The offset figure-eight bend is a poor knot that has been implicated in the deaths of several rock climbers.[1][3][4] The knot may capsize (invert) under load, as shown in the figure, and this can happen repeatedly.[5] Each inversion reduces the lengths of the tails. Once the tails are used up completely, the knot comes undone.
| Offset figure-eight bend | |
|---|---|
 | |
| Names | Offset figure-eight bend, flat figure-eight bend[1], abnormal figure-eight bend[2] |
More secure knots for this purpose are the Flemish bend (the "figure eight bend"), (doubled) offset overhand bend, or double fisherman's knot.
See also edit
References edit
- ^ a b Moyer, Tom (1999-11-09). "Pull Tests of the "Euro Death-Knot"". Rope and Gear Testing. Retrieved 2018-07-10.
- ^ "Rock Climbing Tech Tips: Joining Two Ropes". Chockstone.org. Retrieved 2018-07-10.
- ^ "Rappel Knot Fails, Climber Falls to Death on the Goat Wall". Rock and Ice. Retrieved 2018-07-10.
- ^ "Fall on Rock, Failure of Rappel-Knot Came Undone, No Hard Hat, West Virginia, Seneca Rocks". Accidents in North American Mountaineering. The American Alpine Club. 1995.
- ^ Dahlberg, Robin. "Cross load test of common climbing knots". Vimeo. 0:08-0:35. Retrieved 2020-06-10.
 | This knot-related article is a stub. You can help Wikipedia by expanding it. |