Referential transparency

In computer science, referential transparency and referential opacity are properties of parts of computer programs. An expression is called referentially transparent if it can be replaced with its corresponding value (and vice-versa) without changing the program's behavior.[1] This requires that the expression be pure – its value must be the same for the same inputs and its evaluation must have no side effects. An expression that is not referentially transparent is called referentially opaque.

In mathematics, all function applications are referentially transparent, by the definition of what constitutes a mathematical function. However, this is not always the case in programming, where the terms procedure and method are used to avoid misleading connotations. A defining characteristic of functional programming is that it only allows referentially transparent functions. Other programming languages may provide means to selectively guarantee referential transparency. Some functional programming languages enforce referential transparency for all functions.

The importance of referential transparency is that it allows the programmer and the compiler to reason about program behavior as a rewrite system. This can help in proving correctness, simplifying an algorithm, assisting in modifying code without breaking it, or optimizing code by means of memoization, common subexpression elimination, lazy evaluation, or parallelization.


The concept seems to have originated in Alfred North Whitehead and Bertrand Russell's Principia Mathematica (1910–13).[2] It was adopted in analytical philosophy by Willard Van Orman Quine. In §30 of Word and Object (1960) Quine gives this definition:

A mode of containment φ is referentially transparent if, whenever an occurrence of a singular term t is purely referential in a term or sentence ψ(t), it is purely referential also in the containing term or sentence φ(ψ(t)).

The term appeared in its contemporary computer science usage, in the discussion of variables in programming languages, in Christopher Strachey's seminal set of lecture notes Fundamental Concepts in Programming Languages (1967). The lecture notes referenced Quine's Word and Object in the bibliography.

Examples and counterexamplesEdit

If all functions involved in the expression are pure functions, then the expression is referentially transparent.

Consider a function that returns the input from some source. In pseudocode, a call to this function might be GetInput(Source) where Source might identify a particular disk file, the keyboard, etc. Even with identical values of Source, the successive return values will be different. Therefore, function GetInput() is neither deterministic nor referentially transparent.

A more subtle example is that of a function that has a free variable, i.e., depends on some input that is not explicitly passed as a parameter. This is then resolved according to name binding rules to a non-local variable, such as a global variable, a variable in the current execution environment (for dynamic binding), or a variable in a closure (for static binding). Since this variable can be altered without changing the values passed as parameter, the results of subsequent calls to the function may differ even if the parameters are identical. However, in pure functional programming, destructive assignment is not allowed, and thus if the free variable is statically bound to a value, the function is still referentially transparent, as neither the non-local variable nor its value can change, due to static binding and immutability, respectively.

Arithmetic operations are referentially transparent: 5 * 5 can be replaced by 25, for instance. In fact, all functions in the mathematical sense are referentially transparent: sin(x) is transparent, since it will always give the same result for each particular x.

Reassignments are not transparent. For instance, the C expression x = x + 1 changes the value assigned to the variable x. Assuming x initially has value 10, two consecutive evaluations of the expression yield, respectively, 11 and 12. Clearly, replacing x = x + 1 with either 11 or 12 gives a program with different meaning, and so the expression is not referentially transparent. However, calling a function such as int plusone(int x) { return x + 1; } is transparent, as it will not implicitly change the input x and thus has no such side effects.

today() is not transparent, as if you evaluate it and replace it by its value (say, "Jan 1, 2001"), you don't get the same result as you will if you run it tomorrow. This is because it depends on a state (the date).

In languages with no side-effects, like Haskell, we can substitute equals for equals: i.e. if x == y then f(x) == f(y). This is a property also known as indistinguishable identicals. Such properties need not hold in general for languages with side-effects. Even so, it is important to limit such assertions to so-called judgmental equality, that is the equality of the terms as tested by the system, not including user-defined equivalence for types. For instance, if B f(A x) and the type A has overridden the notion of equality, e.g. making all terms equal, then it is possible to have x == y and yet find f(x) != f(y). This is because systems like Haskell do not verify that functions defined on types with user-defined equivalence relations be well-defined with respect to that equivalence. Thus the referential transparency is limited to types without equivalence relations. Extending referential transparency to user-defined equivalence relations can be done for example with a Martin-Lof identity type, but requires a dependently typed system such as in Agda, Coq or Idris.

Contrast to imperative programmingEdit

If the substitution of an expression with its value is valid only at a certain point in the execution of the program, then the expression is not referentially transparent. The definition and ordering of these sequence points are the theoretical foundation of imperative programming, and part of the semantics of an imperative programming language.

However, because a referentially transparent expression can be evaluated at any time, it is not necessary to define sequence points nor any guarantee of the order of evaluation at all. Programming done without these considerations is called purely functional programming.

One advantage of writing code in a referentially transparent style is that given an intelligent compiler, static code analysis is easier and better code-improving transformations are possible automatically. For example, when programming in C, there will be a performance penalty for including a call to an expensive function inside a loop, even if the function call could be moved outside of the loop without changing the results of the program. The programmer would be forced to perform manual code motion of the call, possibly at the expense of source code readability. However, if the compiler is able to determine that the function call is referentially transparent, it can perform this transformation automatically.

The primary disadvantage of languages that enforce referential transparency is that they make the expression of operations that naturally fit a sequence-of-steps imperative programming style more awkward and less concise. Such languages often incorporate mechanisms to make these tasks easier while retaining the purely functional quality of the language, such as definite clause grammars and monads.

Another exampleEdit

As an example, let's use two functions, one which is referentially transparent, and the other which is referentially opaque:

int g = 0;

int rt(int x) {
  return x + 1;

int ro(int x) {
  return x + g;

The function rt is referentially transparent, which means that if x == y then rt(x) == rt(y). For instance, rt(6) = 7. However, we cannot say any such thing for ro because it uses a global variable that it modifies.

The referential opacity of ro makes reasoning about programs more difficult. For example, say we wish to reason about the following statement:

int i = ro(x) + ro(y) * (ro(x) - ro(x));

One may be tempted to simplify this statement to:

int i = ro(x) + ro(y) * 0;
int i = ro(x) + 0;
int i = ro(x);

However, this will not work for ro because each occurrence of ro(x) evaluates to a different value. Remember that the return value of ro is based on a global value that is not passed in and which gets modified on each call to ro. This means that mathematical identities such as xx = 0 no longer hold.

Such mathematical identities will hold for referentially transparent functions such as rt.

However, a more sophisticated analysis can be used to simplify the statement to:

int tmp = g; int i = x + tmp + 1 + (y + tmp + 2) * (x + tmp + 3 - (x + tmp + 4)); g = g + 4;
int tmp = g; int i = x + tmp + 1 + (y + tmp + 2) * (x + tmp + 3 - x - tmp - 4)); g = g + 4;
int tmp = g; int i = x + tmp + 1 + (y + tmp + 2) * (-1); g = g + 4;
int tmp = g; int i = x + tmp + 1 - y - tmp - 2; g = g + 4;
int i = x - y - 1; g = g + 4;

This takes more steps and requires a degree of insight into the code infeasible for compiler optimization.

Therefore, referential transparency allows us to reason about our code which will lead to more robust programs, the possibility of finding bugs that we couldn't hope to find by testing, and the possibility of seeing opportunities for optimization.

See alsoEdit


  1. ^ John C. Mitchell (2002). Concepts in Programming Languages. Cambridge University Press. p. 78.
  2. ^ Alfred North Whitehead; Bertrand Russell (1927). Principia Mathematica. Vol. 1 (2nd ed.). Cambridge University Press. Here: p.665. According to Quine, the term originates from there.

External linksEdit