South African Class 19A 4-8-2

The South African Railways Class 19A 4-8-2 of 1929 was a steam locomotive.

South African Class 19A & 19AR 4-8-2
Class 19A no. 685 at De Aar, 16 October 1978
Type and origin
♠ Class 19A as built with a round-topped firebox
Class 19AR rebuilt with a Watson Standard boiler
Power typeSteam
DesignerSouth African Railways
(Col F.R. Collins DSO)
BuilderSwiss Locomotive and Machine
Serial number3300-3335
ModelClass 19A
Build date1929
Total produced36
Specifications
Configuration:
 • Whyte4-8-2 (Mountain)
 • UIC2'D1'h2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28+12 in (724 mm)
Coupled dia.51 in (1,295 mm)
Trailing dia.33 in (838 mm)
Tender wheels34 in (864 mm)
Wheelbase58 ft 7+58 in (17,872 mm) ​
 • Axle spacing
(Asymmetrical)
1-2: 4 ft 10 in (1,473 mm)
2-3: 4 ft 9 in (1,448 mm)
3-4: 4 ft 10 in (1,473 mm)
 • Engine32 ft 2 in (9,804 mm)
 • Leading6 ft 2 in (1,880 mm)
 • Coupled14 ft 5 in (4,394 mm)
 • Tender16 ft 9 in (5,105 mm)
 • Tender bogie4 ft 7 in (1,397 mm)
Length:
 • Over couplers67 ft 6 in (20,574 mm)
Height12 ft 10+78 in (3,934 mm)
12 ft 11+78 in (3,959 mm)
Frame typeBar
Axle load♠ 13 LT 4 cwt (13,410 kg)
13 LT 1 cwt (13,260 kg) ​
 • Leading♠ 13 LT 12 cwt (13,820 kg)
13 LT 12 cwt (13,820 kg)
 • 1st coupled♠ 12 LT 17 cwt (13,060 kg)
12 LT 15 cwt (12,950 kg)
 • 2nd coupled♠ 13 LT 4 cwt (13,410 kg)
13 LT 1 cwt (13,260 kg)
 • 3rd coupled♠ 12 LT 17 cwt (13,060 kg)
12 LT 15 cwt (12,950 kg)
 • 4th coupled♠ 12 LT 15 cwt (12,950 kg)
12 LT 12 cwt (12,800 kg)
 • Trailing♠ 9 LT 18 cwt (10,060 kg)
11 LT 7 cwt (11,530 kg)
 • Tender bogieBogie 1: 25 LT 15 cwt (26,160 kg)
Bogie 2: 25 LT 4 cwt (25,600 kg)
 • Tender axle12 LT 17 cwt 2 qtr (13,080 kg)
Adhesive weight♠ 51 LT 13 cwt (52,480 kg)
51 LT 3 cwt (51,970 kg)
Loco weight♠ 75 LT 3 cwt (76,360 kg)
76 LT 2 cwt (77,320 kg)
Tender weight50 LT 19 cwt (51,770 kg)
Total weight♠ 126 LT 2 cwt (128,100 kg)
127 LT 1 cwt (129,100 kg)
Tender typeMP (2-axle bogies)
MP, MP1, MR, MS, MX, MY, MY1 permitted
Fuel typeCoal
Fuel capacity9 LT 4 cwt (9.3 t)
Water cap.4,250 imp gal (19,300 L)
Firebox:
 • TypeRound-top
 • Grate area36 sq ft (3.3 m2)
Boiler:
 • ModelWatson Standard no. 1A
 • Pitch♠ 8 ft (2,438 mm)
8 ft 1 in (2,464 mm)
 • Diameter4 ft 10+14 in (1,480 mm)
5 ft (1,524 mm)
 • Tube plates20 ft 38 in (6,106 mm)
20 ft 2 in (6,147 mm)
 • Small tubes86: 2+14 in (57 mm)
76: 2+12 in (64 mm)
 • Large tubes18: 5+12 in (140 mm)
24: 5+12 in (140 mm)
Boiler pressure200 psi (1,379 kPa)
Safety valvePop
Heating surface:
 • Firebox♠ 125 sq ft (11.6 m2)
123 sq ft (11.4 m2)
 • Tubes♠ 1,527 sq ft (141.9 m2)
1,700 sq ft (160 m2)
 • Arch tubes♠ 15 sq ft (1.4 m2)
16 sq ft (1.5 m2)
 • Total surface♠ 1,667 sq ft (154.9 m2)
1,839 sq ft (170.8 m2)
Superheater:
 • Heating area♠ 415 sq ft (38.6 m2)
404 sq ft (37.5 m2)
CylindersTwo
Cylinder size19+12 in (495 mm) bore
26 in (660 mm) stroke
Valve gearWalschaerts
Valve typePiston
CouplersAAR knuckle
Performance figures
Tractive effort 29,080 lbf (129.4 kN) @ 75%
Career
OperatorsSouth African Railways
ClassClass 19A, 19AR
Number in class36
Numbers675-710
Delivered1929
First run1929
Withdrawnc. 1977
The leading coupled axle had flangeless wheels

In 1929, the South African Railways placed 36 Class 19A steam locomotives with a 4-8-2 Mountain type wheel arrangement in service. Five of them were later reboilered and reclassified to Class 19AR.[1][2][3][4]

Manufacturer

edit

The Class 19A 4-8-2 Mountain type steam locomotive was a later modified version of the successful Class 19 which had been introduced a year earlier. Thirty-six Class 19A engines were delivered by Swiss Locomotive and Machine Works (SLM) of Winterthur in 1929, numbered in the range from 675 to 710.[2][5][6]

Characteristics

edit
 
Col F.R. Collins, DSO

Like the Class 19, the Class 19A also had Walschaerts valve gear and a bar frame. Col F.R. Collins DSO, Chief Mechanical Engineer (CME) of the South African Railways (SAR) at the time, redesigned the Class 19 to achieve a lighter axle loading by reducing the coupled wheel diameters from 54 to 51 inches (1,372 to 1,295 millimetres), reducing the cylinder diameter from 21 to 19+12 inches (533 to 495 millimetres) and by using a slightly smaller boiler.[1][2][5]

The reduction in axle load was to suit some of the lighter branch lines and, as part of the weight reduction, the Class 19A was delivered with a new smaller Type MP tender with a fuel capacity of 9 long tons 4 hundredweight (9.3 tonnes), a water capacity of 4,250 imperial gallons (19,300 litres) and a maximum axle load of 12 long tons 17 hundredweight 2 quarters (13,080 kilograms). The leading coupled wheels had flangeless tyres, but these were later flanged.[2]

While the aim was to reduce the locomotive's total weight for use on some of the more lightly laid branch lines, the actual achieved weight saving was a mere four tons which could hardly have justified the cost of redesigning.[5]

The trailing Bissel truck was constructed with three holes to enable the compensating beam to be fitted at three locations which enabled it to be used to redistribute the engine's weight on the trailing axle. The axle load weights as listed for the Class 19A are with the trailing truck compensating beam pin in the leading of the three holes. The axle load weights as listed for the Class 19AR are with the trailing truck compensating beam pin in the centre hole.[1][3][4]

Watson Standard boilers

edit

From the 1930s, many serving locomotives were reboilered with a standard boiler type designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[3][4][6]

Five Class 19A locomotives, numbers 678, 693, 696, 700 and 706, were reboilered with Watson Standard no. 1A boilers and designated Class 19AR. In the reboilering process, at least two of the Class 19AR locomotives, numbers 693 and 696, received domeless boilers from the first batch of Class 19D locomotives which were delivered new with domeless Watson Standard boilers.[3][4][5][6]

The reboilered Class 19AR locomotives gained less than a ton in weight during the modification process. While most locomotive classes which were reboilered with Watson Standard boilers were simultaneously equipped with Watson cabs with slanted fronts, some of the Class 19AR locomotives retained their original cabs with vertical fronts.[7]

On the reboilered Class 19AR there were three versions of cab, since no. 696 had a slanted cab from the running board up and the remains of the squared front cab from the running board down. Apart from the slanted front of the Watson cab, an obvious difference between an original and a Watson Standard reboilered locomotive is usually the cover of the multiple valve regulator which is located in the smokebox, the rectangular object visible just to the rear of the chimney on the reboilered locomotive.[3][4]

Service

edit

South African Railways

edit

The Class 19A fleet initially served on all systems of the SAR, but were later based mainly at Mason's Mill, Estcourt and Glencoe in Natal, at East London, Queenstown and Burgersdorp in the Eastern Cape, at Cape Town in the Western Cape and a few in the Western Transvaal.[5]

No. 700 was written off after an accident and by 1977 the rest were all withdrawn from Railways service. Numbers 685, 692 and 693 are known to still survive, no. 685 staged in the open at Queenstown in the Eastern Cape, no. 692 plinthed at Sterkstroom in the Eastern Cape and no. 693 staged at Millsite in Krugersdorp.[5][6][8][9]

 

The number plate of no. 685, depicted alongside as it is displayed in the Outeniqua Transport Museum in George, is incorrectly inscribed "19AR" since that locomotive was retired without being reboilered with a Watson Standard boiler. The engine was photographed, still with its original boiler, as late as April 1970, fifteen years into electrification and dieselisation of the SAR and with steam traction already largely relegated to shunting and pickup work.

Similarly, the picture of the Class 19A rusting at Queenstown, shown below with the number 693 hand-painted on the cabside, is actually of Class 19A no. 685. It still has an as-delivered boiler while no. 693 was reboilered with a domeless Class 19D boiler. Both locomotives had been set aside by the Transnet Heritage Foundation for preservation, with no. 685 staged at Queenstown and no. 693 at Millsite in Krugersdorp, but each somehow had the other's number painted on their cabsides after their number plates were removed.[8]

Industrial

edit

After being retired from SAR service, several of these locomotives were sold into a second career in industrial service.[5]

  • Numbers 678 and 683 went to Tweefontein United Collieries. No. 678 later went to Witbank Consolidated Collieries.
  • No. 679 went to Apex Mines at Greenside, later to the Fluor for Sasol plant and eventually to Dunn's.
  • Numbers 684 and 691 went to Gledhow Sugar Mill where they were named "Umvoti" and "Blythedale" respectively. No. 684 later went to Umgala Colliery.
  • Numbers 689 and 707 went to Platberg Colliery.
  • No. 710 went to Butakon Limited, then to Southern Cross Steel Company in Middelburg, Transvaal, and eventually to Umgala Colliery at Utrecht in Natal.

Preservation

edit
Number Works nmr THF / Private Leaselend / Owner Current Location Outside South Africa ?
679 SWISS 3304 THF Witbank Locomotive Depot
685 SWISS 3310 THF Krugersdorp Locomotive Depot
692 SWISS 3317 Private Municipality Sterkstroom (Town Centre)
693 SWISS 3318 THF Queenstown Locomotive Depot 19Ar (reboilered)(Standard 1A boiler)
696 SWISS 3321 THF Natal Railway Museum Hillton Station 19Ar (reboilered)(Domeless 19D boiler)

Illustration

edit

References

edit
  1. ^ a b c Holland, D. F. (1972). Steam Locomotives of the South African Railways. Vol. 2: 1910-1955 (1st ed.). Newton Abbott, England: David & Charles. pp. 62–63. ISBN 978-0-7153-5427-8.
  2. ^ a b c d Espitalier, T.J.; Day, W.A.J. (1946). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways (Continued). South African Railways and Harbours Magazine, Jul 1946. pp. 541-542.
  3. ^ a b c d e South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 45.
  4. ^ a b c d e South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 21-21a, 26-27, 45.
  5. ^ a b c d e f g Durrant, AE (1989). Twilight of South African Steam (1st ed.). Newton Abbott: David & Charles. p. 99. ISBN 0715386387.
  6. ^ a b c d Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 10–11, 70. ISBN 0869772112.
  7. ^ Dulez, Jean A. (2012). Railways of Southern Africa 150 Years (Commemorating One Hundred and Fifty Years of Railways on the Sub-Continent – Complete Motive Power Classifications and Famous Trains – 1860–2011) (1st ed.). Garden View, Johannesburg, South Africa: Vidrail Productions. pp. 140–141. ISBN 9 780620 512282.
  8. ^ a b Final SAHRA List, p. 18, Category C Locomotives (For Disposal): Class 19A/19AR
  9. ^ Sterkstroom, Municipality - SAR Class 19A No 692