Toyota R engine
The Toyota R family was a series of straight-four gasoline automobile engines. Designed for longitudinal placement in such vehicles as the Celica and Hilux and in production from 1953 through 1997, usage faded out as many of Toyota's mainstream models moved to front-wheel drive. Overhead cam (OHC) versions featured a chain-driven camshaft.
|Toyota R engine|
Modified 18R-G engine in a 1974 Toyota Corona Hardtop
|Block material||Cast iron|
|Head material||Cast iron, Aluminum|
|Power output||45–412 kW (61–560 PS; 60–553 hp)|
|Torque output||108–234 N⋅m (80–173 lb⋅ft)|
History of the R familyEdit
The 1.5 L (1,453 cc) R family was produced from 1953 through 1964, and was originally manufactured at the Toyota Honsha plant.
Bore and stroke was 77 mm × 78 mm (3.03 in × 3.07 in). In common with new engines of the time, it was made from cast iron (both the block and the head), water cooled, used a three bearing crank, 12V electrics and a side mounted gear-driven camshaft controlling overhead valves via pushrods in a non-cross flow head (exhaust and inlet manifolds being on the same side of the engine). Induction was by a twin throat down-draft carburettor, the compression ratio was 8.0:1 and the total weight was 155 kg (342 lb). An LPG version, the R-LPG, was produced for the last two years.
The R engine was the Toyota engine used in the 1958 Toyota Crown, the first model to be exported to the United States. Road & Track was unimpressed with the engine on its introduction, noting that it idled quietly but was "not capable of very high revolutions per minute."
|R||45 kW (61 PS; 60 hp) at 4,400 rpm||108 N⋅m (80 lb⋅ft) at 2,600 rpm||1953–1964|
The 1.5 L (1,490 cc) 2R family was produced from 1964 through 1971. It is a square engine, with bore and stroke of 78 mm (3.07 in).
|2R||55 kW (75 PS; 74 hp) at 5,000 rpm||116 N⋅m (86 lb⋅ft) at 2,600 rpm||1964–1969|
- 1964-Jan 1970 Toyota Corona RT40/RT46V/RT50/RT56
- Feb 1970-Jan 1971 Toyota Corona RT80/90/86V
- 1968-1971 Toyota Mark II
- Toyota Bus RH15B
- 1965-1967 Toyota Stout RK43/RK47
- Toyota Toyoace PK41
- Toyota Hilux RN10
The 1.9 L (1,897 cc) 3R family was produced from 1959 through 1968.
When introduced it had a 7.7:1 compression ratio. In 1960 the 3R was uprated to 8:1 and the 3R-B version was offered from 1960 through 1968 with the old 7.7:1 compression ratio. The 3R-C was introduced to comply with Californian emissions laws. The 3R-LPG variant was made for the last five years.
|3R||59 kW (80 PS; 79 hp) at 4,600 rpm||142 N⋅m (105 lb⋅ft) at 2,600 rpm||1959–1960||7.7 CR|
|3R||66 kW (90 PS; 89 hp) at 5,000 rpm||142 N⋅m (105 lb⋅ft) at 3,400 rpm||1960–1968||8.0 CR|
|3R-B||59 kW (80 PS; 79 hp) at 4,600 rpm||142 N⋅m (105 lb⋅ft) at 2,600 rpm||1960–1968||7.7 CR|
|3R-C||emissions control - California|
- 1963–1968 Toyota Dyna
- 1964–1967 Toyota Stout, originally 85 PS (63 kW; 84 hp)
- 1969–? Toyota Hilux
- 1967–1969 Toyota Corona (US)
- 1959–1967 Toyota Crown
- 1959–? Toyota Masterline
The 1.6 L (1,587 cc) 4R family was produced from 1965 through 1968.
Bore and stroke was 80.5 mm × 78 mm (3.17 in × 3.07 in).
- 1967 Toyota Corona (Japan)
The 2.0 L (1,994 cc) 5R family was produced from 1968 through 1986.
An LPG version, the 5R-LPG, was produced from 1968 through 1983.
- Toyota Crown: third through sixth generation (RS50, RS60/66, RS80/RS100, and RS110). Only with LPG for taxi use in the last two generations.
- Toyota Dyna RU10
- Toyota Stout RK101
- Toyota Toyoace RY20
- Aug 1981-? Toyota Corona sixth generation (RT131), only LPG with automatic transmission.
The 1.7 L (1,707 cc) 6R was produced from 1969 through 1974. Output is 107 hp (80 kW; 108 PS) at 5,300 rpm. The 6R-B was produced those same years, while the natural gas powered 6R-LPG was produced from 1970 through 1973.
The 1.6 L (1,591 cc) 7R was produced from 1968 through 1971 with a twin throat down-draft carburettor.
The 7R-B was produced from 1968 through 1969 with dual SU carburetors and higher compression.
The 7R-LPG was produced from 1969 through 1970.
The 7R was similar in displacement and technology to the 4R except the wider 86 mm (3.39 in) bore and shorter 68.5 mm (2.70 in) stroke of the 7R gave different power characteristics.
|7R||63 kW (86 PS; 84 hp) at 5,500 rpm||123 N⋅m (91 lb⋅ft) at 3,800 rpm||8.5||1968–1971|
|7R-B||75 kW (102 PS; 101 hp) at 6,200 rpm||133 N⋅m (98 lb⋅ft) at 4,200 rpm||9.5||1968–1969||Dual SU carburettors|
- 1968-1970 Toyota Corona (RT41 sedan, RT53 hardtop, RT54 hardtop)
- 1970 Toyota Corona (RT82 sedan)
- 1968-1970 Toyota Corona Mark II (RT6x)
- 1968-1971 Toyota Corona Mark II Wagon (RT76D)
The 1.9 L (1,858 cc) 8R The engine was produced from 1968 through 1973.
Cylinder bore and stroke was 85.9 mm × 80 mm (3.38 in × 3.15 in) with a five bearing crank.
It was also available as the 8R-D, dual SU 8R-B, EFI 8R-E, Californian-spec 8R-C and DOHC 8R-G.
The Toyota upped the ante again with the DOHC (but still 2-valve) 8R-G, produced from 1969 through 1972. From 1969 to Feb 1971 it was known as the 10R, but along with a removal of the tensioner gear in the interest of quieter operation, it was renamed the 8R-G to reflect the decision that twin-cam engines were henceforth to be identified by a "-G" suffix. 4,931 twin cam engines were built, all installed in the Toyota Corona Mark II (RT72) 1900 GSS. The 10R/8R-G weighed in at 170 kg (370 lb) and as such was both lighter and more compact than its less powerful predecessor the 9R
|8R||81 kW (109 hp; 110 PS) at 5,500 rpm||153 N⋅m (113 lb⋅ft) at 3,800 rpm||9.0||1968–1972|
|8R-B||82 kW (110 hp; 111 PS) at 6,000 rpm||152 N⋅m (112 lb⋅ft) at 4,000 rpm||10.0||1969–1971||Dual SU carburetors|
|8R-C||81 kW (109 hp; 110 PS) at 5,500 rpm||174 N⋅m (128 lb⋅ft) at 3,600 rpm||9.0||Californian emissions controls|
|8R-G||104 kW (139 hp; 141 PS) at 6,400 rpm||166 N⋅m (122 lb⋅ft) at 5,200 rpm||1969–1972||DOHC, dual side-draft carburettors|
- 1970–1971 Toyota Hilux, 72 kW (97 hp; 98 PS)
- 1971–1973 Toyota Corona 1900 hardtop
- Toyota Corona Mark II RT72 Corona Mark II 1900 hardtop
- Toyota Corona Mark II RT72 Corona Mark II 1900 hardtop GSS (8R-G)
The 1.6 L (1,587 cc) 9R was produced from 1967 through 1968. Bore and stroke 80.5 mm × 78 mm (3.17 in × 3.07 in).
It was essentially a 4R with a DOHC head designed by Yamaha. The cam lobes activated the valves directly via a bucket over shim arrangement. This same arrangement was used on the 2M, 8R-G, 10R, 18R-G, 2T-G, 4A-GE and 3T-GTE engines (all designed by Yamaha).
Output was 82 kW (110 hp; 111 PS) at 6,200 rpm and 136 N⋅m (100 lb⋅ft) at 5,000 rpm. It was a 2-valve DOHC design with two Solex carburettors and weighed 174 kg (384 lb). A total of 2,229 9R engines were built.
- Toyota Corona RT55 Corona 1600 GT hardtop
The twin cam 1.9 L (1,858 cc) 10R was produced from 1967 through Feb 1971, when it was renamed the 8R-G. The later 8R-G version did not receive a timing chain tensioner in an effort to make it more silent.
Output was 104 kW (139 hp; 141 PS) at 6,400 rpm and 166 N⋅m (122 lb⋅ft) at 5,200 rpm.
- Toyota Corona Mark II RT75 Corona Mark II GSS
The 1.6 L (1,587 cc) 12R was produced from 1969 through 1988. It was also built in the Philippines as the 12R-M, by Toyota's local affiliate Delta Motors Corporation.
Technical Specs (Finnish Owner's Manual from 1973 Corona Mark 1)
- Four cylinder, 4-stroke, OHV
- Bore × stroke: 80.5 mm × 78 mm (3.17 in × 3.07 in)
- Compression ratio: 8,5:1
- Maximum power: 90 PS (66 kW; 89 hp) at 5400 rpm SAE
The 12R-LPG, was produced from 1969 through 1983.
Technical Specs: 1975 59 kW (80 PS; 79 hp) redline 4,400 rpm
- 1971-1978 Toyota Corona
- 1971-1972 Toyota Hilux
- 1977 Toyota Hiace
- 1975 Toyota Hiace Commercial Camper
- 1976 Daihatsu Taft (F20)
- Delta Mini Cruiser/Explorer
The OHC 1.8 L (1,808 cc) 16R was produced from 1974 through 1980. Power output as mounted in a 1980 Mark II was 105 PS (77 kW; 104 hp) at 5,600 rpm, while a twin carburetted version produced 110 PS (81 kW; 108 hp) at 6,000 rpm. The 16R-B was produced for the first two years. There was also a 16R-J version for various commercial vehicle applications.
- Oct 1975–Feb 1977 Toyota Carina RA10/16
- Toyota Mark II Van RX37V (16R-J), 95 PS (70 kW; 94 hp)
- Toyota Corona RT130/137
- Toyota HiAce RH12/14/17/41 (16R-J)
The 18R series shared a 2.0 L (1,968 cc) block; cylinder bore and stroke was 88.5 mm × 80 mm (3.48 in × 3.15 in).
The 2 valve, SOHC versions were as follows:
|18R||78 kW (106 PS; 105 hp)
65 kW (88 PS; 87 hp) at 5000 rpm
|142–145 N⋅m (105–107 lb⋅ft)
145 N⋅m (107 lb⋅ft) at 3600 rpm
|18R-C||72 kW (98 PS; 97 hp) at 5500 rpm||143–145 N⋅m (105–107 lb⋅ft) at 3600 rpm||1971–1981||emissions control - worldwide (Californian Standards)|
|18R-U||75 kW (102 PS; 101 hp) at 5500 rpm||152 N⋅m (112 lb⋅ft) at 3600 rpm||1975–1978||emissions control - Japan|
|18R-E||84 kW (114 PS; 113 hp) at 5600 rpm||172 N⋅m (127 lb⋅ft) at 4400 rpm||1974–1975||EFI, Japan only|
The 8-valve DOHC 18R-G and its variations were produced from 1973 to 1982, replacing the 8R-G and providing a performance engine which took advantage of the entire 2-litre limit of Japan's "small car" class. While most 18R-Gs had a head designed and made by Yamaha, a very few had Toyota heads. Yamaha's tuning-fork logo can be seen on the Yamaha heads. Except for the head and related timing components, most parts were shared or interchangeable with the SOHC 18R. Combustion chambers were hemispheric.
In 1975, air injection was added to the Japan-market 18R-GR for improved emissions. This used Solex carburettors. A fuel injected and catalyzed Japan-market version, the 18R-GEU, was produced from 1978 through 1982. There was also a catalyzed carburetted version, the 18R-GU.
Competition versions of the 18R-G and -GE include those used in rally Celicas of the period, one of which finished second in the 1977 RAC Rally. These had four-valve heads and were called 152E, they were of 89 mm × 80 mm (3.50 in × 3.15 in) bore and stroke and 1,995 or 1,998 cc (121.7 or 121.9 cu in) (depending on the source). The Group 4 rally version of the 152E had two twin-choke carburettors, and developed 240 PS (177 kW; 237 hp) at 9000 rpm. Higher tuned engines developed as much as 300 PS (221 kW; 296 hp) at 9,200 rpm. German racing team Schnitzer also developed a turbocharged silhouette racing version of the Celica, to take on the Porsche 935. With a KKK turbocharger, the Group 5 Celica developed 560 PS (412 kW; 552 hp) but reliability was less than satisfactory.
|18R-G||145 PS (107 kW; 143 hp) at 6400 rpm||18 kg⋅m (177 N⋅m; 130 lb⋅ft) at 5200 rpm||1972–1981||170 kg (375 lb)|
|18R-GR||140 PS (103 kW; 138 hp) at 6400 rpm||17.2 kg⋅m (169 N⋅m; 124 lb⋅ft) at 4800 rpm||1973–1975||low compression for regular fuel|
|18R-GU||130 PS (96 kW; 128 hp) at 5800 rpm||16.5 kg⋅m (162 N⋅m; 119 lb⋅ft) at 4800 rpm||1975–1978||182 kg (401 lb)||emissions control - Japan.|
|18R-GEU||135 PS (99 kW; 133 hp) at 5800 rpm||17.5 kg⋅m (172 N⋅m; 127 lb⋅ft) at 4800 rpm||1978–1982||166 kg (366 lb)||EFI, emissions control (Japan).|
- 1973-1981 Toyota Celica GT 2000
- 1982-1983 Toyota Celica GT 2000 (RA63)
- 1974-1983 Toyota Carina GT 2000
- 1978-1983 Toyota Celica Camry GT 2000
- 1973-1982 Toyota Corona GT 2000
The 2-valve SOHC 2.0 L (1,968 cc) 19R was produced from 1974 through 1977. Cylinder bore and stroke was 88.5 mm × 80 mm (3.48 in × 3.15 in). Its dimensions are the same as of the 18R, but it featured TTC-V, Toyota's licensed version of Honda's CVCC stratified charge combustion system. Output is 80 PS (59 kW; 79 hp). The 19R was a short-lived experiment by Toyota, and was only offered in Japanese market cars.
The 2-valve SOHC 2.2 L (2,190 cc) 20R was produced from 1975 through 1980. Cylinder bore and stroke was 88.5 mm × 89 mm (3.48 in × 3.50 in). Aluminum alloy heads were used.
Initial output was 72 kW (97 hp; 98 PS) at 4800 rpm (90 hp (67 kW; 91 PS) in California) and 162 N⋅m (119 lb⋅ft) at 2,800 rpm. Power was down slightly from 1978 through 1979 at 71 kW (95 hp; 97 PS) at 4800 rpm and 165 N⋅m (122 lb⋅ft) at 2400 rpm. The final version, from 1979 through 1980, was down again at 67 kW (90 hp; 91 PS) at 4800 rpm (still at 95 hp (71 kW; 96 PS) in Canada) and 165 N⋅m (122 lb⋅ft) at 2400 rpm.
- 1975-1980 Toyota Hilux
- 1975-1980 Toyota Celica (U.S. Version)
- 1975-1980 Toyota Corona (U.S. Version)
- Toyota Stout (RK110/111)
- Toyota Coaster (RB11)
The 2-valve SOHC 2.0 L (1,973 cc) 21R was produced from 1978 through 1987.
Cylinder bore and stroke was 84 mm × 89 mm (3.31 in × 3.50 in).
Output in 1978, constrained by emissions, was 78 kW (105 hp; 106 PS) at 5,200 rpm and 157 N⋅m (116 lb⋅ft) at 3,600 rpm. Air injection and emissions equipment for the 21R-C (1982–1985) dropped power down to 67 kW (90 hp; 91 PS) at 5,000 rpm. The air-injected Japanese version, the 21R-U, produced 78 kW (105 hp; 106 PS) at 5,200 rpm and 162 N⋅m (119 lb⋅ft) at 3,600 rpm but dropped to 75 kW (101 hp; 102 PS) at 5,400 rpm and 154 N⋅m (114 lb⋅ft) at 4,000 rpm in 1986.
- 1978-1982 Toyota Carina RA46-A, RA56-A
- 1978-1981 Toyota Celica RA46-B
- 1981-1983 Toyota Celica RA60-B
- 1978-1983 Toyota Corona RT133
- 1978-1980 Toyota Cressida/Corona Mark II/Chaser RX40, RX41
- 1980–1983 Toyota Cressida/Corona Mark II RX60
- 1979-198? Toyota HiAce Wagon RH23G
The 8-valve SOHC 2.4 L (2,366 cc) 22R was produced from 1981 through 1997.
Cylinder bore and stroke was 92 mm × 89 mm (3.62 in × 3.50 in).
Initial output was 72 kW (97 hp; 98 PS) at 4,800 rpm and 174 N⋅m (128 lb⋅ft) at 2,800 rpm.
By 1990 the 22R was producing 81 kW (109 hp; 110 PS) at 5,000 rpm and 187 N⋅m (138 lb⋅ft) at 3,400 rpm.
The first fuel injected 22R-E engines appeared in August 1982.
Output of these engines is commonly rated at 78 kW (105 hp; 106 PS) at 4,800 rpm and 185 N⋅m (136 lb⋅ft) at 2,800 rpm.
In 1985, the engine was significantly reworked, output was up to 84 kW (113 hp; 114 PS) at 4,800 rpm and 190 N⋅m (140 lb⋅ft) at 3,600 rpm. Many parts from the newer 22R/R-E are not compatible with those from the older pre-1985 engine. Non-compatible parts include the cylinder head, block, pistons and many of the associated parts such as the timing chain and cover, and water and oil pumps (although the oil pump internals are the same). These changes also affected the 22R, therefore one can consider the 85-95 22R-E as a fuel injected version of the 85-90 22R with only minor differences, if any.
Toyota swapped the dual-row timing chain used in older engines for a single-row chain with plastic guides in 1983. The new system reduced drag on the engine but introduced a new maintenance problem. After about 100,000 miles (160,934 km) of operation, the chain may stretch to the point that the hydraulic-operated chain tensioner cannot take up any more slack. The timing chain then impacts the plastic driver's side chain guide, breaking it within a short period of time and creating a noticeable chattering sound in the front of the engine, especially when cold. If the engine continues to be operated without the guide restraint, the chain will vibrate excessively on the driver's side and stretch rapidly. The result is any of several failure modes.
First, the loose chain will reduce ignition timing accuracy, which usually results in noticeably rough running. Second, it may jump a tooth on the drive sprocket or break entirely, which almost always results in major damage to an interference engine. Third, the stretched chain can slap against the side of the timing cover and wear through the metal into the coolant passage behind the water pump, resulting in major damage to both the oil and cooling systems (sometimes mis-diagnosed as a head gasket failure). The damaged aluminum timing cover is difficult to repair effectively and is typically replaced after such an event. Aftermarket timing-chain kits for the 22R/R-E typically include steel-backed guides that do not readily break even after the initial chain stretching has occurred, permitting the chain to run beyond the 100,000 miles (160,934 km) point without further incident. However, some Toyota mechanics will recommend the plastic guides as they will break when the timing chain is stretched; When the guides break a noticeable chatter is heard from the timing chain slapping on the cover, warning the operator of a worn timing chain.
The turbocharged 22R-TE (sold from late 1985 through 1988) produced 101 kW (135 hp; 137 PS) at 4,800 rpm and 234 N⋅m (173 lb⋅ft) at 2,800 rpm.
These engines are extremely well known for their durability, decent fuel efficiency and good low to mid range torque.
However, its weakness is high-end power. The 22R has a large displacement and a strong block, but its comparatively long stroke and restrictive head limit its use in high revving applications. Thus, the Toyota 18R-G, 2T-G, 4A-GE and 3S-GE 4-cylinder engines are better suited for performance applications.
A popular modification to the early 22R is to use a 20R head. Unlike popular lore, the 20R head does not have smaller combustion chambers. The misunderstanding originated when the 22R came out and an advantage was its higher compression ratio, so swapping a 20R block with a 22R, there was a compression increase. The 20R head has straight ports, so can flow better than the 22R head, improving high RPM power. The 20R head is a simple bolt-on modification for the pre-1985 block, but also requires the use of the 20R intake manifold, making it almost impossible (there’s a lot of matching necessary) to use with the 22R-E EFI system. For blocks 1985 and onwards, further modifications are required.
|22R||72 kW (97 hp; 98 PS) at 4,800 rpm||174 N⋅m (128 lb⋅ft) at 2,800 rpm||1981–1990||carb, dual row timing chain ('81-'82)
carb, single row timing chain ('83-'90)
|22R||81 kW (109 hp; 110 PS) at 5,000 rpm||187 N⋅m (138 lb⋅ft) at 3,400 rpm||1990–1995|
|22R-E||78 kW (105 hp; 106 PS) at 4,800 rpm||185 N⋅m (136 lb⋅ft) at 2,800 rpm||1983–1984||EFI, single row timing chain|
|22R-E||84 kW (113 hp; 114 PS) at 4,800 rpm||190 N⋅m (140 lb⋅ft) at 3,600 rpm||1985–1997||EFI, single row timing chain|
|22R-TE||101 kW (135 hp; 137 PS) at 4,800 rpm||234 N⋅m (173 lb⋅ft) at 2,800 rpm||1986–1988||turbocharged, single row timing chain|
- Corona 1500 Parts Catalog, No.53282-67
- Piston Ring Sets Price List (PDF), 18, Tokyo, Japan: Riken Corporation, November 2008, p. 71, archived from the original (PDF) on 2013-05-31
- 愛される車づくり。トヨタはあすにいどみます。 [Lovable car manufacture. Toyota dares to defy tomorrow.] (catalog) (in Japanese), Toyota Motor Co., 1972, p. 1
- Toyota Corona Deluxe, Parts Catalog, No.53212-68
- Wagon: Corona Mark II Wagon (sales sheet) (in Japanese), Toyota
- All About the Toyota Twin Cam, 2nd ed., Tokyo, Japan: Toyota Motor Company, 1984, p. 27
- Toyota Twin Cam, p. 6
- "Toyota Vehicle Identification Manual". Toyota Motor Sale Co., Ltd. - Export Parts Department. 1984. 97913-84.
- Braunschweig, Robert; Büschi, Hans-Ulrich, eds. (March 6, 1980). "Automobil Revue '80". 75. Berne, Switzerland: Hallwag, AG: 504.
- "New Mark II Van", Brochure (in Japanese), Toyota Motor Co., p. 16, December 1976, retrieved 2013-01-15[permanent dead link]
- Celica brochure. Toyota Japan. 1973.[permanent dead link]
- Toyota Twin Cam, p. 25
- "Toyota RA40 Celica, Modified 18R engine". Retrieved 2011-11-08.
- Chong, Rod (2009-02-19). "Bigger Than Life: The Schnitzer Celica". Speedhunters.com. Archived from the original on 2011-01-19. Retrieved 2011-01-31.
- Toyota Twin Cam, p. 7
- Hajek, Alexander. "Toyota Carina A12". Toyota Oldies. Retrieved 2012-10-03.
- "Catalogue vol. 23". 自動車ガイドブック [Automobile Guide Book] (in Japanese). Japan: Japan Automobile Manufacturers Association. 23: 99. 1976-10-20. 0053-760023-3400.
- "Catalogue vol. 25". 自動車ガイドブック [Japanese Motor Vehicles Guide Book] (in Japanese). Japan: Japan Automobile Manufacturers Association. 25: 295. 1978-10-10. 0053-780025-3400.
- "Toysport - 22R Tech Notes". 2000. Archived from the original on 2010-01-11. Retrieved 2009-10-07.
- "LC Engineering - Using a 20R Head on an 85-95 22RE Block". 2004. Retrieved 2009-10-07.