Stone flaming or thermaling is the application of high temperature to the surface of stone to make it look like natural weathering.[1][2] The sudden application of a torch to the surface of stone causes the surface layer to expand and flake off, exposing rough stone.

Manually flaming the surface of a stone slab

Flaming works well on granite, because granite is made up of minerals with differing heat expansion rates.

Process

edit
 
Machine flaming the surface of a stone slab

After removing a rock from a quarry, the rock is sliced into multiple flat slabs using a diamond gang saw. The saw leaves flat surfaces with circular marks. Flaming is done by wetting, and then running an oxygen-acetylene or oxygen-propane torch over the surface. As shown in both pictures, the torch is usually held at a 45-degree angle to the stone, so that released glowing sand grains are blown away in a harmless direction.

Alternatives

edit

Alternative techniques for creating a rough surface on sawed stone include:

See also

edit

Flame treatment – application of a gas flame to the surface of a material to improve adhesion or other surface characteristics

References

edit
  1. ^ Chacon, Mark (1999). Architectural stone : fabrication, installation, and selection. New York: Wiley. ISBN 047124659X.
  2. ^ "Granite and quartzite stone slabs processing by oxy-methane flaming" (PDF). European Commission.
edit