SolarWall is the brand name of a transpired collector designed and manufactured by Conserval Engineering. Conserval Engineering is based in Toronto, Ontario, Canada.

History and design

edit

The SolarWall design was developed in 1989 by John Hollick of Conserval Engineering with assistance from Natural Resources Canada and the United States Department of Energy's National Renewable Energy Laboratory (NREL).[1][2][3] The system consists of perforated metal panels mounted on a building's sun-facing exterior wall, the panels absorb heat from the sun and in turn heat the air space between the panel and the building's wall. The heated air is then pulled into the building's ventilation or HVAC system via a fan, saving building owners on their heating costs and reducing the amount of fossil fuels used.[3] According to Mother Earth News, for every 5 square metres (54 sq ft) of SolarWall panels installed, about 1 ton of carbon dioxide emissions is displaced each year.[2] An unglazed design is used for heating or preheating large volumes of fresh air, and a partially glazed 2-stage heater is available for achieving higher temperatures when heating buildings in colder climates. The SolarWall technology can also be installed as a hybrid solar system that generates both heat and electricity from the same surface area. By combining photovoltaics with the air heating technology, the heat produced by the solar panels is removed and drawn into the collector, helping to cool the solar panels and preheat the building's ventilation system at the same time.[4]

Compared to traditional roof-mounted solar thermal panels designed to heat domestic hot water, a vertical orientation eliminates any snow buildup and was found to increase winter solar gain, being angled more towards the lower winter solar angle. Reflective snow on the ground was found to increase solar energy as much as 50%.[citation needed]

Three of Conserval's early SolarWall installations have been closely monitored to determine real energy savings. In 1990, Ford Motor Company installed a system on their Oakville, Ontario manufacturing plant, saving approximately 17% on their heating costs at that plant alone.[1] The company eventually installed six more SolarWall systems on other facilities, and as of 2014 have reportedly saved more than $10 million over all their installations.[3] In 1991, General Motors had a system installed at their Oshawa, Ontario plant and, as of 1998, reported a savings of approximately $10,200 per year. Another collector installed at NREL in Golden, Colorado in 1991 is saving about 14,310 kWh of electricity annually, a reported 25.7% decrease.[1] According to Solar Energy Industries Association, over 5,000,000 square feet (460,000 m2) of these panels were in operation as of 2015.[citation needed]

Awards

edit

SolarWall and its parent company Conserval have received a number of awards:[1]

See also

edit

References

edit
  1. ^ a b c d Transpired Collectors (Solar Preheaters for Outdoor Ventilation Air). Federal Energy Management Program, U.S. Department of Energy. Federal Technology Alert #DOE/GO-10098-528. April 1998.
  2. ^ a b Siegele, Lindsey. Solar Air Heating Technology: Transpired air collectors, marketed as SolarWall, bring solar air heating to businesses, warehouses and even residential buildings. Mother Earth News. 8 December 2010.
  3. ^ a b c Dodge, David. How We Made Our Own Solar Air Heater for Under $100. Huffington Post. 1 December 2014.
  4. ^ "Solar Solutions".
  5. ^ "Canadian SolarWall ranked with top inventions in New York". 3 June 2014.