Suppose M is an m-dimensional manifold and that (E, π, M) is a fiber bundle. For p ∈ M, let Γ(p) denote the set of all local sections whose domain contains p. Let be a multi-index (an m-tuple of integers, not necessarily in ascending order), then define:
Define the local sections σ, η ∈ Γ(p) to have the same r-jet at p if
The relation that two maps have the same r-jet is an equivalence relation. An r-jet is an equivalence class under this relation, and the r-jet with representative σ is denoted . The integer r is also called the order of the jet, p is its source and σ(p) is its target.
Since the atlas on each Jr(π) defines a manifold, the triples (Jr(π), πr,k, Jk(π)), (Jr(π), πr,0, E) and (Jr(π), πr, M) all define fibered manifolds. In particular, if (E, π, M) is a fiber bundle, the triple (Jr(π), πr, M) defines the r-th jet bundle of π.
If W ⊂ M is an open submanifold, then
If p ∈ M, then the fiber is denoted .
Let σ be a local section of π with domain W ⊂ M. The r-th jet prolongation of σ is the map jrσ: W → Jr(π) defined by
Note that πr o jrσ = idW, so jrσ really is a section. In local coordinates, jrσ is given by
If π is the trivial bundle (M × R, pr1, M), then there is a canonical diffeomorphism between the first jet bundle J1(π) and T*M × R. To construct this diffeomorphism, for each σ in ΓM(π) write .
Then, whenever p ∈ M
Consequently, the mapping
is well-defined and is clearly injective. Writing it out in coordinates shows that it is a diffeomorphism, because if (xi, u) are coordinates on M × R, where u = idR is the identity coordinate, then the derivative coordinates ui on J1(π) correspond to the coordinates ∂i on T*M.
Likewise, if π is the trivial bundle (R × M, pr1, R), then there exists a canonical diffeomorphism between J1(π) and R × TM.
The space Jr(π) carries a natural distribution, that is, a sub-bundle of the tangent bundleTJr(π)), called the Cartan distribution. The Cartan distribution is spanned by all tangent planes to graphs of holonomic sections; that is, sections of the form jrφ for φ a section of π.
The annihilator of the Cartan distribution is a space of differential one-forms called contact forms, on Jr(π). The space of differential one-forms on Jr(π) is denoted by and the space of contact forms is denoted by . A one form is a contact form provided its pullback along every prolongation is zero. In other words, is a contact form if and only if
for all local sections σ of π over M.
The Cartan distribution is the main geometrical structure on jet spaces and plays an important role in the geometric theory of partial differential equations. The Cartan distributions are completely non-integrable. In particular, they are not involutive. The dimension of the Cartan distribution grows with the order of the jet space. However, on the space of infinite jets J∞ the Cartan distribution becomes involutive and finite-dimensional: its dimension coincides with the dimension of the base manifold M.
Consider the case (E, π, M), where E ≃ R2 and M ≃ R. Then, (J1(π), π, M) defines the first jet bundle, and may be coordinated by (x, u, u1), where
for all p ∈ M and σ in Γp(π). A general 1-form on J1(π) takes the form
A section σ in Γp(π) has first prolongation
Hence, (j1σ)*θ can be calculated as
This will vanish for all sections σ if and only if c = 0 and a = −bσ′(x). Hence, θ = b(x, u, u1)θ0 must necessarily be a multiple of the basic contact form θ0 = du − u1dx. Proceeding to the second jet space J2(π) with additional coordinate u2, such that
a general 1-form has the construction
This is a contact form if and only if
which implies that e = 0 and a = −bσ′(x) − cσ′′(x). Therefore, θ is a contact form if and only if
where θ1 = du1 − u2dx is the next basic contact form (Note that here we are identifying the form θ0 with its pull-back to J2(π)).
In general, providing x, u ∈ R, a contact form on Jr+1(π) can be written as a linear combination of the basic contact forms
Similar arguments lead to a complete characterization of all contact forms.
In local coordinates, every contact one-form on Jr+1(π) can be written as a linear combination
with smooth coefficients of the basic contact forms
|I| is known as the order of the contact form . Note that contact forms on Jr+1(π) have orders at most r. Contact forms provide a characterization of those local sections of πr+1 which are prolongations of sections of π.
Let ψ ∈ ΓW(πr+1), then ψ = jr+1σ where σ ∈ ΓW(π) if and only if
A local diffeomorphism ψ : Jr(π) → Jr(π) defines a contact transformation of order r if it preserves the contact ideal, meaning that if θ is any contact form on Jr(π), then ψ*θ is also a contact form.
The flow generated by a vector field Vr on the jet space Jr(π) forms a one-parameter group of contact transformations if and only if the Lie derivative of any contact form θ preserves the contact ideal.
Let us begin with the first order case. Consider a general vector field V1 on J1(π), given by
We now apply to the basic contact forms and expand the exterior derivative of the functions in terms of their coordinates to obtain:
Therefore, V1 determines a contact transformation if and only if the coefficients of dxi and in the formula vanish. The latter requirements imply the contact conditions
The former requirements provide explicit formulae for the coefficients of the first derivative terms in V1:
denotes the zeroth order truncation of the total derivative Di.
Thus, the contact conditions uniquely prescribe the prolongation of any point or contact vector field. That is, if satisfies these equations, Vr is called the r-th prolongation of V to a vector field on Jr(π).
These results are best understood when applied to a particular example. Hence, let us examine the following.
Consider the case (E, π, M), where E ≅ R2 and M ≃ R. Then, (J1(π), π, E) defines the first jet bundle, and may be coordinated by (x, u, u1), where
for all p ∈ M and σ in Γp(π). A contact form on J1(π) has the form
Consider a vector V on E, having the form
Then, the first prolongation of this vector field to J1(π) is
If we now take the Lie derivative of the contact form with respect to this prolonged vector field, we obtain
Hence, for preservation of the contact ideal, we require
And so the first prolongation of V to a vector field on J1(π) is
Let us also calculate the second prolongation of V to a vector field on J2(π). We have as coordinates on J2(π). Hence, the prolonged vector has the form
The contact forms are
To preserve the contact ideal, we require
Now, θ has no u2 dependency. Hence, from this equation we will pick up the formula for ρ, which will necessarily be the same result as we found for V1. Therefore, the problem is analogous to prolonging the vector field V1 to J2(π). That is to say, we may generate the r-th prolongation of a vector field by recursively applying the Lie derivative of the contact forms with respect to the prolonged vector fields, r times. So, we have
Therefore, the Lie derivative of the second contact form with respect to V2 is
Hence, for to preserve the contact ideal, we require
And so the second prolongation of V to a vector field on J2(π) is
Note that the first prolongation of V can be recovered by omitting the second derivative terms in V2, or by projecting back to J1(π).
The inverse limit of the sequence of projections gives rise to the infinite jet spaceJ∞(π). A point is the equivalence class of sections of π that have the same k-jet in p as σ for all values of k. The natural projection π∞ maps into p.
Just by thinking in terms of coordinates, J∞(π) appears to be an infinite-dimensional geometric object. In fact, the simplest way of introducing a differentiable structure on J∞(π), not relying on differentiable charts, is given by the differential calculus over commutative algebras. Dual to the sequence of projections of manifolds is the sequence of injections of commutative algebras. Let's denote simply by . Take now the direct limit of the 's. It will be a commutative algebra, which can be assumed to be the smooth functions algebra over the geometric object J∞(π). Observe that , being born as a direct limit, carries an additional structure: it is a filtered commutative algebra.
Roughly speaking, a concrete element will always belong to some , so it is a smooth function on the finite-dimensional manifold Jk(π) in the usual sense.
Given a k-th order system of PDEs E ⊆ Jk(π), the collection I(E) of vanishing on E smooth functions on J∞(π) is an ideal in the algebra , and hence in the direct limit too.
Enhance I(E) by adding all the possible compositions of total derivatives applied to all its elements. This way we get a new ideal I of which is now closed under the operation of taking total derivative. The submanifold E(∞) of J∞(π) cut out by I is called the infinite prolongation of E.
Geometrically, E(∞) is the manifold of formal solutions of E. A point of E(∞) can be easily seen to be represented by a section σ whose k-jet's graph is tangent to E at the point with arbitrarily high order of tangency.
Analytically, if E is given by φ = 0, a formal solution can be understood as the set of Taylor coefficients of a section σ in a point p that make vanish the Taylor series of at the point p.
Most importantly, the closure properties of I imply that E(∞) is tangent to the infinite-order contact structure on J∞(π), so that by restricting to E(∞) one gets the diffiety, and can study the associated Vinogradov (C-spectral) sequence.
This article has defined jets of local sections of a bundle, but it is possible to define jets of functions f: M → N, where M and N are manifolds; the jet of f then just corresponds to the jet of the section
grf: M → M × N
grf(p) = (p, f(p))
(grf is known as the graph of the function f) of the trivial bundle (M × N, π1, M). However, this restriction does not simplify the theory, as the global triviality of π does not imply the global triviality of π1.
Ehresmann, C., "Introduction à la théorie des structures infinitésimales et des pseudo-groupes de Lie." Geometrie Differentielle, Colloq. Inter. du Centre Nat. de la Recherche Scientifique, Strasbourg, 1953, 97-127.