Zero-forcing precoding

Zero-forcing (or null-steering) precoding is a method of spatial signal processing by which a multiple antenna transmitter can null the multiuser interference in a multi-user MIMO wireless communication system.[1] When the channel state information is perfectly known at the transmitter, the zero-forcing precoder is given by the pseudo-inverse of the channel matrix. Zero-forcing has been used in LTE mobile networks.[2]

Mathematical description

edit

In a multiple antenna downlink system which comprises   transmit antenna access points and   single receive antenna users, such that  , the received signal of user   is described as

 

where   is the   vector of transmitted symbols,   is the noise signal,   is the   channel vector and   is some   linear precoding vector. Here   is the matrix transpose,   is the square root of transmit power, and   is the message signal with zero mean and variance  .

The above signal model can be more compactly re-written as

 

where

  is the   received signal vector,
  is   channel matrix,
  is the   precoding matrix,
  is a   diagonal power matrix, and
  is the   transmit signal.

A zero-forcing precoder is defined as a precoder where   intended for user   is orthogonal to every channel vector   associated with users   where  . That is,

 

Thus the interference caused by the signal meant for one user is effectively nullified for rest of the users via zero-forcing precoder.

From the fact that each beam generated by zero-forcing precoder is orthogonal to all the other user channel vectors, one can rewrite the received signal as

 

The orthogonality condition can be expressed in matrix form as

 

where   is some   diagonal matrix. Typically,   is selected to be an identity matrix. This makes   the right Moore-Penrose pseudo-inverse of   given by

 

Given this zero-forcing precoder design, the received signal at each user is decoupled from each other as

 

Quantify the feedback amount

edit

Quantify the amount of the feedback resource required to maintain at least a given throughput performance gap between zero-forcing with perfect feedback and with limited feedback, i.e.,

  .

Jindal showed that the required feedback bits of a spatially uncorrelated channel should be scaled according to SNR of the downlink channel, which is given by:[3]

 

where M is the number of transmit antennas and   is the SNR of the downlink channel.

To feed back B bits though the uplink channel, the throughput performance of the uplink channel should be larger than or equal to 'B'

 

where   is the feedback resource consisted of multiplying the feedback frequency resource and the frequency temporal resource subsequently and   is SNR of the feedback channel. Then, the required feedback resource to satisfy   is

 .

Note that differently from the feedback bits case, the required feedback resource is a function of both downlink and uplink channel conditions. It is reasonable to include the uplink channel status in the calculation of the feedback resource since the uplink channel status determines the capacity, i.e., bits/second per unit frequency band (Hz), of the feedback link. Consider a case when SNR of the downlink and uplink are proportion such that   is constant and both SNRs are sufficiently high. Then, the feedback resource will be only proportional to the number of transmit antennas

 .

It follows from the above equation that the feedback resource ( ) is not necessary to scale according to SNR of the downlink channel, which is almost contradict to the case of the feedback bits. One, hence, sees that the whole systematic analysis can reverse the facts resulted from each reductioned situation.

Performance

edit

If the transmitter knows the downlink channel state information (CSI) perfectly, ZF-precoding can achieve almost the system capacity when the number of users is large. On the other hand, with limited channel state information at the transmitter (CSIT) the performance of ZF-precoding decreases depending on the accuracy of CSIT. ZF-precoding requires the significant feedback overhead with respect to signal-to-noise-ratio (SNR) so as to achieve the full multiplexing gain.[3] Inaccurate CSIT results in the significant throughput loss because of residual multiuser interferences. Multiuser interferences remain since they can not be nulled with beams generated by imperfect CSIT.

See also

edit

References

edit
  1. ^ Yoo, Taesang; Goldsmith, Andrea J. (2005). "Optimality of zero-forcing beamforming with multiuser diversity". IEEE International Conference on Communications, 2005. Vol. 1. Seoul, Korea (South): IEEE. pp. 542–546. doi:10.1109/ICC.2005.1494410. ISBN 978-0-7803-8938-0.
  2. ^ Aslan, Yanki; Roederer, Antoine; Fonseca, Nelson; Angeletti, Piero; Yarovoy, Alexander (Oct 2021). "Orthogonal Versus Zero-Forced Beamforming in Multibeam Antenna Systems: Review and Challenges for Future Wireless Networks". IEEE Journal of Microwaves. 1 (4): 879–901. doi:10.1109/JMW.2021.3109244. ISSN 2692-8388.
  3. ^ a b Jindal, Nihar (Nov 2006). "MIMO Broadcast Channels with Finite Rate Feedback". IEEE Transactions on Information Theory. 52 (11): 5045–5059. arXiv:cs/0603065. doi:10.1109/TIT.2006.883550. S2CID 265096041.
edit