Sodium monothiophosphate

Sodium monothiophosphate, or sodium phosphorothioate, is an inorganic compound with the chemical formula Na3PO3S. It is a sodium salt of monothiophosphoric acid (H3PO3S). Sodium monothiophosphate forms hydrates Na3PO3xH2O. The anhydrous form and all hydrates are white solids. The anhydrous salt (x = 0) (Na3PO3S) decomposes without melting at 120-125 °C. More common is the dodecahydrate (Na3PO3S·12H2O). A nonahydrate is also known (Na3PO3S·9H2O).

Sodium monothiophosphate
Molecular model of sodium monothiophosphate
Names
IUPAC name
Sodium monothiophosphate
Identifiers
3D model (JSmol)
ECHA InfoCard 100.030.224 Edit this at Wikidata
EC Number
  • 233-26-1
UNII
  • InChI=1S/3Na.H3O3PS/c;;;1-4(2,3)5/h;;;(H3,1,2,3,5)
  • [O-]P(=S)([O-])[O-].[Na+].[Na+].[Na+]
Properties
Na3PO3S
Molar mass 180.00 g·mol−1
Appearance White solid
Density 1.58 g/cm3 (dodecahydrate)
2.40 g/cm3 (anhydrous)
Melting point 120 to 125 °C (248 to 257 °F; 393 to 398 K) (decomposition)
soluble
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Related salts are the sodium dithiophosphate undecahydrate Na3PO2S2·11H2O, sodium trithiophosphate undecahydrate Na3POS3·11H2O, and sodium tetrathiophosphate octahydrate Na3PS4·8H2O.[1]

Preparation

edit

Sodium monothiophosphate is prepared by the base hydrolysis of thiophosphoryl chloride using aqueous sodium hydroxide:[2][3]

PSCl3 + 6 NaOH + 9 H2O → Na3PO3S·12H2O + 3 NaCl

This reaction affords the dodecahydrate, which is easily dehydrated.

Partial dehydration over 6.5 M H2SO4 gives the nonahydrate. Under flowing N2, the anhydrous salt is formed.[4]

Sodium monothiophosphate decomposes at neutral pH. Silicone grease catalyses the hydrolysis of the monothiophosphate ion PO3S3−, so it is recommended that it is not used in the glass joints.[5]

In the anhydrous salt, the P-S bond is 211 pm and the three equivalent P-O bonds are short at 151 pm. These disparate values suggest that the P-S bond is single.[6]

References

edit
  1. ^ Elias, D. P. (1957). "Crystallographic Data on Some Sodium Phosphorothioates". Acta Crystallographica. 10 (9): 600. Bibcode:1957AcCry..10..600E. doi:10.1107/S0365110X57002108.
  2. ^ Stanley K. Yasuda; Jack L. Lambert (1957). "Sodium Monothiophosphate". Inorganic Syntheses. Vol. 5. pp. 102–104. doi:10.1002/9780470132364.ch28. ISBN 978-0-470-13236-4.
  3. ^ L. C. Washburn; R. L. Hayes (1977). "Importance of Excess Base in the Synthesis of Sodium Monothiophosphate: (Sodium Phosphorothioate)". Inorganic Syntheses. Vol. 17. pp. 193–4. doi:10.1002/9780470132487.ch53. ISBN 978-0-470-13248-7.
  4. ^ Palazzi, Marcel (1973). "Trisodium monothiophosphate. Radiocrystallographic study". Bulletin de la Société Chimique de France. 12: 3246–8.
  5. ^ Lucian C. Pop and M. Saito (2015). "Serendipitous Reactions Involving a Silicone Grease". Coordination Chemistry Reviews. 314: 64–70. doi:10.1016/j.ccr.2015.07.005.
  6. ^ Pompetzki, M.; Jansen, M. (2002). "Natriummonothiophosphat(V): Kristallstruktur und Natriumionenleitfähigkeit" [Sodium monothiophosphate(V). Crystal structure and sodium ionic conductivity]. Zeitschrift für Anorganische und Allgemeine Chemie. 628 (3): 641–646. doi:10.1002/1521-3749(200203)628:3<641::AID-ZAAC641>3.0.CO;2-8.