![]() | This is the sandbox page where you will draft your initial Wikipedia contribution.
If you're starting a new article, you can develop it here until it's ready to go live. If you're working on improvements to an existing article, copy only one section at a time of the article to this sandbox to work on, and be sure to use an edit summary linking to the article you copied from. Do not copy over the entire article. You can find additional instructions here. Remember to save your work regularly using the "Publish page" button. (It just means 'save'; it will still be in the sandbox.) You can add bold formatting to your additions to differentiate them from existing content. |
Introduction
editAn acid–base titration is a method of quantitative analysis for determining the concentration of a Brønsted-Lowry acid or base (analyte/titrate) by neutralizing it using a solution of known concentration (titrant). A pH indicator is used to monitor the progress of the acid–base reaction and a titration curve can be constructed.
This differs from other modern modes of titrations, such as oxidation-reduction titrations, precipitation titrations, & complexometric titrations.[1] Although these types of titrations are also used to determine unknown amounts of substances, these substances vary from ions to metals.
Acid-base titration finds extensive applications in various scientific fields, such as pharmaceuticals, environmental monitoring, and quality control in industries.[2] This method's precision and simplicity makes it an important tool in quantitative chemical analysis, contributing significantly to the general understanding of solution chemistry.[3]
History
editThe history of acid-base titration dates back to the late 19th century when advancements in analytical chemistry fostered the development of systematic techniques for quantitative analysis.[4] The origins of titration methods can be linked to the work of chemists such as Karl Friedrich Mohr in the mid-1800s.[4] His contributions laid the groundwork for understanding titrations involving acids and bases.
Theoretical progress came with the research of Swedish chemist Svante Arrhenius, who, in the late 19th century, introduced the concept of ions, providing a theoretical framework for acid-base reactions.[5] This theoretical foundation, along with ongoing experimental refinements, contributed to the evolution of acid-base titration as a precise and widely applicable analytical method.[5]
Over time, the method has undergone further refinements and adaptations, establishing itself as an essential tool in laboratories across various scientific disciplines.
Acidimetry and alkalimetry
editAcidimetry and alkalimetry are types of volumetric analyses in which the fundamental reaction is a neutralization reaction. They involve the controlled addition of either an acid or a base (titrant) of known concentration to the solution of the unknown concentration (titrate) until the reaction reaches its stoichiometric equivalence point. At this point, the moles of acid and base are equal, resulting in a neutral solution:
acid + base → salt + water
For example:
HCl + NaOH → NaCl + H2O
Acidimetry is the specialized analytical use of acid-base titration to determine the concentration of a basic (alkaline) substance using standard acid. This can be used for weak bases and strong bases.[6] An example of an acidimetric titration involving a strong base is as follows:
Ba(OH)2 + 2 H+ → Ba2+ + 2 H2O
In this case, the strong base (Ba(OH)2) is neutralized by the acid until all of the base has reacted. This allows the viewer to calculate the concentration of the base from the volume of the standard acid that is used.
Alkalimetry follows uses same concept of specialized analytic acid-base titration, but to determine the concentration of an acidic substance using standard base.[6] An example of an alkalimetric titration involving a strong acid is as follows:
H2SO4 + 2 OH− → SO42- + 2 H2O
In this case, the strong acid (H2SO4) is neutralized by the base until all of the acid has reacted. This allows the viewer to calculate the concentration of the acid from the volume of the standard base that is used.
The standard solution (titrant) is stored in the burette, while the solution of unknown concentration (analyte/titrate) is placed in the Erlenmeyer flask below it with an indicator.
Indicator choice
editA suitable pH indicator must be chosen in order to detect the endpoint of the titration. The colour change or other effect should occur close to the equivalence point of the reaction so that the experimenter can accurately determine when that point is reached. The pH of the equivalence point can be estimated using the following rules:
- A strong acid will react with a strong base to form a neutral (pH = 7) solution.
- A strong acid will react with a weak base to form an acidic (pH < 7) solution.
- A weak acid will react with a strong base to form a basic (pH > 7) solution.
These indicators are essential tools in chemistry and biology, aiding in the determination of a solution's acidity or alkalinity through the observation of colour transitions. The table below serves as a reference guide for these indicator choices, offering insights into the pH ranges and colour transformations associated with specific indicators:
Indicator Name | Indicator Colour | Transition Interval (pH range) | Color after High pH Conditions |
---|---|---|---|
Methyl Orange | Orange/Red | 3.1 - 4.4 | Yellow |
Methyl Red | Red | 4.4 - 6.3 | Yellow |
Congo Red | Blue | 3.0 - 5.2 | Red |
Phenolphthalein | Colourless | 8.3 - 10.0 | Pink |
Thymolphthalein | Colourless | 9.3 - 10.5 | Blue |
Bromophenol Blue | Yellow | 3.0 - 4.6 | Blue |
Bromocresol Green | Yellow | 3.8 - 5.6 | Blue |
Thymol Blue | Red | 1.2 - 2.8; 8.0 - 9.6 | Blue |
Cresol Red | Yellow | 7.2 - 8.8 | Violet |
Neutral Red | Red | 6.8 - 8.0 | Yellow |
Phenolphthalein is widely recognized as one of the most commonly used acid-base indicators in chemistry.[8] Its popularity is because of its effectiveness in a broad pH range and its distinct colour transitions.[8] Its sharp and easily detectable colour changes makes phenolphthalein a valuable tool for determining the endpoint of acid-base titrations, as a precise pH change signifies the completion of the reaction.
When a weak acid reacts with a weak base, the equivalence point solution will be basic if the base is stronger and acidic if the acid is stronger. If both are of equal strength, then the equivalence pH will be neutral.[9] However, weak acids are not often titrated against weak bases because the colour change shown with the indicator is often quick, and therefore very difficult for the observer to see the change of colour.
The point at which the indicator changes colour is called the endpoint. A suitable indicator should be chosen, preferably one that will experience a change in colour (an endpoint) close to the equivalence point of the reaction.
In addition to the wide variety of indicators as shown in the above table, pH papers, crafted from paper or plastic infused with combinations of these indicators, serve as a practical alternative.[9] You can estimate the pH of a solution by immersing a strip of pH paper into it and matching the observed colour to the reference standards provided on the container.[9]
Overshot titration
editOvershot titrations are a common phenomenon, and refer to a situation where the volume of titrant added during a chemical titration exceeds the amount required to reach the equivalence point.[10] This excess titrant leads to an outcome where the solution becomes slightly more alkaline or over-acidified.[10]
Overshooting the equivalence point can occur due to various factors, such as errors in burette readings, imperfect reaction stoichiometry, or issues with endpoint detection.[10] The consequences of overshot titrations can affect the accuracy of the analytical results, particularly in quantitative analysis.[10]
Researchers and analysts often employ corrective measures, such as back-titration[11] or using more precise titration techniques, to mitigate the impact of overshooting and obtain reliable and precise measurements. Understanding the causes, consequences, and solutions related to overshot titrations is crucial in achieving accurate and reproducible results in the field of chemistry.
Mathematical analysis: titration of weak acid
editFor calculating concentrations, ICE tables are required.[12] ICE stands for initial, changes, and equilibrium.
The pH of a weak acid solution being titrated with a strong base solution can be found at different points along the way. These points fall into one of four categories:[13]
- initial pH
- pH before the equivalence point
- pH at the equivalence point
- pH after the equivalence point
1. The initial pH is approximated for a weak acid solution in water using the equation:
where is the initial concentration of the hydronium ion. 2. The pH before the equivalence point depends on the amount of weak acid remaining and the amount of conjugate base formed. The pH can be calculated approximately by the Henderson–Hasselbalch equation: where Ka is the acid dissociation constant.
2. The pH before the equivalence point depends on the amount of weak acid remaining and the amount of conjugate base formed. The pH can be calculated approximately by the Henderson–Hasselbalch equation: where Ka is the acid dissociation constant.
3. The pH at the equivalence point depends on how much the weak acid is consumed to be converted into its conjugate base. Note that when an acid neutralizes a base, the pH may or may not be neutral (pH = 7). The pH depends on the strengths of the acid and base. In the case of a weak acid and strong base titration, the pH is greater than 7 at the equivalence point. Thus pH can be calculated using the following formula:
Where is the concentration of the hydroxide ion. The concentration of the hydroxide ion is calculated from the concentration of the hydronium ion and using the following relationship:
Where Kb is the base dissociation constant, Kw is the water dissociation constant.
4. The pH after the equivalence point depends on the concentration of the conjugate base of the weak acid and the strong base of the titrant. However, the base of the titrant is stronger than the conjugate base of the acid. Therefore, the pH in this region is controlled by the strong base. As such the pH can be found using the following:
where is the concentration of the strong base that is added, is the volume of base added until the equilibrium, is the concentration of the strong acid that is added, and is the initial volume of the acid.
Single formula
editMore accurately, a single formula[14] that describes the titration of a weak acid with a strong base from start to finish is given below:
where " φ = fraction of completion of the titration (φ < 1 is before the equivalence point, φ = 1 is the equivalence point, and φ > 1 is after the equivalence point)
- = the concentrations of the acid and base respectively
- = the volumes of the acid and base respectively
Graphical methods
editIdentifying the pH associated with any stage in the titration process is relatively simple for monoprotic acids and bases. A monoprotic acid is an acid that donates one proton. A monoprotic base is a base that accepts one proton. A monoprotic acid or base only has one equivalence point on a titration curve.[9]
A diprotic acid donates two protons and a diprotic base accepts two protons. The titration curve for a diprotic solution has two equivalence points.[9]
A polyprotic substance has multiple equivalence points.
All titration reactions contain small buffer regions that appear horizontal on the graph. These regions contain comparable concentrations of acid and base, preventing sudden changes in pH when additional acid or base is added.[15]
Pharmaceutical applications
editIn the pharmaceutical industry, acid-base titration serves as a fundamental analytical technique with diverse applications. One primary use involves the determination of the concentration of Active Pharmaceutical Ingredients (APIs) in drug formulations, ensuring product quality and compliance with regulatory standards.[16]
Acid-base titration is particularly valuable in quantifying acidic or basic functional groups with pharmaceutical compounds. Additionally, the method is employed for the analysis of excipients, enabling the precise control of formulation parameters.[17] Quality control laboratories utilize acid-base titration to assess the purity of raw materials and to monitor various stages of drug manufacturing processes.[17]
The technique's reliability and simplicity make it an integral tool in pharmaceutical research and development, contributing to the production of safe and effective medications.
Environmental monitoring applications
editAcid-base titration plays a crucial role in environmental monitoring by providing a quantitative analytical method for assessing the acidity or alkalinity of water samples.[18] The measurement of parameters such as pH, total alkalinity, and acidity is essential in evaluating the environmental impact of industrial discharges, agricultural runoff, and other sources of water contamination.[18]
Acid-base titration allows for the determination of the buffering capacity of natural water systems, aiding in the assessment of their ability to resist changes in pH.[19] Monitoring pH levels is important for preserving aquatic ecosystems and ensuring compliance with environmental regulations.[19]
Acid-base titration is also utilized in the analysis of acid rain effects on soil and water bodies, contributing to the overall understanding and management of environmental quality.[20] The method's prevision and reliability make it a valuable tool in safeguarding ecosystems and assessing the impact of human activities on natural water resources.[20]
See also
editReferences
edit- ^ "Titration | Definition, Types, & Facts | Britannica". www.britannica.com. Retrieved 2023-12-06.
- ^ Rajendraprasad, Nagaraju; Basavaiah, Kanakapura; Vinay, Basavaiah Kanakapura (2010). "Acid-base titrimetric assay of hydroxyzine dihydrochloride in pharmaceutical samples". Chemical Industry and Chemical Engineering Quarterly. 16 (2): 127–132.
- ^ Li, Na; Hefferren, John J.; Li, Ke'an (2013-04-26). Quantitative Chemical Analysis. World Scientific Publishing Company. ISBN 978-981-4452-31-1.
- ^ a b Szabadváry, Ferenc; Chalmers®, Robert A. (1979-08-01). "Carl Friedrich Mohr and analytical chemistry in Germany". Talanta. 26 (8): 609–617. doi:10.1016/0039-9140(79)80165-4. ISSN 0039-9140.
- ^ a b Kousathana, Margarita; Demerouti, Margarita; Tsaparlis, Georgios (2005-02-01). "Instructional Misconceptions in Acid-Base Equilibria: An Analysis from a History and Philosophy of Science Perspective". Science & Education. 14 (2): 173–193. doi:10.1007/s11191-005-5719-9. ISSN 1573-1901.
- ^ a b The Chemical Age – Chemical Dictionary – Chemical Terms. Hesperides. 2007-03-15. p. 14. ISBN 978-1-4067-5758-3.
- ^ Kahlert, Heike; Meyer, Gabriele; Albrecht, Anja (2016-04-29). "Colour maps of acid–base titrations with colour indicators: how to choose the appropriate indicator and how to estimate the systematic titration errors". ChemTexts. 2 (2): 7. doi:10.1007/s40828-016-0026-4. ISSN 2199-3793.
- ^ a b "Phenolphthalein | pH indicator, acid-base titration, indicator dye | Britannica". www.britannica.com. 2023-09-15. Retrieved 2023-11-05.
- ^ a b c d e "13.5: Acid/Base Titration". Chemistry LibreTexts. 2016-02-13. Retrieved 2023-10-08. Cite error: The named reference ":0" was defined multiple times with different content (see the help page).
- ^ a b c d Kim, Myung-Hoon (October 2009). "How to Save Overshot Titrations".
{{cite web}}
: Check|archive-url=
value (help)CS1 maint: url-status (link) - ^ "What is Back Titration?". ThoughtCo. Retrieved 2023-11-05.
- ^ Gabi (2021-08-05). "Using an ICE Table". ChemTalk. Retrieved 2023-12-06.
- ^ Quantitative Chemical Analysis, 7Ed. by Daniel C. Harris. Freeman and Company 2007.
- ^ De Levie, Robert (1993). "Explicit expressions of the general form of the titration curve in terms of concentration: Writing a single closed-form expression for the titration curve for a variety of titrations without using approximations or segmentation". Journal of Chemical Education. 70 (3): 209. Bibcode:1993JChEd..70..209D. doi:10.1021/ed070p209.
- ^ "Titration pH Curves – HSC Chemistry". Science Ready. Retrieved 2023-12-06.
- ^ Alhamdany, Hayder; Alfahad, Mohanad (Jul–Sep 2021). "Stability evaluation of Acetylsalicylic acid in commercial Aspirin tablets available in the Iraqi market" (PDF).
{{cite web}}
: CS1 maint: date format (link) CS1 maint: url-status (link) - ^ a b Chapman, O. W. (1949). "Statistical Quality Control in College Analytical Laboratories". Transactions of the Kansas Academy of Science (1903-). 52 (2): 160–167. doi:10.2307/3626169. ISSN 0022-8443.
- ^ a b Marle, Leanne; Greenway, Gillian M. (2005-10-01). "Microfluidic devices for environmental monitoring". TrAC Trends in Analytical Chemistry. 24 (9): 795–802. doi:10.1016/j.trac.2005.08.003. ISSN 0165-9936.
- ^ a b journals.biologists.com https://journals.biologists.com/jeb/article/189/1/13/6778/Urea-production-acid-base-regulation-and-their. Retrieved 2023-12-06.
{{cite web}}
: Missing or empty|title=
(help) - ^ a b Karmanovskaya, Natalia V; Nosova, Olga V; Galishevskaya, Victoria V (February 2, 2021). "Public Environmental Monitoring of the Quality of Water Bodies in Norilsk and Taimyr" (PDF).
{{cite web}}
: CS1 maint: url-status (link)