The Class CC 14000 were electric locomotives operated by SNCF in France. They were one of four classes, together with the BB 12000, BB 13000 and CC 14100 classes, that formed an experimental group for studying the practicality of the new French 25 kV 50 Hz AC electrification.[1] It was used in freight service along the Lille – Thionville line. They were nicknamed Fer à repasser (electric irons).[2]

SNCF CC 14000
Type and origin
Power typeElectric
BuilderCGCL-Oerlikon
Build date1955 (1955)-1959 (1959)
Total produced20
Specifications
Configuration:
 • UICCo′Co′
Gauge1,435 mm (4 ft 8+12 in)
Wheel diameter1.1 m (3 ft 7 in)
Wheelbase9.51 m (31 ft 2 in) ​
 • Bogie2.335 m (7 ft 7.9 in)
Length18.89 m (61 ft 11+34 in)
Loco weight125 tonnes (123 long tons; 138 short tons)
Electric system/s25 kV 50 Hz AC
Current pickup(s)Pantograph, 2 off
Traction motors6 FD 680 engines
940 V three-phase
Performance figures
Maximum speed60 km/h (37 mph)
Power output:
 • Continuous2,640 kW (3,540 hp)
Career
OperatorsSNCF
Number in class20
NumbersCC 14001 – CC 14020
Nicknames'Fers à repasser' (Flatirons)
Retired1981

History

edit

In this heavily industrialized area of the country with steep grades, the railway would pull heavy freight trains along the North-East line using SNCF 150.X steam locos, often requiring pusher locomotives to help move the trains along. The SNCF wanted to use only one locomotive on these trains and began studying the use of electric locomotives on the line.[3]

25 kV 50 Hz electrification

edit

Around 1950, France began a program of electrification with 25 kV at the 'industrial' frequency of 50 Hz. An experimental program was begun with four similar locomotive designs, one from each maker of electrical equipment, to find the best system. Investigating the electrification of the Lille – Thionville line, the CC 14000 were part of an order for 85 electric locomotives in 1952, each using a different system: five BB 12000 in a mono-continuous format with ignitron rectifiers, fifteen BB 13000 with direct motors, twenty four-phase CC 14000 and sixty-five CC 14100 with single phase-continuous rotating units.[4] The project was very successful, with 150 locomotives ordered in 1954 amongst the BB 12000, BB 13000, CC 14000 and CC 14100 series. The various locomotive types were used in experimenting with different ways of transforming current flowing from the traction network through transformers and rectifiers to the traction motors. As a result, the success of this trial led the SNCF to electrify its remaining lines, decided as being both economical and future-friendly.[5] The 14000s used a rather complex electric motor, prone to a multiplicity of various (mostly minor) breakdowns, yet frustratingly difficult enough to repair (one author explaining the breakdowns were suicide-inducing).[6]

In 1952, orders for 85 locomotives were placed: five BB 12000, fifteen BB 13000, twenty CC 14000, sixty five CC 14100.[7]

Design and Technical Details

edit

The locomotive captured 25 kV from the catenary, directing the electricity into the Oerlikon-built, three-phase squirrel cage electric motors without collectors that required only minimal maintenance. The 25 kV powers the primary transformer (located in lower center of the locomotive), reducing the current to 1,100 V which is then directed to a frequency converter which varies the current directed to the traction motors from 0 to 135 Hz.[3]

Like the CC 14100, the CC 14000 used a rotary converter. The extra weight of this equipment, compared to the BB 12000 and BB 13000, required extra axles to reduce individual axle load and so they were of C-C arrangement rather than B-B. However, this increased the pulling power.

The CC 14000 was the design produced by OC Oerlikon. It used three-phase AC traction motors.

Service history

edit
 
CC 14015 with a northbound mineral train on the Nord main line near Longueau (Somme), 1959

In total, 20 units were built. Their days appeared numbered by the 1970s, with units retired between 1978 and 1981.

Preservation

edit
 
CC 14018 at the Cité du Train

Notes

edit
  1. ^ Cuynet, Jean (2008). "Les débuts du courant "industriel" à la SNCF" [The beginnings of 'industrial' current on the SNCF] (PDF). J3eA, Journal sur l'Enseignement des Sciences et Technologies de l'Information et des Systèmes (in French). 7. EDP: 1–13. doi:10.1051/j3ea:2008040. Retrieved 1 September 2017.
  2. ^ "Annoncée en 2013". referencement-n.com. Retrieved March 10, 2019.
  3. ^ a b SNCF Archives : CC 14000 - BB 13000 - BB 12000 (film) (in French). Section centrale cinématographique. n.d. Event occurs at 0:13. Retrieved December 30, 2020.
  4. ^ CUYNET, Jean (2008). "Les débuts du courant " industriel " à la SNCF" (PDF). J3eA (in French). 7 (1): 0007-7–87. doi:10.1051/j3ea:2008040. Retrieved March 10, 2019.
  5. ^ Rusak, Ryszard (2009). "Lokomotywy elektryczne i spalinowe PRIMA". TTS Technika Transportu Szynowego (in Polish). 15 (6): 18–26. Retrieved March 10, 2019.
  6. ^ Blanc, André (2003). "La transition entre vapeur et électricité Exemples vécus (Mohon, Strasbourg, Noisy-le-Sec)". Revue d'histoire des chemins de fer (in French) (28–29): 286–319. doi:10.4000/rhcf.1780. Retrieved March 10, 2019. (heureusement, ils n'avaient pas, comme Vatel, d'épée à leur disposition !)
  7. ^ Cuynet (2008), p. 5.
  8. ^ "CC 14000 SNCF". Trains d’Europe (in French). Retrieved March 10, 2019.