In geology, a placer deposit or placer is an accumulation of valuable minerals formed by gravity separation from a specific source rock during sedimentary processes.[1] The name is from the Spanish word placer, meaning "alluvial sand". Placer mining is an important source of gold, and was the main technique used in the early years of many gold rushes, including the California Gold Rush. Types of placer deposits include alluvium, eluvium, beach placers, aeolian placers and paleo-placers.[2]
Placer materials must be both dense and resistant to weathering processes. To accumulate in placers, mineral particles must have a specific gravity above 2.58.[1]
Placer environments typically contain black sand, a conspicuous shiny black mixture of iron oxides, mostly magnetite with variable amounts of ilmenite and hematite.[3] Valuable mineral components often occurring with black sands are monazite, rutile, zircon, chromite, wolframite, and cassiterite.[3] Early mining operations were likely a result of placer deposits as they were easily accessible and potential size.[4] The events known as gold/diamonds rushes were caused by placer deposits and have proved to be plentiful.[4]
Characteristics of placer minerals edit
Density edit
Placer minerals are defined as having a specific gravity above 2.58.[5] The separation of the valuable minerals from the most common non-economic mineral, quartz, depends on the difference in specific gravity/density.The weathering process allows for the accumulation of placer minerals, while less dense material such as quartz are swept away.
Hardness edit
Hardness allows a placer minerals to resist mechanical breakdown and loss of mass from abrasion during transport.[5] A hardness greater than quartz is desired, however substances such as gold typically deform and create irregularly shaped nuggets when subject to mechanical stress.[5]
Stability edit
Chemical stability is important for a placer mineral to resist chemical breakdown such as oxidation, Minerals lacking chemical stability will form less desirable alteration when subject to chemical breakdown.[5]
Types of placers edit
Alluvial placers edit
Alluvial placers are those formed in river or stream sediments. Another name for alluvial placers are stream placers.[6] Typical locations for alluvial gold placer deposits are on the inside bends of rivers and creeks; in natural hollows; at the break of slope on a stream; the base of an escarpment, waterfall or other barrier. Stream placers are the most economical and common types of placers and have provided many with riches in the past.
Alluvial placers are formed by the deposition of dense particles at a site where water velocity remains below that required to transport them further.
To form a placer deposit, the particles desired must show a marked density contrast with the gangue material, which is able to be transported away from the trap site.[7] Only if the deposit is winnowed in this way can the minerals be concentrated to economic levels.
Beach placers edit
Beach placers are formed in sand and gravel deposited along the edge of large bodies of water and are typically found where streams or rivers flow into a large body of water.[8] Materials collect as beach placers by continuous wave action and currents.[8] Some important examples of beach placers include black sands of Oregon, gold deposits in Nome, Alaska, zircon sands in Brazil and Australia as well as diamond marine gravel in South Africa.[9]
Gold bearing beach placers consist of large strips of black sands and are typically constantly changing as a result of storms or sporadic wave action.[10] Typically beach placers are populated by ilmenite and magnetite, however gold, platinum and chromite are found in varying amounts.[10] Some of the most productive beach placers are considered ancient beaches that are now far inland from the water, these placers no longer shift with storms and tidal action but with wind and rainfall.[11]
Eluvial placers edit
Eluvial placers are deposits of metal formed on hillsides and slopes weathered by rainfall and wind.[11] Lighter materials are carried away and weathered leaving concentrations of valuable metals.[10]
Eluvial placers are typically not large enough to support large scale mining, however in one case in Nevada there has been large scale gold mining operations based on placer deposits at Round Mountain.[10]
Aeolian placers edit
Aeolian placers are valuable minerals found in arid regions freed from their source rock by wind actions.[12] Wind erosion leaves a cement like substance in which material like gold are found. Wind action blows sand and dirt away leaving the deposits close to the surface.[13] Historically, aeolian placers have been mined by hand with simple tools by miners due to the proximity to the surface, and small concentration.[10]
Aeolian placers are common in Australia, Western United states, where the climate is arid and the ground is relatively level leaving wind as the primary erosion force.
Paleo-placers edit
Paleo-placer deposits are deposits of minerals from all of the above placer types that occurred millions of years ago.[14] These deposits are typically very far underground in ancient riverbeds, beaches, or slopes.[14] The Witwatersrand Basin, South Africa is the largest gold deposit in the world and is considered a paleo-placer, it has produced over 1.5 billion ounces of gold.[14] The Witwatersrand Basin is considered and ancient alluvial placer.[14]
- ^ a b Els, Gerhard; Eriksson, Pat (2006). "Placer formation and placer minerals". Ore Geology Reviews. 28 (4): 373–375. doi:10.1016/j.oregeorev.2005.02.001 – via Elsevier Science Direct.
{{cite journal}}: CS1 maint: date and year (link) - ^ "Placer deposit | geology". Encyclopedia Britannica. Retrieved 2021-02-11.
- ^ a b Filippidis, Anestis; Clouvas, Alexander (1997). "Mineral, chemical and radiological investigation of a black sand at Touzla Cape, near Thessaloniki, Greece". Environmental Geochemistry and Health. 19. et al,: 83–88. doi:10.1023/A:1018498404922 – via SpringerLink.
{{cite journal}}: CS1 maint: extra punctuation (link) - ^ a b "Placer deposit | geology". Encyclopedia Britannica. Retrieved 2021-04-06.
- ^ a b c d Els, Gerhard; Eriksson, Pat (2006). "Placer formation and placer minerals". Ore Geology Reviews. 28 (4): 373–375. doi:10.1016/j.oregeorev.2005.02.001 – via Elsevier Science Direct.
{{cite journal}}: CS1 maint: date and year (link) - ^ "Placer deposit | geology". Encyclopedia Britannica. Retrieved 2021-02-11.
- ^ Els, Gerhard; Eriksson, Pat (2006). "Placer formation and placer minerals". Ore Geology Reviews. 28 (4): 373–375. doi:10.1016/j.oregeorev.2005.02.001 – via Elsevier Science Direct.
{{cite journal}}: CS1 maint: date and year (link) - ^ a b "Placer deposit | geology". Encyclopedia Britannica. Retrieved 2021-02-11.
- ^ "Beach Placers | List of High Impact Articles | PPts | Journals | Videos". www.longdom.org. Retrieved 2021-03-25.
- ^ a b c d e "Types of Placers". Western Mining History. Retrieved 2021-03-25.
- ^ a b "Placer deposit | geology". Encyclopedia Britannica. Retrieved 2021-03-25.
- ^ "What is Eolian Placer Gold? - Gold Prospecting Mining Equipment Detectors Snake Protection". www.goldrushtradingpost.com. Retrieved 2021-03-25.
- ^ Michaud, David (2016-10-23). "Types of Placers". Mineral Processing & Metallurgy. Retrieved 2021-03-26.
- ^ a b c d "Where Does Placer Gold Come From? – Part 3 Placer | West Coast Placer". Retrieved 2021-04-06.