I am an amateur astronomer on a mission to do astrophotography on a budget.
I own small Newtonian telescope Celestron Firstscope 114EQ on german equatorial EQ1 mount with AZ-GTi atached. My mission is to convert that telescope to a decent astrofotography tool. I know, many of you will roll your eyes and shake your heads, but main objective here is to learn on the way, explore possibilities and see where limits are.
I design my own 3D printed parts with 3D modeling software. Actually I don't own 3D printer (yet) so I print all my desings at cloud providers.
If you have any questions, suggestions, or you yust wanted to say hello, don't hesistate to contact me.