Open main menu
A blow-up of a small section of a 1024x768 (VESA XGA) resolution image; the individual pixels are more visible in its scaled form than its normal resolution.

A video scaler is a system which converts video signals from one display resolution to another; typically, scalers are used to convert a signal from a lower resolution (such as 480p standard definition) to a higher resolution (such as 1080i high definition), a process known as "upconversion" or "upscaling" (by contrast, converting from high to low resolution is known as "downconversion" or "downscaling").

Video scalers are typically found inside consumer electronics devices such as televisions, video game consoles, and DVD or Blu-ray disc players, but can also be found in other AV equipment (such as video editing and television broadcasting equipment). Video scalers can also be a completely separate devices, often providing simple video switching capabilities. These units are commonly found as part of home theatre or projected presentation systems. They are often combined with other video processing devices or algorithms to create a video processor that improves the apparent definition of video signals.

Video scalers are primarily a digital device; however, they can be combined with an analog-to-digital converter (ADC, or digitizer) and a digital-to-analog converter (DAC) to support analog inputs and outputs.

ProcessEdit

 
This is a comparison of several common video resolutions. The more pixels in an image the greater the possibility for finer detail and fidelity.

The "native resolution" of a display is how many physical pixels make up each row and column of the visible area on the display's output surface.[1] There are many different video signals in use which are not the same resolution (neither are all of the displays), thus some form of resolution adaptation is required to properly frame a video signal to a display device. For example, within the United States, there are NTSC, ATSC, and VESA video standards each with several different resolution video formats. Multiple common resolutions are also used for high-definition television; 720p, 1080i, and 1080p.

While scaling a video signal does allow it to match the size of a particular display, the process can result in an increased number of visual artifacts in the signal, such as ringing and posterization.

Scaling by television channelsEdit

Television channels which air a mixture of 16:9 (or high definition) programming and 4:3 (or standard definition) programming may employ scaling and/or cropping in order to make the programming fill the entire screen, as opposed to pillarboxing the feed instead, in order to maintain consistency in format.[2][3] Likewise, broadcasters downscale programming produced in 16:9 for broadcast on their 4:3 feeds through letterboxing—either as a full 16:9 letterbox, or a partial 14:9 letterbox—a technique used primarily by European broadcasters during the transition to digital terrestrial television.[4][5] The Active Format Description standard is a system of variables defining various scaling, letterboxing, and pillarboxing states; broadcasting equipment and televisions can be configured to automatically switch to the appropriate state based on the AFD flag encoded in the content and the aspect ratio of the display.[6]

When the U.S. cable network TNT introduced an HD feed in 2004, it controversially employed a stretching system known as FlexView (which was also offered to other broadcasters). FlexView used a nonlinear method to stretch more near the edges of the screen than in the center of it. The practice was imposed by the senior vice president of broadcast engineering at TNT, Clyde D. Smith, who argued that pillarboxing led to inconsistency between programs for viewers, could cause burn-in on plasma televisions, some older HDTVs could not stretch 4:3 content automatically, and the quality of stretching on some displays was poor.[2] Despite TNT's intentions, the system was frequently criticized by viewers of high definition channels, with some nicknaming the effect "Stretch-O-Vision".[2][7]

In 2014, FXX faced similar criticism for its use of cropping and scaling on reruns of The Simpsons (which only started producing episodes in HD beginning in its 20th season), as its cropping method caused various visual gags to be lost. In February 2015, FXX announced that in response to these complaints, it would present these episodes in their original 4:3 aspect ratio on its video-on-demand service.[3][8]

Since about 2008, some networks and cable companies have run high definition versions of old programing that was originally shot on film shown in the 4:3 format. This format always cropped the sides of the image. For example, syndicated broadcast stations and the cable network TBS air Seinfeld in HD. The owner, Sony Pictures went to the 35mm film source, making new HD masters and cropping the top and bottom parts of the frame, while restoring the sides.[9]

See alsoEdit

ReferencesEdit

  1. ^ "Video Upscaling for better viewing experience". hometoys.com. 2011-05-25. Retrieved 2013-03-07.
  2. ^ a b c "TNT Stretches for HD". TV Week. Retrieved 2008-08-10.
  3. ^ a b "FXX will finally stream The Simpsons in original 4:3 format". The Verge. Retrieved 13 February 2015.
  4. ^ Bob Wolfley (September 2, 2010). "Fox Sports taking a wider view of football". Milwaukee Journal Sentinel. Journal Communications. Archived from the original on September 5, 2010.
  5. ^ "Beyond HD". BBC Academy. Retrieved 3 June 2015.
  6. ^ "Managing AFD: Keep image format under your control". TV Technology. Retrieved 5 June 2016.
  7. ^ "Just say no to stretch-o-vision". EngadgetHD. Retrieved 2008-08-10.
  8. ^ "FXX ruins the punchline by inexplicably cropping old standard definition 'Simpsons' episodes". The Verge. Retrieved 13 February 2015.
  9. ^ "Seinfeld goes HD on TBS HD". AOL. September 3, 2008. Archived from the original on January 16, 2013. Retrieved July 24, 2019.