1988.[1]

The K-frame guns, though popular with police departments, were felt to be too light for full-power .357 ammunition, and a heavier and more durable gun was desired, in the same frame size. (This would avoid the complaints attaching to the larger, heavier N-frame Model 29 and Model 58.[2]) Designed with input from official S&W historian Roy Jinks, the L-frame was the result, and it quickly gained praise from policemen and hunters.[1]

The 586 was discontinued in 1999. After a 13-year absence, it was reintroduced in 2012 with the aforementioned safety modifications, plus an improved yoke, as the 586-8 variant.[1] These are produced with 4-inch (100 mm) and 6-inch (150 mm) barrel lengths, as part of Smith & Wesson's Classic line of revolvers.

Controversy rose when Smith & Wesson cooperated with the Clinton administration to modify their line of revolvers with an internal locking mechanism, colloquially dubbed the "Hillary Hole", and other changes. That agreement resulted in a boycott by many firearms enthusiasts, which led to a dramatic drop in stock price, and nearly bankrupted the company. Smith & Wesson was sold to Saf-T-Hammer for a fraction of its true value.[3]

Engineering and production changes[4]

edit
  • 586 (no dash), 1981 Introduction model
  • 586-1, 1986 radius stud package, floating hand
  • 586-M, 1987 Product warning by S&W: M over stamped to signify a modification by factory or warranty station for 586 and 586-1
  • 586-2, 1987 changed hammer nose, bushing and associated parts
  • 586-3, 1988 new yoke retention system
  • 586-4, 1993 change rear sight leaf, drill and tap frame, change extractor, Hogue grips
  • 586-5, 1997 delete 8+38 in (210 mm) barrel/change to MIM thumbpiece/Ship with Master trigger locks
  • 586-6, 1997 change frame design to eliminate cylinder stop stud, eliminate serrated tangs, MIM hammer and trigger, change to internal lock.
  • 586-7, 2004 Performance Center .38 Super, 6-Shot unfluted cylinder, 4 in (100 mm) barrel, Stainless Steel, 250 Made, seven shot with internal lock
  • 586-8, 2012 Reintroduction as a Classic Series with internal lock 6-shot 4 in (100 mm) and 6 in (150 mm) RR, WO TS SB

Recall

edit

In 1987, seven years after the release of the Model 686, there were reports of cylinder binding with some types of standard .357 Magnum ammunition for L-frame revolvers manufactured before August 1987. S&W published a product warning and authorized free modification to the revolver. All affected revolvers repaired for this recall were stamped with an M on the yoke near the model number. Thus it is known as the M modification for all 686, 686-1, 586, and 586-1 revolvers.[5]

References

edit
  1. ^ a b c d Supica, Jim; Nahas, Richard (2006). Standard Catalog of Smith & Wesson (3rd ed.). Iola, WI: Gun Digest Books.[page needed]
  2. ^ Grandpa Willie (2001). "Smith & Wesson's .41 Magnum". Free Patriot. Archived from the original on 2008-02-14. Retrieved August 6, 2008.
  3. ^ Austin, Christina (January 21, 2013). "How Gun Maker Smith & Wesson Almost Went Out Of Business When It Accepted Gun Control". Business Insider.
  4. ^ Supica, Jim; Nahas, Richard (2016). Standard Catalog of Smith and Wesson (4th ed.). Iola, WI: Gun Digest. p. 298. ISBN 978-1-4402-4563-3. Retrieved 6 January 2020.
  5. ^ Smith & Wesson (January 1988). "Product Warning". Popular Mechanics. 165 (1): 11.