This article needs additional citations for verification. (December 2011) (Learn how and when to remove this template message)
Worsted (// or //) is a high-quality type of wool yarn, the fabric made from this yarn, and a yarn weight category. The name derives from Worstead, a village in the English county of Norfolk. That village, together with North Walsham and Aylsham, formed a manufacturing centre for yarn and cloth in the 12th century, when pasture enclosure and Liming rendered the East Anglian soil too rich for the older agrarian sheep breeds. In the same period, many weavers from Flanders moved to Norfolk. "Worsted" yarns/fabrics are distinct from woollens (though both are made from sheep's wool): the former is considered stronger, finer, smoother, and harder than the latter.
Worsted was made from the long-staple pasture wool from sheep breeds such as Teeswaters, Old Leicester Longwool and Romney Marsh. Pasture wool was not carded; instead it was washed, gilled and combed (using heated long-tooth metal combs), oiled and finally spun. When woven, worsteds were scoured but not fulled.
Worsted wool fabric is typically used in the making of tailored garments such as suits, as opposed to woollen wool, which is used for knitted items such as sweaters.
Technique and preparationEdit
Many spinners differentiate between worsted preparation and worsted spinning. Worsted preparation refers to the way the fibre is prepared before spinning, using ginning machines which force the fibre staples to lie parallel to each other. Once these fibres have been made into a top, they are then combed to remove the short fibres. The long fibres are combined in subsequent gilling machines to again make the fibres parallel. This produces overlapping untwisted strands called slivers. Worsted spinning refers to using a worsted technique, which produces a smooth yarn in which the fibres lie parallel.
Roving and wool top are often used to spin worsted yarn. Many hand spinners buy their fibre in roving or top form. Top and roving are ropelike in appearance, in that they can be thick and long. While some mills put a slight twist in the rovings they make, it is not enough twist to be a yarn. The fibres in top and rovings all lie parallel to one another along the length, which makes top ideal for spinning worsted yarns.
Worsted-spun yarns, used to create worsted fabric, are spun from fibres that have been combed, to ensure that the fibres all run the same direction, butt-end (for wool, the end that was cut in shearing the sheep) to tip, and remain parallel. A short draw is used in spinning worsted fibres (as opposed to a long draw).
In short draw spinning, spun from combed roving, sliver or wool top, the spinners keep their hands very close to each other. The fibres are held fanned out in one hand while the other hand pulls a small number from the mass. The twist is kept between the second hand and the wheel—there is never any twist between the two hands.
Worsted cloth, archaically also known as stuff, is lightweight and has a coarse texture. The weave is usually twill or plain. Twilled fabrics such as whipcord, gabardine and serge are often made from worsted yarn. Worsted fabric made from wool has a natural recovery, meaning that it is resilient and quickly returns to its natural shape, but non-glossy worsted will shine with use or abrasion.
Worsteds differ from woollens, in that the natural crimp of the wool fibre is removed in the process of spinning the yarn. In 'tropical' worsteds this use of tightly spun, straightened wool combined with a looser weave permits the free flow of air through the fabric.
According to the Craft Yarn Council, the term "Worsted Weight", also known as "Afghan", "Aran", or simply "Medium", refers to a particular weight of yarn that produces a gauge of 16–20 stitches per 4 inches of stockinette, and is best knitted with 4.5mm to 5.5mm needles (US size 7–9).
Before the introduction of automatic machinery, there was little difficulty in attaining a straight fibre, as long wool was always used, and the sliver was made up by hand, using combs. The introduction of Richard Arkwright's water frame in 1771, and the later introduction of cap and mule spinning machines, required perfectly prepared slivers. Many manufactories used one or more preparatory combing machines (called gill-boxes) before worsting, to ensure straight fibres and to distribute the lubricant evenly.
- "Worstead Heritage Trail | Worstead Parish Council". Worsteadpc.norfolkparishes.gov.uk. 2012-07-26. Retrieved 2013-09-15.
-  Archived September 27, 2011, at the Wayback Machine
- Jenkins, Geraint (1972). "2:". The wool textile industry in Great Britain. Routledge Keegan Paul. pp. 26–33. ISBN 0710069790.
- Gilligan, Grant E. (2004). Woollen And Worsted Woven Fabric Design. Woodhead Publishing. p. 3.
- "Standard Yarn Weight System". Craftyarncouncil.com. Retrieved 2013-09-15.
- This article incorporates text from a publication now in the public domain: Barker, Aldred Farrer (1911). "Wool, Worsted and Woollen Manufactures". In Chisholm, Hugh (ed.). Encyclopædia Britannica. XXVIII (11th ed.). Cambridge University Press. pp. 805–816.
- Barber, E. J. W. (1991). Prehistoric Textiles. Princeton University Press. ISBN 0-691-00224-X.
- Burnham, Dorothy K. (1980). Warp and Weft: A Textile Terminology. Royal Ontario Museum. ISBN 0-88854-256-9.