User:OluOrija/sandbox/Clay Modeling Methods

Clay Modeling Techniques

1. Pinch Pots

pinch pot construction technique Clay Hand Building projects examples Begin a pinch pot by forming a lump of clay into a smooth sphere that fits the size of the hand. This method is similar to the way the Native Americans shaped clay into useful pots. While holding the sphere of clay, press the thumb into the center of the ball, half-way to the bottom. While revolving the ball in one hand, press the walls out evenly with the thumb into the inside and the fingers on the outside. Smooth the surface with a damp sponge. See detailed step-by-step pinchpot project

2. Coil Method

coil pot construction technique Clay Hand Building projects examples Coils of clay can be used to build bowls, vases and other forms in various shapes and sizes. Keeping the fingers flat, form the clay into sausage shapes, then roll into ropes 1/4 to 1/2 inches thick. Make a shallow dish with the pinch pot method and turn up-side down to serve as a foot of base. Place a coil along the edge of the foot. Dampen the fingers and join the next coil to it, with a little pressure. Keep adding coils . Coils may be pressed with the fingers or a tool on both the inside and outside to create interesting texture. See detailed step by step coiled pot project

3. Slab Method

Slab construction technique Clay Hand Building projects examples Place two strips of wood on canvas a little further apart than the width of the finished slabs. Working on a textured fabric will leave imprints on the clay slab. Place clay on the cloth between the strips of wood and roll out. Use a pointed tool to trim the slab of clay to desired size. You may make paper patterns to follow if a form that has a number of sides is desired. Rub a wet finger over the edges to be joined and score with a tool. Roll out a thin coil of sticky clay and place it along one edge. Press the two edges together. Slabs of clay may be placed over rocks, bowls, plastic forms etc. to create interesting shapes. As the clay dries, it shrinks away from the form but retains the shape of the form. See detailed step-by-step slab project sample

References

edit
edit

[1]