This article needs additional citations for verification. (April 2015) (Learn how and when to remove this template message)
The mellophone is a three-valved brass instrument pitched in the key of F or E♭. It has a conical bore, like that of the euphonium and flugelhorn. The mellophone is used as the middle-voiced brass instrument in marching bands and drum and bugle corps in place of French horns, and can also be used to play French horn parts in concert bands and orchestras.
|Other names||en: Mellophonium, tenor cor, fr: cor alto, de: Altkorno, Alt-Corno, it: genis corno|
|fifth lower than written|
These instruments are used instead of French horns for marching because their bells face forward instead of to the back (or to the side), as dissipation of the sound becomes a concern in the open-air environment of marching. Tuning is done solely by adjusting the tuning slide, unlike the French horn where the pitch is affected by the hand position in the bell. Fingerings for the mellophone are the same as fingerings for the trumpet, alto (tenor) horn, and most valved brass instruments. Owing to its use primarily outside concert music, there is little solo literature for the mellophone, other than that used within drum and bugle corps.
The present-day mellophone has three valves, operated with the right hand. Mellophone fingering is the same as the french horn or trumpet, depending on which key it is in. It is typically pitched lower, in the key of F or E♭. The overtone series of the F mellophone is an octave above that of the F horn. The tubing length of a mellophone is the same as that of the F-alto (high) single horn or the F-alto (high) branch of a triple horn or double-descant horn.
The direction of the bell as well as the much-reduced amount of tubing (compared to a French horn) make the mellophone look like a large trumpet. The mellophone uses the same mouthpiece as the alto (tenor) horn, which is in between the size of a trombone and trumpet mouthpiece. This mouthpiece usually has a deep cup, like that of the flugelhorn, and has a wider inner diameter than a trumpet mouthpiece. These mouthpieces give the mellophone a dark, round sound. Some trumpet players who double on mellophone use a trumpet-style parabolic ("cup") mouthpiece on the instrument, resulting in a much brighter, more trumpet-like sound. Horn players doubling on mellophone often use a smaller, lighter, conical ("funnel") mouthpiece, as used on French horns, with an adapter to allow them to fit in the larger-bore leadpipe of the mellophone. This style mouthpiece gives the instrument a warmer sound than using a trumpet mouthpiece, and allows French horn players to play the mellophone without changing their embouchure between the two instruments.
Two instruments carry the name mellophone:
- Traditional mellophones with a rear or sideways facing bell similar to the french horn.
- The marching mellophone, with a forward-facing bell.
In general, the mellophone has its origin in the horn design boom of the 19th century. The earliest version was the Koenig horn, based on a design by Herman Koenig, but manufactured by Antoine Courtois, who may also have played a significant role in its design. Courtois had just won the right to manufacture the saxhorn, in a lawsuit against the inventor of the saxophone, Adolphe Sax. The Koenig horn had three piston valves — the kind used on a modern trumpet, which were a relatively new technology at that time — and was otherwise shaped somewhat like a modern French horn, but smaller. This shape was largely influenced by the post horn.
Köhler & Son originally began using the name "mellophone" for its line of horns based loosely on similar instruments by Distin. These were also post horn-like instruments with valves, but the mouthpieces and bell angle were slowly evolving to allow for more projection and control of sound with the technology of valves.
The traditional instrument is visually modeled on the horn, with a round shape and a rear-facing bell. Unlike French horns, it is played with the right hand, and the bell points to the rear left of the player. It was used as an alto voice both outdoors and indoors by community and school bands in place of the French horn. The manufacture of these instruments declined significantly in the mid-twentieth century, and they are rarely in use today.
Mellophone bugles keyed in G were manufactured for American drum and bugle corps from approximately the 1950s until around 2000 when Drum Corps International changed the rules to allow brass instruments in any key; however, Kanstul and Dynasty still make them in small quantities.
Difference from the hornEdit
This section does not cite any sources. (May 2015) (Learn how and when to remove this template message)
The marching mellophone is used in place of the horn for marching because it is a bell-front instrument allowing projection of the sound in the direction that the player is facing. This is especially important in drum corps and marching bands because the audience is typically on only one side of the band. There are also marching B♭ French horns with a bell-front configuration. Mellophones are usually constructed with a smaller bore for louder volume than marching French horns. Marching B♭ horns do use a horn mouthpiece and have a more French horn-like sound but are more difficult to play accurately on the field.
Another factor in the greater use of mellophones is its ease of use as compared to the difficulty of playing a French horn consistently well. In a French horn, the length of tubing (and the bore size) make the partials much closer together than other brass instruments in their normal range and, therefore, harder to play accurately. The F mellophone has tubing half the length of a French horn, which gives it an overtone series more similar to a trumpet and most other brass instruments.
In summary, the mellophone is an instrument designed specifically to bring the approximate sound of a horn in a package which is conducive to playing while marching. Outside a marching setting, the traditional French horn is ubiquitous and the mellophone is rarely used, though they can be used to play French horn parts in a concert band or orchestra.
Stan Kenton's instrumentEdit
C.G. Conn developed its 16E "Mellophonium" and first marketed it in 1957. Kenton himself was not involved in the design of the mellophonium; in 1961, however, he provided an endorsement for Conn's advertising upon adopting the instrument. Kenton had for several years wished to add another brass voice alongside his trumpets and trombones and experimented unsuccessfully with additional instruments before discovering the Conn Mellophonium which bridged the gap he was seeking to fill:
"For some time, I recognized the need for using an instrument that would not only give the orchestra another solo voice, but would add more warmth and emphasis to the thematic line. The Mellophonium has not only met all the preliminary requirements, but has also suggested intriguing new ways to shade and dramatize sound. My decision to use four Mellophoniums didn’t just happen overnight. Nor are they gimmick instruments. Both the arranging staff and myself realized the need for an instrument that would capture the width of sound that virtually lay untouched between the trumpets and trombones. We first tried ten trumpets—five B flat and five E flat. They didn’t make it because it was impossible to distinguish any difference between the two instruments....After experimenting for two days with the flugelhorn, we were ready to give it up completely! Finally, the Conn Instrument Corporation learned that we were interested in locating a new brass instrument and asked us to try the mellophonium. After much experimentation and many preliminary rehearsals, the Mellophonium became the answer we had been looking for.
The instrument could be played by a trumpet player with relative ease, though most Mellophonium players in Kenton's band were reluctant users of the instrument due to its difficulty to play in tune particularly in the higher registers.  Kenton used a four-man mellophonium section September 1960 through November 1963 on 11 albums; two of those LPs received Grammy Awards (Kenton's West Side Story and Adventures In Jazz).
The Vincent Bach Corporation also produced a mellophonium, with the shape of the tubing more reminiscent of the cornet.
F. E. Olds instrumentEdit
The Holton company manufactured mellophoniums with a trumpet like lead pipe and valve assembly with the rest being comparable to a mellophonium.
- Arnold Myers. "Mellophone". In Deane L. Root (ed.). Grove Music Online. Oxford Music Online. Oxford University Press. (subscription required)
- Mellophone mouthpieces
- The History of the Mellophone
Courtois came out with an instrument that bore the name of a virtuoso cornetist and instrument builder named Herman Koenig, this instrument being called the Koenig horn. Koenig’s role is uncertain- he was a very good instrument builder in his own right, but it is also possible that the instruments were built by Courtois at a suggestion or request by Koenig, or the two men may have worked together on the instrument.
- "Stan explains his new sound." Crescendo, August 1962, 4.
- Sparke, Michael (2010). "Stan Kenton: This Is An Orchestra". University of North Texas Press. ISBN 1-57441-284-1.
- Lillian Arganian, Stan Kenton: The Man and His Music (East Lansing: Artistry Press, 1989): 141. ISBN 9780962111600; Wayne Corey, "Stan Kenton’s Mellophonium Sound Reborn", Jazz Times (18 September 2012); Scooter Pirtle "The Stan Kenton Mellophoniums", The Middle Horn Leader (May 1993, accessed 28 May 2015); Michael Sparke, Stan Kenton: This Is an Orchestra!, North Texas Lives of Musicians 5 (Denton: University of North Texas Press, 2010): 170–80. ISBN 978-1-57441-284-0.
|Wikimedia Commons has media related to Mellophones.|
- The Middle Horn Leader
- Al's Mellophone Page, including MelloCast podcast
- The Mello Zone - blog by John Ericson, associate professor of horn at ASU
- Photographs of pre-1960 instruments manufactured by Conn, shown at the Conn Loyalist website