Open main menu

Wikipedia β

Tom-tom drum

  (Redirected from Tom-toms)

A tom-tom drum is a cylindrical drum with no snares, named from the Anglo-Indian and Sinhala language. It is commonly used in making drumfills. It was added to the drum kit in the early part of the 20th century. Most toms range in size between 6 and 20 inches (15 and 51 cm) in diameter, though floor toms can go as large as 24 inches (61 cm). It is not to be confused with a tam-tam, a gong.

The drum kit
Drum KitBass drumChina cymbalSnare drumSnare drumFloor tomFloor tomSplash cymbalRide cymbalTomsHi-hatCrash cymbalDrum hardwareDrum hardware
About this image
Not shown
See also

Contents

DefinitionEdit

A tom-tom drum is a cylindrical drum with no snares. The name came originally from the Anglo-Indian and Sinhala.[1]

Design historyEdit

The first drum kit tom-toms had no rims;[when?] the heads were tacked to the shell. As major drum manufacturers began to offer[when?] tuneable tom-toms with hoops and tuning lugs, a 12 in (30 cm) drum 8 inches (20 cm) deep became standard, mounted on the left side of the bass drum. Later a 16 in (41 cm) drum (16 inches deep) mounted on three legs (a floor tom) was added. Finally, a second drum was mounted on the right of the bass drum, a 13 in (33 cm) diameter drum 9 inches (23 cm) deep. The 8"x12" Tom along with the 9"x13" tom are common referred to as traditional sizes. Along with a 14 in (36 cm) snare drum and a bass drum of varying size, these three made up the standard kit of five drums for most of the second half of the 20th century.

With the advent of arena rock in 70's many drum companies began to offer toms in deeper sizes. the mounted tom-toms, known as hanging toms or rack toms, were deepened by 3 and 4 inches each. These sizes being called power toms usually measure as 11"x12" and 12"x13" . Extra-deep hanging toms, known as cannon depth measuring as 12"x12", were very popular in the 1980's. All these were double-headed. Currently it is most common to see 9"x12" and 10"x13" toms with either 12"x14" and 14"x16" or 14"x14" and 16"x16" floor toms being the most common sizes offered by drum companies.

Modern versionsEdit

 
12 in × 8 in (30 cm × 20 cm) rack tom mounted to a stand

A wide variety of configurations have been vailable and in use at all levels from advanced student kits upwards. Most toms range in size between 6 and 20 inches (15 and 51 cm) in diameter, though floor toms can go as large as 24 inches (61 cm).

Classic rack setupsEdit

Standard diameters

In the 50s and early 60s, it was common to have only a single hanging tom (a 13") and a single floor tom (16").

A basic rock configuration consists of 12" and 13" hanging toms, and a 16" floor tom with diameter × depth in inches used throughout this article. For a more detailed description of the conventions and their usage, see drum size conventions.

A basic fusion configuration refers to a set-up which has 10", 12" and 14" diameter toms, Note that these terms do not imply drum depths, so for example, the 14" in a fusion setup could have depth 10, 11, 12, or could be a 14×14 floor tom.[citation needed]

The terms "fusion" and "rock" are marketing terms invented by drum manufacturing companies, and there is no absolute definition for them; more a case of an accepted norm.[2][3][4][5]

 
Tom-toms mounted on a bass drum
Standard depths

In the 1950-1980s the standard depth rack toms were 12×8 and 13×9. This "classic" configuration is still popular. "FAST" sizes are 10×8, 12×9, 13×10, etc, a marketing term used by DW, although not unique to DW, but with all drum manufacturers. The "New standard" sizes - 10×9, 12×10, 13×11, etc. are 2" deeper than what was considered "standard" in the 1950s. Power toms are one inch deeper than standard, so standard sizes are 10×9 or 10×10, 12×11, 13×12, which overtook the classic setup in popularity during the 1980s. Square - 10×10, 12×12, 13×13, etc, have been common in the 80s and 90s. Hyperdrive are shallow depths made popular initially by Tama: 10×6.5, 12×7, 13×7.5, etc.

VariationsEdit

Single-headedEdit

 
In the 1970s, Alex Van Halen simply removed the bottom heads from his hanging toms to create concert toms

Single-headed tom-toms, also known as concert toms, have also been used in drum kits, though their use has fallen off in popularity since the 1970s. Concert toms have a single head and a shell slightly shallower than the corresponding double-headed tom. Phil Collins still uses four single-headed rack-mount toms and two floor toms (Gretsch) in his setup. They are generally easier to tune as they have no bottom head to adjust.

The term concert tom has also been used to describe double- or single-headed tom-tom drums designed for use in a concert band rather than in a drum kit.[6]

RototomsEdit

Rototoms have no shell at all, just a single head and a steel frame. Unlike most other drums, they have a variable definite pitch and some composers write for them as a tuned instrument, demanding specific notes. They can be tuned quickly by rotating the head. Since the head rotates on a thread, this raises or lowers the head relative to the rim of the drum and so increases or decreases the tension in the head.

Gong bass drumEdit

A gong bass drum (also known as "gong drum"), is a large, single-headed tom often sized at 20 in (51 cm) or 22 in (56 cm), with the drumhead being 2 in (5.1 cm) larger than the shell. The sound produced is similar to a bass drum, though it is more open and has longer sustain. They can be mounted with standard floor tom legs, though many drummers mount them at an angle next to the floor tom(s). Notable users include Neil Peart, Stewart Copeland, Bill Bruford, Simon Phillips, Jason Bittner, Mike Portnoy and Dom Howard.

Floor tomEdit

A floor tom is a double-skin drum, most often but not always as deep as its diameter, traditionally mounted on three legs and to the drummer's right for a right-handed drummer. It is normally the deepest-toned drum played by sticks in the kit, above the bass drum but below all others, and the most resonant, more so than even the bass drum.

Construction and manufactureEdit

Typically, a tom consists of a shell, chromed or plated metal hardware and head. Shell depth standards vary according to the era of manufacture and the drum style. Tom-toms are typically made in diameters of: 6 in (15 cm), 8 in (20 cm), 10 in (25 cm), 12 in (30 cm), 13 in (33 cm), 14 in (36 cm), 15 in (38 cm), 16 in (41 cm) and 18 in (46 cm), with heads to fit.

Tom-toms can be fitted with an adjustable mounting for a floor stand, or attachment to a bass drum or marching rig. They can be single- or double-headed.

ShellEdit

A crucial factor in achieving superior tone quality and insuring durability, especially with wood, is the creation of perfectly round shells and much research and development has been put into this manufacturing technology.

Shells are often constructed of 6–8 wood plies (often using different woods e. g. mahogany and falkata — birch or maple are commonly used for single-wood plies), solid wood (turned) or man-made materials (e. g. fibreglass, pressed steel, acrylic glass, resin-composite). Wood or composite shells can be finished by laminating in plastic in a large variety of colours and effects (e. g. sparkle or polychromatic); natural wood may be stained or left natural and painted with clear lacquer. Steel is usually chromed, fibreglass self-coloured and acrylic glass tinted or clear.

HardwareEdit

 
A shell-mounted clamp attached to ball-head floor stand.

For Drum hardware one or two cast or pressed metal rims attach by threaded tension rods or lugs to nut boxes bolted onto the shell and hold the heads onto the bearing edges of the shell. The tension rod assembly needs to be precision-machined, cast and fitted to enable predictable and secure tuning without inhibiting resonance or introducing extra vibration. All components will be placed under great tension and experience added stresses from playing.

Mounting systems vary greatly, from a simple cast block on the shell which accepts and clamps to a rod attached to a clamp or holder to much more sophisticated arrangements where there is no attachment to the shell, instead a frame clamps to the tuning lugs.

Another sort of rod clamp system allows attachment of the drum to the tom holder without the need of a hole in the drum shell for the rod to pass through. The clamp is attached to the shell at the nodal point with two bolts so as to allow the shell to vibrate freely without degrading the shell's dynamic range and sustain. The nodal point is the location on a shell with the least amount of vibration allowing for the mount to have minimal effect on the resonance of the shell.

Some drummers use a snare stand to hold and to make it easier to position the tom.

SoundEdit

 
Standard drum notation for (up to six) toms.  play 
Audio samples
Component Content Audio (Ogg Vorbis)
Toms 8-inch rack tom   59 KB 
12-inch rack tom   41 KB 
Floor tom   39 KB 
See the Drums page at Wikimedia Commons for more

ReferencesEdit

  1. ^ Oxford English Dictionary, 1st Edition, Oxford: OUP, 1928
  2. ^ The Drum: A History, By Matt Dean
  3. ^ Vintage Guide to Drum Collecting: Essential Guide for Collectors, By Aldridge
  4. ^ Slingerland Drum Company 60's catalogue
  5. ^ Pearl Drum Company 60's catalogue
  6. ^ http://www.pearldrum.com/Products/Concert/Concert-Toms/PTA-Concert-Toms.aspx retrieved 28 February 2012 Pearl's Philharmonic Series Concert Toms... Double-headed and single-headed configurations available...Pearldrum.com

NotesEdit