Talk:Maxwell–Boltzmann statistics

Latest comment: 2 months ago by Evgeny in topic Oxygen particles?

Wiki Education Foundation-supported course assignment edit

  This article was the subject of a Wiki Education Foundation-supported course assignment, between 27 August 2021 and 19 December 2021. Further details are available on the course page. Student editor(s): 0.25cm. Peer reviewers: Mumtaziah, Ajp256, Leolsz.

Above undated message substituted from Template:Dashboard.wikiedu.org assignment by PrimeBOT (talk) 03:40, 17 January 2022 (UTC)Reply

Derivation edit

I think this derivation is more complete than the one in the "derivation of the partition function" article. I also think that the derivation belongs here rather than in the latter article because the Bose-Einstein statistics and Fermi-Dirac statistics articles each contain their own derivation, with all three articles now being very similar in development. Eventually I would like to remove or reduce the derivation from the partition function article and link to this one instead. This would not affect the canonical and grand canonical material in the partition function article. PAR 07:16, 29 October 2005 (UTC)Reply

more complete? in what sense? because it's more tedious? the longer derivations in the FD, BE, and MB statistics articles are of the physically un-illuminating and unnecessarily contorted variety. partition functions are, more or less, the multiplicity of the system. by exponentiating entropy and use partition functions, dealing with multiplicities directly can be avoided entirely. no graduate textbook i've seen takes this unappealing approach. Mct mht 18:00, 27 April 2006 (UTC)Reply
Calling the derivation "tedious", "contorted", and "unappealing" implies that you know of a derivation that is less so, without sacrificing rigor. Please modify this page accordingly. PAR 23:39, 13 May 2006 (UTC)Reply

I AGREE WITH USER :PAR|PAR

let me qualify my comment a bit. IMHO, the article derivation of the partition function needs to go or a rewrite. i did not mean to compare with that article. Mct mht 23:42, 18 May 2006 (UTC)Reply

I really liked the derivation of the microcanonical ensemble in this article. It is just at the right level to be able to understand where the Boltzman distribution, and entropy come from. I had a little trouble to go from ln W to dE, but the proof was very readable and helpful. 128.163.8.203 (talk) 14:17, 29 February 2016 (UTC)Reply

disagree with combining Maxwell-Boltzmann distribution with this article edit

In general, probability distributions have their own pages. I'd say the Maxwell-Boltzmann distribution should be no different. Also, the theorem presented on this page CAN be applied to moledular motion, but it really applies to all chemical (physical) systems and is the basis for a heck of a lot more than the Maxwell-Boltzmann distribution. Pdbailey 02:35, 18 April 2006 (UTC)Reply

      • I disagree with combining [Maxwell-Boltzmann distribution] with this article ***

It is a mater of audience and communication not aethestics of MAth. People who want to understand a simple introduction to this subject will read the first few paragraphs. e.g. my usage was for a 16-year who wanted a layer more depth than "collision theory". Communication is about context as well as content therefore embedding a simple introduction in a more complex context will reduce he access and usefulness. (Stefan@wasilewski.com)

The issue isn't at all about "aesthetics of math". MB stats and MB distribution are completely different things. It's like merging carpentry into hammer. Capefeather (talk) 20:53, 23 April 2009 (UTC)Reply
  • DISAGREE with combining. You can use MB statistics to derive MB distribution which is a special case of E=mv^2/2. There are many other degrees of freedom, many other expressions for their energy. MB distribution is useless for them, but MB statistics will give you the answer. PAR (talk) 17:22, 5 March 2010 (UTC)Reply

mistake in Boltzmann counting edit

the reasoning given in Boltzmann counting is not quite right. a direct calculation shows that the "corrected" multiplicity W still fails to given additive entropy. for example, multiply each   by 2 and the entropy fails to double. something is wrong.

the context in which this problem is brough up also seems to be unusual. the common approach is calculate the entropy for ideal gas, by computing directly the available volume of the phase space, then seeing that an ad hoc reduction by a factor of   is required. it is called ad hoc precisely because it is exact only if the expected value of the distribution numbers   is much less then 1. this defines the classical limit, and Gibb's reduction factor only fixes the counting in the classical limit. this could be the problem here, as no such assumptions, that the system is in the classical limit, was made in the first derivation in the article. therefore using the expression obtained in the derivation leads to the incorrectness on Boltzmann counting.

if no justification is given or changes made, that section should be deleted. Mct mht 05:09, 24 May 2006 (UTC)Reply

in fact, it obviously doesn't make sense to use the Gibbs reduction factor here. let's assume there's no degeneracy and   for all i. if you divide by the Gibbs factor  , this leads to an entropy that's always non-positive, clearly nonsense. section will be deleted. Mct mht 05:52, 24 May 2006 (UTC)Reply

Question: is the final term in the W equation actually correct? Should it be (N - N1 - . . . - Nk-1)! in the numerator? [12:31, 11 July 2006 (AGS)]

In the "A derivation of the Maxwell–Boltzmann distribution" there is a "clarification needed" tag that I have been thinking about removing.   can be easily derived from W,   and the second law, but the derivation of   requires correct Boltzmann counting, i.e. dividing the present equation for W by N! (i.e., removing N! from in front of the product). Correct Boltzmann counting assumes   so the example for   is not a valid criticism. It also assumes   as mentioned above. I don't understand why replacing   by   should double the entropy. The bottom line is that dividing the present equation for W by N! amounts to correct Boltzmann counting under the specified conditions, and would allow an easy identification of  , and the clarification tag could be removed. PAR (talk) 04:40, 3 November 2011 (UTC)Reply

Main equation error? edit

Is the main equation really correct?

 

Shouldn't it be:

 

In the first derivation one line reads:

 

This line directly conflicts with the main equation.

Reply: the eqn you're referring to from the introduction seems ok. Ni is the occupation number for the i-th state, and N is the total number of particles. so Ni/N is essentially the probability that a member of the ensemble chosen at random would be in the i-th state, which should be   divided by the normalizing constant Z. on the other hand, as you pointed out, something doesn't quite make sense with the eqn  . that section needs a careful look-over. perhaps a clean-up tag should be attached to it. Mct mht 15:29, 21 February 2007 (UTC)Reply
Reply: I agree with the original post.   is correct, but   is incorrect. It should be   (note that there is no longer an   in the denominator of the LHS), as was stated in the original post. If there are no rebuttals, I will make the change soon. 27 June 2009 —Preceding unsigned comment added by 18.100.0.121 (talk) 16:05, 27 June 2009 (UTC)Reply

Not so fast edit

<Traumantischer 18:33, 26 February 2007 (UTC)> I didn't like that after a lot of detail in the beginning of the presentation, the Maxwell-Boltzmann statistics is pulled out of the hat. So I propose to somehow mangle the below derivation, replacing the short form:Reply

Using Stirling's approximation for the factorials and taking the derivative with respect to  , and setting the result to zero and solving for   yields the Maxwell-Boltzmann population numbers.:

by the following (please revise):

With Stirling's approximation in the form

 

and neglecting some constants, we obtain

 

We seek now extrema by setting

 

For convenience we can replace the expression   by   and obtain solutions

 

However,   and   still need to be determined. Since we have

 

it is easy to see that

 

So one gets:

 

end of insertion

<Traumantischer 18:33, 26 February 2007 (UTC)>Reply

Quantization? edit

Suppose we have a number of energy levels, labelled by index i , each level having energy εi and containing a total of Ni particles. To begin with, let's ignore the degeneracy problem. Assume that there is only one way to put Ni particles into energy level i.

Does a number of energy levels mean that energy isn't continuous. But rather quantized? For instances, restricting to energy levels of 1.2, 2.4, 3.6, 4.8, 6.0 ... would imply that a quanta of thermal energy carries 1.2 unit of energy.

If it is continuous it would mean I can always find another state between states. But that would lead to the integration of the probability of all states to go to infinite, would it not?

And there's another problem: it's states that we put distinguishable particles into energy levels.

But if the quantization of thermal energy is correct. Why not put distinguishable energy quanta into distinguishable particles instead and than count their number of ways and than find the distribution with the highest value?

I was wondering if I've put this question into the right place. Do inform me where to post this question if there is one. I remember there was a help desk, but couldn't find it. Is it more appropriate? User:Tikai 16:22, 2 May 2008 (UTC)Reply

Modified work based on "Physics", by Alonso & Finn. Feel free to adopt. YES on the merging proposal to increase consistency. edit

Modeling of statistical thermodynamics: The Maxwell - Boltzmann distribution edit

Let an isolated system be composed of a large number   of particles, each being able to assume several energy states  . [1]If at a particular time the particles are distributed in such a way that   have energy  ,   have energy   and so on, then

 

The set   constitutes a partition which determines a microstate of the system. The macrostate determined by   may correspond to a number of different partitions (microstates).[2] However, it is logical to assert that for a specific macrostate there is a class of related microstates most probable to occur, in which case the system is said to be in statistical equilibrium. The system will not deviate from such stability (except for minor statistical fluctuations) unless disturbed by an external factor.

Under certain assumptions it can be shown that for the most probable or equilibrium partition it is

 

where   is a temperature – related parameter,   is a constant that depends on the structure of the system and   is the intrinsic probability of the energy state  , also called degeneracy of the energy level.

Provided the system is in statistical equilibrium, the following relations hold:

 

where   is the Boltzmann constant and   is the temperature of the system. It can be proven that if two interacting systems of particles are in statistical equilibrium then they are in thermal equilibrium, i.e. they have the same temperature.

For an ideal gas,   and


 

With the above notions, the first law of thermodynamics for a non - isolated system becomes

 

while the second law of thermodynamics is expressed as [3]

 

where   is the probability of the partition corresponding to the state of the system and   is the entropy.

Notes edit

  1. ^ “Particles” may be fundamental particles, atoms or molecules. In any case they are assumed identical. The energy states may be quantized or vary continuously.
  2. ^ Macrostate is also determined by the structure of the particles and some other external parameters. So far it has been tacitly assumed that all particles are interacting in a negligible way (such as in a gas) so that a well defined energy can be assigned to each one. In special cases the average potential energy stemming from an average interaction between particles can be evaluated.
  3. ^ Even if the system is not in statistical equilibrium.

Rickproser (talk) 00:11, 2 January 2010 (UTC)Reply

Is Bose-Einstein expression for W correct? edit

Is this expression below right?

 

I suspected it is not since assuming

 

leads to

 

Thinking twice, this may just be right: there is only one configuration   if the particles are indistinguishable! — Preceding unsigned comment added by Maajdl (talkcontribs) 06:56, 11 December 2017 (UTC)Reply

Edit in text between distinguishable/indistinguishable edit

Please evaluate whether my last edit is correct or not since those two letters change the meaning of the paragraph! Thank you. Bcpicao (talk) 22:45, 25 January 2023 (UTC)Reply

Nope, the original version was correct. Evgeny (talk) 21:01, 30 January 2023 (UTC)Reply

Oxygen particles? edit

In the figure caption ‘oxygen particles’ are mentioned. It should be specified whether atoms, molecules, ozone or pieces of frozen oxygen 😀 are meant. If these are not atoms, rotation and vibration come into play. If they are, what’s keeping them from forming dimers? Aoosten (talk) 11:59, 6 March 2024 (UTC)Reply

Right, it was ambiguous. I've changed it to "molecules". As to your second comment, why would an internal degree of freedom (rotational or vibrational) make any impact on the velocity distribution? Evgeny (talk) 12:48, 6 March 2024 (UTC)Reply