The XIX Art is a Swiss single-place paraglider that was designed by Michi Kobler and produced by XIX GmbH of Kronbühl in the mid-2000s. It is now out of production.[1]

Art
Role Paraglider
National origin Switzerland
Manufacturer XIX GmbH
Designer Michi Kobler
Status Production completed
Produced mid-2000s

Design and development

edit

The Art was designed as a beginner to intermediate glider. The models are each named for their approximate projected wing area in square metres, plus relative size.[1]

Variants

edit
Art XS 22
Extra small-sized model for lighter pilots. Its 11 m (36.1 ft) span wing has a wing area of 25.5 m2 (274 sq ft), 36 cells and the aspect ratio is 4.8:1. The pilot weight range is 60 to 85 kg (132 to 187 lb). The glider model is Deutscher Hängegleiterverband e.V. (DHV) 2 certified.[1]
Art XS 24
Small-sized model for lighter pilots. Its 11.5 m (37.7 ft) span wing has a wing area of 27.9 m2 (300 sq ft), 36 cells and the aspect ratio is 4.8:1. The pilot weight range is 80 to 105 kg (176 to 231 lb). The glider model is DHV 1-2 certified.[1]
Art M 26
Mid-sized model for medium-weight pilots. Its 11.9 m (39.0 ft) span wing has a wing area of 29.8 m2 (321 sq ft), 36 cells and the aspect ratio is 4.8:1. The pilot weight range is 90 to 135 kg (198 to 298 lb). The glider model is DHV 1-2 certified.[1]
Art L 28
Large-sized model for heavier pilots. Its 12.6 m (41.3 ft) span wing has a wing area of 32.7 m2 (352 sq ft), 38 cells and the aspect ratio is 4.9:1. The pilot weight range is 100 to 140 kg (220 to 309 lb). The glider model is DHV 1-2 certified.[1]

Specifications (Art M 26)

edit

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Wingspan: 11.9 m (39 ft 1 in)
  • Wing area: 29.8 m2 (321 sq ft)
  • Aspect ratio: 4.8:1

Performance

  • Maximum speed: 48 km/h (30 mph, 26 kn)
  • Rate of sink: 1.2 m/s (240 ft/min)

References

edit
  1. ^ a b c d e f g Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 38. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X